Abstract
Micro-indentation tests at scales on the order of sub-micron have shown that the measured hardness increases strongly with the indent depth or indent size decreasing, which is frequently referred to as the size effect. However, the trend is at odds with the size-independence implied by conventional elastic-plastic theory. In this paper, strain gradient plasticity theory is used to model the size effect for materials undergoing the micro-indenting. Meanwhile, the micro-indentation experiments for single crystal copper and single crystal aluminum are carried out. By the comparison of the theoretical predictions with experimental measurements, the micro-scale parameter of strain gradient plasticity theory is predicted, which is fallen into the region of 0.8–1.5 micron for the conventional metals such as copper (Cu), aluminum (Al) and silver (Ag). Moreover, the phenomena of the pile-up and sink-in near micro-indent boundary are investigated and analyzed in detail.
Similar content being viewed by others
References
Nix, W. D., Gao, H., Indentation size effects in crystalline materials: a law for strain gradient plasticity, J. Mech. Phys. Solids, 1998, 46(3): 411.
McElhaney, K. W., Vlassak, J. J., Nix, W. D., Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments, J. Mater. Res., 1998, 13(5): 1300.
Begley, M., Hutchinson, J. W., The mechanics of size-dependent indentation, J. Mech. Phys. Solids, 1998, 46: 1029.
Shu, J. Y., Fleck, N. A., The prediction of a size effect in micro-indentation, Int. J. Solids Structures, 1998, 35(13): 1363.
Poole, W. J., Ashby, M. F., Fleck, N. A., Micro-hardness tests on annealed and work-hardened copper polycrystals, Scripta Metal1 Mater, 1996, 34: 559.
Atkinson, M., Further analysis of the size effective in indentation hardness tests of some metals, J. Mater. Res., 1995, 10: 2908.
Ma, Q., Clarke, D. R., Size dependent hardness of silver single crystals, J. Mater. Res., 1995, 10: 853.
Stelmashenko, N. A., Walls, M. G., Brown, L. M. et al., Microindentation on W and Mo priented single crystals: an STM study, Acta Metall Mater, 1993, 41: 2855.
Cheng, Y. T., Cheng, C. M., Scaling relationships in conical indentation of elastic-perfectly plastic solids, Int. J. Solids Structures, 1999, 36: 1231.
Fleck, N. A., Hutchinson, J. W., Strain gradient plasticity, in Advances in Applied Mechanics (eds. Hutchinson, J. W., Wu, T. Y.), 1997, 33: 295.
Gao, H., Huang, Y., Nix, W. D. et al., Mechanism-based strain gradient plasticity - I, Theory. J Mech Phys Solids, 1999, 47: 1239.
Aifantis, E. C., On the microstructural origin of certain inelastic models, Trans. ASME J. Eng. Mater. Tech., 1984, 106: 326.
Wei, Y., Hutchinson, J. W., Steady-state crack growth and work of fracture for solids characterized by strain gradient plasticity, J. Mech. Phys. Solids, 1997, 45(8): 1253.
Timoshenko, S. P., Goodier, J. N., Theory of Elasticity, 3rd ed., New York: McGraw-Hill, Inc., 1970, 401.
Shaw, M. C, In Mechanical Behavior of Materials (eds. McClintock, F. A., Argon, A. S.), Reading: Addison-Wesley, 1966, 443.
Xia, Z. C., Hutchinson, J. W., Crack tip fields in strain gradient plasticity, J. Mech. Phys. Solids, 1996, 44: 1621.
Chen, J. Y., Wei, Y., Huang, Y. t a1., The crack tip fields in strain gradient plasticity: the asymptotic and numerical analyses, Eng. Fract. Mech., 1999, 64: 625.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wei, Y., Wang, X., Wu, X. et al. Theoretical and experimental researches of size effect in micro-indentation test. Sci. China Ser. A-Math. 44, 74–82 (2001). https://doi.org/10.1007/BF02872285
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02872285