Abstract
The fault structure of MCT crystals was studied by means of X-ray topography and transmission electron microscopy. Subgrain boundaries were revealed and identified by both techniques, and their tilt angle was calculated to be of the order of 10-3 rad. The dislocations which form the subgrain boundaries were identified by TEM to have Burger‘s vectors parallel to the <110> directions. Twins in large numbers were observed by TEM. The twins were identified to have a {111} habit plane.
Similar content being viewed by others
References
R.F. Brebrick and A.J. Strauss, J. Phys. Chem. Solids26, 989 (1965).
J.L. Schmit and C.J. Speerschneider, Infrared Physics8, 247 (1968).
J. Blair and R. Newnham, “Metallurgy of Elemental and Compound Semiconductors” 12 (Wiley (Interscience), New York, 1961), p. 393.
R.I. Delves and B. Lewis, J. Phys. Chem. Solids24, 549 (1963).
J.C. Woolley and B. Ray, ibid13, 151 (1960).
B. Ray and P.M. Spencer, Phys. Status Solidi22, 371 (1967).
C.J. Gillham and R.A. Farrar, J. of Mat. Sci.12, 1994 (1977).
M. Brown and A.F.W. Willoughby, Journal de PhysiqueC6, 151 (June 1979).
E. Finkman and Y. Nemirovsky, J. Appl. Phys.50, 4356 (1979).
L.N. Swink and M.J. Brau, Metall. Trans.1, 629 (1970).
R.A. Reynolds et al., inThe Physics of Semimetals and Narrow Gap Semiconductors, Edited by D.L. Carter and R.T. Bate, p. 511, Pergamon Press (1971).
D.B. Holt, J. Phys. Chem. Solids23, 1353 (1962).
E.L. Hall and J.B. Vander Sande, Philos. Mag. A37 (1) 137 (1978).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mirsky, U., Shechtman, D. Transmission electron microscopy and x-ray topography study of mercury-cadmium-telluride. J. Electron. Mater. 9, 933–943 (1980). https://doi.org/10.1007/BF02822727
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02822727