Abstract
An indigenous sol-gel derived yttria-partially stabilized zirconia (Y-PSZ) powder has been characterized and its suitability for plasma spraying applications evaluated. The powder, determined to have about 5·1% yttria content, predominantly consisted of spherical particles with an average equivalent particle diameter close to 25µm. Furthermore, it was found that the powder did not contain any particles >50µm, which is considered the ideal upper size limit for spray-grade ceramic powders in order to ensure complete melting during spraying. The sol-gel produced powder exhibited good flow characteristics and the plasma sprayed coatings developed using this powder were also found to have excellent thermal shock resistance. The corresponding results obtained using an imported Y-PSZ powder are also presented for the purpose of comparison.
Similar content being viewed by others
References
Bennett A 1986Mater. Sci. Tech. 2 257
Burgel R and Kvernes I 1986 inHigh temperature alloys for gas turbines and other applications (ed.) W Betz (Holland: Reidel Publishing Co.)
Fairbanks J W and Hecht R J 1987Mater. Sci. Engg. 88 321
Herman H 1990Adv. Mater. Processes 137 41
Houck D L 1982Int. J. Powder Met. Powder Tech. 18 1
Joshi S V and Sivakumar R 1992Mater. Sci. Tech. 8 481
Kvernes I 1987 inHigh tech ceramics (ed) P Vincenzini (Amsterdam: Elsevier Science Publishers)
Kvernes I, Espeland M and Norholm O 1988Scandinavian J. Metall. 17 8
Kvernes I, Lugscheider E and Lindbolm Y 1989Proc. 2nd European symp. on engg. cer. (ed) F L Riley (New York: Elsevier Applied Science)
Meier S M, Gupta D K and Sheffler K D 1991J. Metals 43 50
Miller R A, Smialek J L and Garlick R G 1981 inScience and technology of zirconia: advances in ceramics (eds) A H Heuer and L W Hobbs (Westerville, OH: The American Ceramic Society) Vol. 3
Miller R A 1987Surf. Coat. Tech. 30 1
Rhys-Jones T N 1990Surf. Coat. Tech. 42 1
Sivakumar R 1989 inPowder metallurgy—recent advances (eds) V S Arunachalam and O V Roman (New Delhi: Oxford & IBH Pub. Co.)
Srivastava M P, Joshi S V, Sarma V S R A, Jayaram D and Sivakumar R 1991 DMRL Technical Report No. 91146
Wilson G and Heathcoat R 1990Am. Ceram. Soc. Bull. 69 1137
Wu B C, Chao C H, Chang E and Chang T C 1990Mater. Sci. Engg. A124 215
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Joshi, S.V., Srivastava, M.P., Chatterjee, M. et al. Plasma spraying of an indigenous yttria stabilized zirconia powder prepared by the sol-gel technique. Bull. Mater. Sci. 16, 19–28 (1993). https://doi.org/10.1007/BF02745303
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02745303