Abstract
Vibration is an effective tool in detecting and diagnosing some of the incipient failures of machines and equipment. The present paper deals with the basic principles, which may help in identifying its diagnostic ability, the scope of its diagnostic capabilities, the instrumentation in vogue for its monitoring and the state-of-the-art of the monitoring techniques and programs. A few case studies are also given to illustrate how machine troubles/failures are diagnosed with the help of vibration signatures.
Similar content being viewed by others
References
Collacott R A 1973Mechanical fault diagnosis (London: Chapman and Hall)
Collacott R A 1977Fault diagnosis and condition monitoring (London: Chapman and Hall)
Gupta K N 1986 Vibration monitoring — an overview.Proc. Workshop on Diagnostic Maintenance, New Delhi, pp 45–62
Gupta K N 1990 Vibration monitoring — state-of-the-art and future trends.Proc. State-of-Art and Future Vision Seminar on Condition Monitoring, New Delhi, pp II/1–16
Gupta K N, Yadava G S 1991 Vibration problem at NDE bearing of the generator at Anta Gas Project. Report submitted to NTPC, New Delhi
Gupta K N, Asnani N T, Nakra B C, Tandon N 1986 Cause analysis of dryer foundation vibrations at IPCL Complex, Baroda.Proc. Workshop on Performance Assurance in Machinery, Ahmedabad, pp MD 1–8
Gupta K N, Gupta K, Reddy P V 1988 Diagnosis of BFP inter-connecting piping vibration through signature analysis.Proc. 17th National Convention on Maintenance Management for Higher Productivity, IIPE, Jamshedpur, pp III/2/1–18
Pattabiraman J, Srinivasan R, Bhattacharjee D K 1986 Vibration studies on a suction piping of a boiler feed pump.Symp. on Vibration Problems in Nuclear Power Stations, Bombay
Simpson H C, Tramschek A B 1974 Pulsations in power station feed pump systems.Proc. Inst. Mech. Engineers, Conf. on Component Interaction in Fluid Flow Systems, London
Tranter J 1989 The fundamentals of, and the application of computers to condition monitoring and predictive maintenance.Proc. Int. Congress on Condition Monitoring and Diagnostic Engineering (COMADEM 1989), pp 372–377
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gupta, K.N. Vibration — A tool for machine diagnostics and condition monitoring. Sadhana 22, 393–410 (1997). https://doi.org/10.1007/BF02744480
Issue Date:
DOI: https://doi.org/10.1007/BF02744480