Abstract
We discuss the advantages and problems associated with fitting geometric data of the human torso obtained from magnetic resonance imaging, with high-order (bicubic Hermite) surface elements. These elements preserve derivative (C 1) continuity across element boundaries and permit smooth anatomically accurate surfaces to be obtained with relatively few elements. These elements are fitted to the data with a new nonlinear fitting procedure that minimizes the error in the fit while maintainingC 1 continuity with nonlinear constraints. Nonlinear Sobelov smoothing is also incorporated into this fitting scheme. The structures fitted along with their corresponding root meansquared error, number of elements used, and number of degrees of freedom (df) per variable are: epicardium (0.91 mm, 40 elements, 142 df), left lung (1.66 mm, 80 elements, 309 df), right lung (1.69 mm, 80 elements, 309 df), skeletal muscle surface (1.67 mm, 264 elements, 1,010 df), fat layer (1.79 mm, 264 elements, 1,010 df), and the skin layer (1.43 mm, 264 elements, 1,010 df). The fitted surfaces are assembled into a combined finite element/boundary element model of the torso in which the exterior surfaces of the heart and lungs are modeled with two-dimensional boundary elements and the layers of the skeletal muscle, fat, and skin are modeled with finite elements. The skeletal muscle and fat layers are modeled with bicubic Hermite linear elements and are obtained by joining the adjacent surface elements for each layer. Applications for the torso model include the forward and inverse problems of electrocardiography, defibrillation studies, radiation dosage studies, and heat transfer studies.
Similar content being viewed by others
References
Gill, P. E., W. Murray, M. A. Saunders, and M. H., Wright. User’s Guide for NPSOL (Version 4.0): A Fortran Package for Nonlinear Programming. Technical Report SOL 86-2. Stanford, CA: Department of Operations Research, Stanford University, 1986, pp. 1–54.
Gulrajani, R. M., and G. E. Mailloux. A simulation study of the effects of torso inhomogeneities on electrocardiographic potentials, using realistic heart and torso models.Circ. Res. 52:43–56.
Huiskamp, G. J., and A. van Oosterom. The depolarization sequence of the human heart surface computed from measured body surface potentials.IEEE Trans. Biomed. Eng. 35:1047–1059, 1988.
Johnson, C. R., R. S. MacLead, and P. R. Ershler. A computer model for the study of electrical current flow in the human thorax.Comput. Biol. Med. 22:305–323, 1992.
Jorgenson, D. B., D. R. Haynor, G. H. Bardy, and Y. Kim. Computational studies of transthoracic and transvenous defibrillation in a detailed 3-D human thorax model.IEEE Trans. Biomed. Eng. 42:172–184, 1995.
Karlon, W. J., S. R. Eisenberg, and H. L. Lehr. Effects of paddle placement and size on defibrillation current distribution: a three-dimensional finite element model.IEEE Trans. Biomed. Eng. 40:246–255, 1993.
McFee, R., and S. Rush. Qualitative effects of thoracic resistivity variations on the interpretation of the electrocardiogram: the low resistance surface layer.Am. Heart J. 74:48–61, 1968.
Nielsen, P. M. F., I. J. Le Grice, B. H. Smaill, and P. J. Hunter. Mathematical model of geometry and fibrous structure of the heart.Am. J. Physiol. 260:H1365-H1378 1991.
Petera, J., and J. F. T. Pittman. Isoparametric hermite elements.Int. J. Numer. Methods Eng. 37:3489–3519, 1994.
Stanley, P. C., and T. C. Pilkington. The combination method: a numerical technique for electrocardiographic calculations.IEEE Trans. Biomed. Eng. 36:456–461, 1989.
Stanley, P. C., T. C. Pilkington, M. N. Morrow, and R. E., Ideker. An assessment of variable thickness and fiber orientation of the skeletal muscle layer on electrocardiographic calculations.IEEE Trans. Biomed. Eng. 38:1069–1076, 1991.
Terzopoulos, D.. Regularization of inverse visual problems involving discontinities.IEEE Trans. Pattern Anal. Machine Intell. PAMI-8:413–424, 1986.
Tikhonov, A., and V. Arsenin. Solution of Ill-Posed Problems. Washington, D.C.: John Wiley and Sons, 1977.
Young, A. A., P. J. Hunter, and B. H. Smaill. Epicardial surface estimation from coronary angiograms.Comput. Vision Graphics Image Process. 47:111–127, 1989.
Zienkiewicz, O. C., and R. L. Taylor. The Finite Element Method, fourth edition. Berkshire, UK: McGraw-Hill Book Company Europe, 1994.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bradley, C.P., Pullan, A.J. & Hunter, P.J. Geometric modeling of the human torso using cubic hermite elements. Ann Biomed Eng 25, 96–111 (1997). https://doi.org/10.1007/BF02738542
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02738542