Abstract
Chemical stability, mechanical behaviour and biocompatibility in body fluids and tissues are the basic requirements for successful application of implant materials in bone fractures and replacements. Corrosion is one of the major processes affecting the life and service of orthopaedic devices made of metals and alloys used as implants in the body. Among the metals and alloys known, stainless steels (SS), Co-Cr alloys and titanium and its alloys are the most widely used for the making of biodevices for extended life in human body. Incidences of failure of stainless steel implant devices reveal the occurrence of significant localised corroding viz., pitting and crevice corrosion. Titanium forms a stable TiO2 film which can release titanium particles under wear into the body environment. To reduce corrosion and achieve better biocompatibility, bulk alloying of stainless steels with titanium and nitrogen, surface alloying by ion implantation of stainless steels and titanium and its alloys, and surface modification of stainless steel with bioceramic coatings are considered potential methods for improving the performance of orthopaedic devices. This review discusses these issues in depth and examines emerging directions.
Similar content being viewed by others
References
Arumugam T K 1998In vitro and in vivo electrochemical corrosion studies on modified stainless steel materials for orthopaedic implant applications. Ph D thesis, University of Madras, Chennai
Arumugam T K, Rajeswari S, Subbaiyan M 1997In vitro electrochemical investigations of titanium stabilized stainless steels for applications as orthopaedic implants.Bull. Electrochem. 13: 103–106
Arumugam T K, Rajeswari S, Subbaiyan M 1998In vitro electrochemical investigations on super austenitic stainless steels for applications as orthopaedic implants. InBiomedical materials and devices — New frontiers (ed) M Jayabalan (Trivandrum: SCTIMST) pp 61–65
Arumugam T K, Rajeswari S, Subbaiyan M 1998 Electrochemical behaviour of advanced stainless steel implant material in saline physiological solution with calcium and phosphate ions and serum proteins.Trans. Indian Inst. Met. 51: 417–22
Asokamani R, Balu R, Bhuvaneswaran N, Kamachi Mudali U 2000In vitro corrosion investigations on nitrogen ion implanted Ti-6Al-7Nb alloy.Proc. Seventh Int. Symp. on Electrochemical Methods in Corrosion Research (EMCR), Hungary, Paper No. 110
Bates J B 1973 Cathodic protection to prevent crevice corrosion of stainless steel in halide media.Corrosion 29: 28–32
Breme J, Biehl V, Hoffmann A 2000 Tailor-made composites on titanium for medical devices.Adv. Eng. Mater. 2: 270–275
Chai C, Nissan B B, Pyke S, Evans L 2001 Sol-gel derived hydroxylapatite coatings for biomédical applications.Surface modification technologies on CD (ASM International)
Chu T M G, Halloran T W, Hollister S J, Fainberg C E 2001 Hydroxyapatite implants designed with internal architecture.J. Mater. Sci. Mater. Med, 12: 471–478
Clayton C R 1986 Passivity mechanisms in stainless steels. MO-N Synergism Report no. N00014-85-K-0437, New York
Clayton C R, Lu Y C 1986 A bipolar model of the passivity of stainless steel: The role of Mo addition.J. Electrochem. Soc. 13: 2465–2473
Dobbs H S 1982 Fracture of titanium orthopaedic implants.J. Mater. Sci. 17: 2398–94
Fontana M G, Greene N D 1987Corrosion engineering (New York: McGraw-Hill)
Geetha M, Kamachi Mudali U, Pandey N D, Gogia A K, Asokamani R, Baldev Raj 2001In vitro corrosion behaviour of laser nitrided Ti-13Nb-13Zr alloy.Proc. of the First Asian-Pacific Conference and 6th National Convention on Corrosion on CD, Nov 28–30
GeethaM, Kamachi Mudali U, Gogia A K, Asokamani R, Baldev Raj 2002 Influence of microstructural changes on the corrosion behaviour of beta-rich titanium alloys.Corros. Sci. (communicated)
Groot K de, Wolke J G C, Jansen J A 1998 Calcium phosphate coatings for medical implants.Inst. Mech. Eng. 212: 137–147
Helmus M N, Tweden K 1995 Materials selection. InEncyclopedic handbook of biomaterials and bioengineering, Part A: Materials (eds) D L Wise, D J Trantolo, D E Altobelli, M J Yaszemski, J D Gresser, E R Schwartz (New York: Marcel Dekker) pp 27–45
Hench L L, Ethridge E C 1982Biomaterials: An interfacial approach (New York: Academic Press)
Hench L L 1985 Inorganic biomaterials. InAdvances in chemistry series 245: Materials chemistry — an emerging discipline (eds) L V Interranate, L A Caspar, A B Ellis (Washington DC: American Chemical Society) p. 523
Hench L L 1991 Bioceramics: From concept to clinic.J. Am. Ceram. Soc. 14: 1487–1510
Hu J, Zhano Z J, Li L X 1993 Corrosion fatigue resistance of surgical implant stainless steels and titanium alloys.Corros. Sci. 35: 587–97
Kamachi Mudali U 1993Studies on pitting, intergranular corrosion and passive film of nitrogen-bearing austenitic stainless steels. Ph D thesis, University of Madras
Kamachi Mudali U, Dayal R K 2000 Influence of nitrogen addition on crevice corrosion resistance of nitrogen-bearing austenitic stainless steels.J. Mater. Sci. 35: 1799–1803
Kamachi Mudali U, Katada Y 2001 Electrochemical atomic force microscopic studies on passive films on nitrogen-bearing austenitic stainless steels.Electrochim. Acta 46: 3735–3742
Kamachi Mudali U, Dayal R K, Gill T P S, Gnanamoorthy J B 1986 Influence of microstructure and pitting corrosion resistance of austenitic welds metals.Werkstoffe Korrosion 37: 637–643
Kamachi Mudali U, Dayal R K, Gill T P S, Gnanamoorthy J B 1990 Pitting corrosion resistance of nitrogen-added AISI type 304 SS weld metal with different heat inputs.Corrosion 37: 454–460
Kamachi Mudali U, Dayal R K, Gnanamoorthy J B, Rodriguez P 1996a Influence of thermal ageing on the intergranular corrosion resistance of nitrogen-bearing austenitic stainless steels.Metal. Trans. A27: 2881–2887
Kamachi Mudali U, Dayal R K, Gnanamoorthy J B, Rodriguez P 1996b Pitting corrosion studies on nitrogen-bearing types 304, 316 and 317 stainless steels.Mater. Trans. Jap. Inst. Metal. 37: 1568–1573
Kamachi Mudali U, Dayal R K, Gnanamoorthy J B, Rodriguez P 1996c Relationship between pitting and intergranular corrosion of nitrogen-bearing austenitic stainless steels.ISIJ Int. 36: 799–806
Kamachi Mudali U, Dayal R K, Venkadesan S, Gnanamoorthy J B 1996d Influence of titanium addition on pitting, crevice corrosion and intergranular corrosion resistances of type 316 stainless steels.Met. Mater. Process. 8: 139–146
Kamachi Mudali U, Dayal R K, Gnanamoorthy J B, Rodriguez P 1997a Role of nitrogen in improving the passive film stability and pitting corrosion resistance of austenitic stainless steels.Trans. Indian Inst. Met. 50: 37–47
Kamachi Mudali U, Sundararajan T, Nair K G M, Dayal R K 1997b Nitrogen ion implantation of type 316 stainless steel to improve intergranular and pitting corrosion resistances.Corrosion and its control (eds) A S Khanna, M K Totlani, S K Singh (Amsterdam: Elsevier) vol 2, pp 566–573
Kamachi Mudali U, Ningshen S, Dayal R K 1999a Study of passive films of nitrogen-bearing austenitic stainless steels using electrochemical impedance spectroscopy.Bull. Electrochem. 15: 74–78
KamachiMudali U, Ningshen S, Tyagi A K, Dayal R K 1999b Influence of metallurgical and chemical variables on the pitting corrosion behaviour of nitrogen-bearing austenitic stainless steels.Mater. Sci. Forum 318-320: 495–502
KamachiMudali U, Reynders B, Stratmann M 1999c Localised corrosion behaviour of Fe-N model alloys.Corros. Sci. 41: 179–189
KamachiMudali U, Shankar P, Sundararaman D, Dayal R K 1999d Microstructural and electrochemical studies in thermally aged type 316LN stainless steels.Mater. Sci. Tech. 15: 1451–1453
KamachiMudali U, Sundararajan T, Loganathan E, Nair K G M, Dayal R K 1999e Pitting and intergranular corrosion resistances of nitrogen ion implanted type 304 stainless steel.Mater. Sci. Forum 318-320: 531–538
KamachiMudali U, Pujar M G, Dayal R K 2000 On the pitting corrosion resistance of as-welded and thermally aged nitrogen-bearing type 316 stainless steel weld metal.Mater. Sci. Technol. 16: 393–398
Kasuga T, Mizuno T, Watanabe M, Nogami M, Niinomi M 2001 Calcium phosphate invert glass-ceramic coatings joined by self-development of compositionally gradient layers on a titanium alloy.Biomaterials 22: 577–582
Khor K A, Wang Y 2001 Functionally Graded Coatings for Biomédical Applications.Surface Modification Technologies on CD (ASM International)
Kruger J 1979 Fundamental aspects of corrosion of metallic implants. InCorrosion and degradation of implant materials (eds) B C Syrett, A Acharya, ASTM STP 684, pp 107–113
Lin J H C, Kuo K H, Ding S J, Ju C P 2001 Surface reaction of stoichiometric and calcium deficient hydroxyapatite in simulated body fluid.J. Mater. Sci. Mater. Med. 12: 731–741
Liu Y, Layrolle P, Bruijn D, van Blitterswijk J, de Groot C K 2001 Biomimetic coprecipitation of calcium phosphate and bovine serum albumin on titanium alloy.J. Biomed. Mater. Res. 57: 327–335
Li F, Feng Q L, Cui F Z, Li H D, Schubert H 2002 A simple biomimetic method for calcium phosphate coating.Surf. Coat. Technol. (in press)
Lugscheider E, Remer P, Nyland A 2001 High velocity oxy fuel spraying: An alternative to the established APS-process for production of bioactive coatings.Surface modification technologies on CD (ASM International)
Park E, Condrate Sr R A 1999 Graded coatings of hydroxyapatite and titanium by atmospheric plasma spraying.Mater. Lett. 40: 228–234
Park J P, Lakes R S 1992Biomaterials: An introduction 2nd edn (New York: Plenum)
Pfaff H G, Willmann G, Pothig R 1993 Properties of HA-Coatings. InBioceramics (eds) P Ducheyne, D Christiansen (London: Butterworth-Heinemann) vol 6, pp 421–424
Pholer OEM 1986 Failure of orthopaedic metallic implants.ASM handbook on failure analysis and prevention 9th edn (Metals Park, OH: ASM International) vol 11, p 670
Platon F, Fournier P, Rouxel S 2001 Tribological behaviour of DLC coatings compared to different materials used in hip-joint prostheses.Wear 250: 227–236
Pujar M G, Kamachi Mudali U, Dayal R K, Gill T P S 1992 Susceptibility of as-welded and thermally aged type 316LN weldments towards pitting and intergranular corrosion.Corrosion 48: 579–586
Shreir L L, Jarman R A, Brustein G T 1994Corrosion. Vol.1: Metal/environment reactions, Vol. 2: Corrosion control 3rd edn (London: Butterworth Heinemann)
Silver F H 1994Biomaterials medical devices and tissue engineering: An intergrated approach. (London: Chapman & Hall)
Silver F, Doillon C 1989Biocompatibility: Interactions of biological and implantable materials (New York: VCH Publishers) vol. 1
Sivakumar M 1992In vitro corrosion and failure investigations on stainless steel orthopaedic implant devices. PhD thesis, University of Madras, Chennai
Sivakumar M, Rajeswari S 1992 Investigations of failures in stainless steel orthopaedic implant devices: Pit induced stress corrosion cracking.J. Mater. Sci. Lett. 11: 1039–1042
Sivakumar M, Kamachi Mudali U, Rajeswari S 1993a Compatibility of ferritic and duplex stainless steels as implant materials.J. Mater. Sci. 28: 6081–6086
Sivakumar M, Kamachi Mudali U, Rajeswari S 1993b Nitrogen-bearing austenitic stainless steels -A promising replacement for currently used 316L stainless steel orthopaedic implant material.Proc. Twelfth Inter. Corros. Congress, Houston (TX), vol. 3B, pp 1942–1948
Sivakumar M, Kamachi Mudali U, Rajeswari S 1993c Pit-induced corrosion failures in stainless steel orthopaedic implant devices.Proc. Twelfth Inter. Corros. Congress, Houston (TX), vol. 3B, pp 1949–1956
Sivakumar M, Kamachi Mudali U, Rajeswari S 1994 Investigation of failures in stainless steel orthopaedic implant devices: Fatigue failure due to improper fixation of a compression bone plate.J. Mater. Sci. Lett. 13: 142–145
Sivakumar M, Kamachi Mudali U, Rajeswari S 1994In vitro electrochemical investigations of stainless steels for orthopaedic implant applications.J. Mater. Eng. Perform. 3: 744–753
Sivakumar M, Kamachi Mudali U, Rajeswari S 1994a Investigation of failures in stainless steel orthopaedic implant device.Steel Res. 65: 76–79
Sivakumar M, Kamachi Mudali U, Rajeswari S 1994b Investigation of fatigue failure of a stainless steel orthopaedic implant device.J. Mater. Eng. Perform. 3: 111–114
Sivakumar M, Suresh Kumar Dhanadurai K, Rajeswari S, Thulasiraman V 1995a Failures in stainless steel orthopaedic implant devices: A survey.J. Mater. Sci. Lett. 14: 351–354
Sivakumar M, Kamachi Mudali U, Rajeswari S 1995b Investigation of failures in stainless steel orthopaedic implant devices: Pit induced fatigue cracks.J. Mater. Sci. Lett. 14: 148–151
Sousa S R, Barbosa M A 1991 Electrochemistry of AISI 316L stainless steel in calcium phosphate and protein solutions.J. Mater. Sci. Mater. Med. 2: 19–26
Sridhar T M 2001Synthesis, electrophoretic deposition and characterization of hydroxyapatite coatings on type 316L SSfor orthopaedic applications. Ph D thesis, University of Madras, Chennai
Sridhar T M, Arumugam T K, Rajeswari S, Subbaiyan M 1997 Electrochemical behaviour of hydroxyapatite-coated stainless steel implants.J. Mater. Sci. Lett. 16: 1964–67
Sridhar T M, Rajeswari S, Subbaiyan M 1998 Effect of current density on hydroxyapatite coatings on 316L stainless steel and its polarisation behaviour. InBiomédical materials and devices — New frontiers (ed) M Jayabalan (Trivandrum: SCTIMST) pp 52–56
Sridhar T M, Rajeswari S, Subbaiyan M 1999In vitro electrochemical characterisation of hydroxyapatite coated stainless steel implants in the presence of serum proteins.Bull. Electrochem. 15: 139–142
Sridhar TM, Kamachi Mudali U, Rajeswari S, Subbaiyan M 2000a Electrochemical impedance studies on hydroxyapatite coated type 316L stainless steel.Proc. Seventh Int. Symp. on Electrochemical Methods in Corrosion Research (EMCR) Hungary, Paper No. 110
Sridhar T M, Kamachi Mudali U, Rajeswari S, Subbaiyan M 2000b Sintering effects on hydroxyapatite coated type 316L stainless steels and their impedance behaviour in Ringer’s solution.Proc. Int. Conf. on Advances in Composites — 2000 (eds) E D Dwarakadasa, K G Krishnadas Nair (Bangalore: FAME) 256–273
Sridhar T M, Kamachi Mudali U, Subbaiyan M 2002a Preparation and characterisation of hydroxyapatite coated 316L stainless steel.Corros. Sci. 45: 237–252
Sridhar T M, Kamachi Mudali U, Subbaiyan M 2002b Electrophoretic deposition of hydroxyapatite coated type 316L stainless steel and its corrosion performance.Corrosion (communicated)
Sridhar T M, Kamachi Mudali U, Subbaiyan M 2002c Sintering treatments on hydroxyapatite coatings — an electrochemical impedance study.Proc. Int. Conf. on Advances in Surface Science and Engineering — INSURE (in press)
Sridhar T M, Kamachi Mudali U, Subbaiyan M 2002d Sintering atmosphere and temperature effects on hydroxyapatite coated type 316L stainless steels.Corros. Sci. (communicated)
Subbaiyan M, Sundararajan T, Rajeswari S, Kamachi Mudali U, Nair K G M, Thampi N S 1996aIn vitro evaluation of corrosion resistance of nitrogen ion implanted titanium in simulated body fluid.Advances in surface engineering (eds) P K Datta (London: Royal Society of Chemistry) pp 26–37
Subbaiyan M, Veerabadran KM, Thampi N S, Krishan K, Kamachi Mudali U, Dayal R K 1996b Pitting corrosion studies on nitrogen ion implanted type 316L SS for biomédical applications.Advances in surface engineering (eds) P K Datta (London: Royal Society of Chemistry) pp 38–7
Sundararajan T 1998In vitro corrosion evaluation and surface characterization of nitrogen ion implantated titanium, Ti6Al4V and Ti-modified stainless steel. Ph D thesis, University of Madras, Chennai
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 1996 Electrochemical and XPS investigations of nitrogen ion implanted Ti6 Al4V alloy.Proc. Discuss. Meeting on Surface Sci. Eng. (SURE 96) (Indian Inst. Met.) pp 234–242
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 1997 Localised corrosion behaviour of argon ion implanted titanium modified type 316L stainless steel for application as orthopaedic implant devices.Corrosion and its control (eds) A S Khanna, M K Totlani, S K Singh (Amsterdam: Elsevier) vol. 2, pp 1121–1127
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 1998a Electrochemical studies on nitrogen ion implanted Ti6Al4V alloy.Anti-Corros. Methods Mater. 45: 162–166
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 1998b Surface characterisation of electrochemically formed passive film of nitrogen ion implanted Ti6Al4V alloy.Mater. Trans. Jpn. Inst. Met. 39: 759–764
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 1999a Effects of nitrogen ion implantation on the localised corrosion behaviour of titanium modified type 316L stainless steel in simulated body fluid.J. Mater. Eng. Perform. 8: 252–260
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 1999bIn vitro corrosion evaluation of nitrogen ion implanted titanium in simulated body fluid.Werkstoffe Korros. 50: 344–349
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 1999c Corrosion behaviour of nitrogen ion implanted titanium modified type 316 stainless steel in comparison with argon and oxygen ion implantations.Mater. Sci. Forum 318-320: 553–560
Sundararajan T, Kamachi Mudali U, Nair K G M, Rajeswari S, Subbaiyan M 2000In vitro corrosion evaluation of nitrogen ion implanted titanium in simulated body fluid.Trans. Indian Inst. Met. 52: 413–421
Symko O G, Park W, Kieda D 2001 Quasicrystal thin films for biomedical applications.Surface modification technologies on CD (ASM International)
Syrett B C, Wing S S 1978 An electrochemical investigation of fretting corrosion of surgical implant materials.Corrosion 11: 379–386
Tanabe H, Kamachi Mudali U, Togashi K, Misawa T 1998In situ pH measurements during localised corrosion of type 316LN stainless steel using scanning electrochemical microscopy.J. Mater. Sci. Lett. 17: 551–553
Thair L, Kamachi Mudali U, Rajagopalan S, Nair K G M, Asokamani R, Baldev Raj 2001 Role of alloying elements on the passive films of nitrogen ion implanted Ti-6Al-4V and Ti-6Al-7Nb alloys.Proc. First Asian-Pacific Conference and 6th National Convention on Corrosion on CD, Nov 28–30
Thair L, Kamachi Mudali U, Bhuvaneswaran N, Nair K G M, Asokamani R 2002 Nitrogen ion implantation andin vitro corrosion behaviour of Ti-6Al-7Nb alloy.Corros. Sci. 44: 2027–2039
TIFAC 1996 V:08:V:ESDR, DST, Material & Processing: Technology Vision 2020, September, New Delhi
Ukai H, Murakami K 2001 Surface characterization of Ca implanted titanium for biomaterials.Surface Modification Technologies on CD (ASM International)
Veerabadran K M 1999Nitrogen ion implantation for improving localized corrosion resistance of surgical grade and advanced type 316L stainless steels for orthopaedic implant devices. Ph D thesis, University of Madras, Chennai
Veerabadran K M, Kamachi Mudali U, Nair K G M, Subbaiyan M 1996 Surface modification of surgical grade stainless steel orthopaedic implants by ion implantation and investigation of localised corrosion.Proc. Discuss. Meeting on Surface Sci. Eng. (SURE 96) (Indian. Inst. Met.) pp 226–233
Veerabadran K M, Kamachi Mudali U, Nair K G M, Subbaiyan M 1999 Improvements in localised corrosion resistance of nitrogen ion implanted type 316L stainless steel orthopaedic implant devices.Mater. Sci. Forum 318-320: 561–568
Von Recum A F 1999 Handbook ofbiomaterials evaluation — Scientific, technical and clinical testing of implant materials 2nd edn (Philadelphia: Taylor & Francis)
Wang M, Deb S, Bonfield W 2000 Chemically coupled hydroxyapatite-polyethylene composites: processing and characterization.Mater. Lett. 44: 119–124
Williams D F 1981 Electrochemical aspects of corrosion in the physiological environment. InFundamental aspects of biocompatibility (ed) D F Willams D F (Boca Raton, FL: CRC press) vol. 1, pp 11–20
Yamada H 1970Strength of biological materials (Baltimore: Williams & Williams)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kamachimudali, U., Sridhar, T.M. & Raj, B. Corrosion of bio implants. Sadhana 28, 601–637 (2003). https://doi.org/10.1007/BF02706450
Issue Date:
DOI: https://doi.org/10.1007/BF02706450