Abstract
Comminution characteristics of diatomaceous earth have been investigated in a vertical type jet mill of pilot plant scale; the diameter of the chamber of mill is 26.3 cm. Fluidization of the particles in the chamber has been proposed to enhance the comminution efficiency of the jet mill by promoting the effective contacting of powders with compressed air as well as the chamber wall. Effects of the pressures or densities of pulverizing-air and fluidizing-air and comminution time on the mean size of the particles and the rate of comminution have been examined. The statistical analysis of pressure fluctuations in the chamber of the mill has been utilized to predict the characteristics of the vertical-type jet mill taking advantage of the fluidization technique. The particle size and comminution rate have been correlated with the operating variables, respectively.
Similar content being viewed by others
References
Alicatore, A. F. and Neu, E. L., “Comparison of Filteraids”,Chem. Eng. Progr.,67, 49 (1971).
Basso, A. J., “Vacuum Filtration Using Filteraids”,Chem. Eng.,89, 159(1982).
Bendat, J. S. and Piersol, A. G., “Engineering Applications of Correlations and Spectral Analysis”, Wiley, N. Y. (1980).
Culver, R. H., “Diatomaceous Earth Filtration”,Chem. Eng. Progr.,71, 51 (1975).
Fan, L. T., Kang, Y., Neogi, D. and Yashima, M., “Fractal Analysis of Fluidized Particle Behavior in Liquid-Solid Fluidized Beds”,AIChE J.,39, 513 (1993).
Hendry, R., “A Mathematical Model for Fluid Energy Mills”, Dechema Monograph, Band 57, Verlag Chemie, 695(1967).
Honma, T., Hasegawa, M. and Kanda, Y., “Jet Pulverizing Using Grinding Medium”,J. Chem. Eng. Japan,15, 240(1982).
Honma, T., Hasegawa, M. and Kanda, Y., “Effects of Feed Particle Shapes an Jet Pulverization”,J. Chem. Eng. Japan,17, 221 (1984).
Ito, H., “Scale-up Theory of Single Track Jet Mill”. Proc. of the 2nd Korea-Japan Powder Technol. Symp., 63(1987).
Kang, Y., Min, B. T., Ko, M. H. and Kim, S. D., “Effects of Bubble Breakers the Pressure Fluctuations in the Continuous Bubble Columns”,Hwahak Konghak,32, 58(1994).
Menyhart, M. and Miskiewicz, L., “Comminution and Structural Changes in a Jet Mill”,Powder Technol,15, 261(1976).
Mori, Y., “Studies an Jet Pulverizing”, Dechema Zerkleinern Symp., 515 (1965).
Ramanujam, M. and Venkateswarlu, D., “Studies in Fluid Energy Grinding”,Powder Technol.,3, 92(1969).
Yoon, S. H., Kang, Y. and Cho, S. H., “Development of Fluidized Bed Energy Mill”, Report to the Ministry of Commerce and Industry, Korea (1989).
Yoon, S. H., Kang, Y. and Cho, S. H., “Scale-up of Fluid Energy Mill in the University”, Proc. 2nd World Congress of Particle Technol., Kyoto, Japan, 401 (1990).
Yoon, S. H., Kang, Y., Cho, S. H. and Kim, S. D., “Diatomite-filteraid Manufacturing Process Improvement by Jet Grinding”, Proc. 6th World Filtration Congress, Nagoya, Japan, 133 (1993).
Yoon, S. H., Kim, S. D., Kang, Y. and Cho, S. H., “Statistical Analysis of Pressure Fluctuations in a Fluidized Bed Energy Mill”, Proc. of 4th Asian Conference on Fluidized Beds and ThreePhase Reactors, 37, Kyushu, Japan (1994).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yoon, S.H., Kim, S.D., Rang, Y. et al. Effective comminution of diatomaceous earth in a vertical type jet mill. Korean J. Chem. Eng. 12, 436–441 (1995). https://doi.org/10.1007/BF02705807
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705807