Skip to main content
Log in

Size-dependent luminescent properties of hollow and dense BaMgAl10O17: Eu blue phosphor particles prepared by spray pyrolysis

  • Published:
Korean Journal of Chemical Engineering Aims and scope Submit manuscript

Abstract

Hollow and dense BaMgAl10O17: Eu2+ (BAM) phosphor particles were synthesized by a spray pyrolysis process and their luminescent properties were investigated under vacuum ultraviolet (VUV) excitation as varying the average particle size. The dependence of the luminescent intensity on the particle size was greatly influenced by the morphology of BAM particles. For the BAM particles with a hollow structure, the luminescent intensity linearly increased with increasing the particle size. However, no significant change in the luminescent intensity was observed for dense particles as the particle size changed. Also, all dense BAM particles had higher photoluminescence intensity than that of the hollow ones regardless of the particle size. The luminescent intensity of BAM phosphor particles prepared by spray pyrolysis was found to have a linear relationship with the crystallite size. Therefore, it was concluded that suppressing the formation of a hollow structure and increasing the crystallite size are needed to obtain high luminous BAM phosphor particles with a spherical shape and fine size of less than 1 Μm. On the basis of penetration depth of VUV, a simple relation equation between the particle size and the luminescent intensity was derived and correlated with experimental results in order to interpret the luminescent behavior of BAM phosphor as the particle size changes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Brinker, C. J. and Scherer, G. W., “Sol-Gel Science” Academic Express (1990).

  • Cho, T. H. and Chang, H. J., “Preparation and Characterization of Zn2SiO4: Mn Green Phosphors,”Ceram. Int.,29, 611 (2003).

    Article  CAS  Google Scholar 

  • Choi, R. J., Lee, H. J., Hahn, Y. B. and Cho, H. K., “Structural and Optical Properties of InGaN/GaN Triangular-shape Quantum Wells with Different Threading Dislocation Densities,”Korean J. Chem. Eng.,21, 292 (2004).

    Article  CAS  Google Scholar 

  • Choi, R. J., Hahn, Y. B., Shim, H.-W., Suh, E.-K., Hong, C. H. and Lee, H. J., “Improvement of Electrical and Optical Properties of InGaN/ GaN-Based Light-Emitting Diodes with Triangular Quantum Well Structure,”Korean J. Chem. Eng.,20, 1134 (2003).

    Article  CAS  Google Scholar 

  • Evans, J. R G., Edirisinghe, M. J., Conveney, P. V. and Eames, J., “Combinatorial Searches of Inorganic Materials Using the Ink-jet Printer: Science, Philosophy and Technology,”J. Eur. Ceram. Soc.,21, 2291 (2001).

    Article  CAS  Google Scholar 

  • He, C., Cuan, Y., Yao, L., Cai, W., Li, X. and Yao, Z., “Synthesis and Photoluminescence of Nano-Y2O3: Eu3+ Phosphors,”Mater. Res. Bull.,38, 973 (2003).

    Article  CAS  Google Scholar 

  • Jung, K. Y. and Park, S. B., “Effect of Calcination Temperature and Addition of Silica, Zirconia, Alumina on the Photocatalytic Activity of Titania,”Korean J. Chem. Eng.,18, 879 (2001).

    Article  CAS  Google Scholar 

  • Kang, H. S., Kang, Y. C., Park, H. D. and Shul, Y.-G., “Green-emitting Yttrium Silicate Phosphor Particles Prepared by Large Scale Ultrasonic Spray Pyrolysis,”Korean J. Chem. Eng.,20, 930 (2003).

    Article  CAS  Google Scholar 

  • Kang, M. J. and Choi, S. Y., “Preparation of Sr2CeO4 Blue Phosphor by Ultrasonic Spray Pyrolysis: Effect of NH4NO3 Addition,”J. Mater. Sci.,37, 2721 (2002).

    Article  CAS  Google Scholar 

  • Kang, Y. C. and Park, S. B., “Zn2SiO4: Mn Phosphor Particles Prepared by Spray Pyrolysis Using a Filter Expansion Aerosol Generator,”Mater. Res. Bull.,35, 1143 (2000).

    Article  CAS  Google Scholar 

  • Kang, Y. C., Roh, H. S. and Park, S. B., “Preparation of Y2O3: Eu Phosphor Particles of Filled Morphology at High Precursor Concentration by Spray Pyrolysis,”Adv. Mater.,12, 451 (2000).

    Article  CAS  Google Scholar 

  • Kang, Y. C. and Park, S. B., “Morphology Control of BaMgAl10O17: Eu Particles: The Use of Colloidal Solution Obtained from Alkoxide Precursor in Spray Pyrolysis”J. Electrochem. Soc.,147, 799 (2000).

    Article  CAS  Google Scholar 

  • Kim, C. H., Kwon, I. E., Park, C. H., Hwang, Y. J., Bae, H. S., Yu, B. Y., Pyun, C. H. and Hong, G. Y., “Phosphors for Plasma Display Panels,”J. Alloy Compd.,311, 33 (2000).

    Article  CAS  Google Scholar 

  • Kim, D. S. and Lee, R. Y., “Synthesis and Photoluminescence Properties of (Y, Gd)BO3: Eu Phosphor Prepared by Ultrasonic Spray,”J. Mater. Sci.,35, 4777 (2000).

    Article  CAS  Google Scholar 

  • Kim, K. H., Park, J. K., Kim, C. H., Park, H. D., Chang, H. and Choi, S. Y., “Synthesis of SrTiO3: Pr, Al by Ultrasonic Spray Pyrolysis,”Ceram. Int.,28, 29 (2002).

    Article  CAS  Google Scholar 

  • Lee, D. Y., Kang, Y. C. and Jung, K. Y., “Effect of Aluminum Polycation Solution on the Morphology and VUV Characteristics of BaMg Al10O17 Blue Phosphor Prepared by Spray Pyrolysis,”Electrochem. Solid St. Lett.,6, H27 (2003).

    Article  CAS  Google Scholar 

  • Lee, D. Y., Kang, Y. C., Park, H. D. and Ryu, S. K., “VUV Characteristics of BaAl12O19: Mn2+ Phosphor Particles Prepared from Aluminum Polycation Solution by Spray Pyrolysis”J. Alloy Compd.,353, 252 (2003).

    Article  CAS  Google Scholar 

  • Lenggoro, I. W., Xia, B., Mizushima, H., Okuyama, K. and Kijima, N., “Synthesis of LaPO4: Ce, Tb Phosphor Particles by Spray Pyrolysis,”Mater. Lett.,50, 92 (2001).

    Article  CAS  Google Scholar 

  • Nahm, K. S., Yang, S. H. and Ahn, S. H., “Structural and Optical Characteristics of Thick GaN Films Grown by the Direct Reaction of Metal Ga and NH3 in CVD Reactor,”Korean J. Chem. Eng.,17, 105 (2000).

    CAS  Google Scholar 

  • Nedeljkovie, J. M., Saponjic, Z. V., Rakocevic, Z., Jakanovic, V. and Uskokovic, D. P., “Ultrasonic Spray Pyrolysis of TiO2 Nanoparticles,”Nanostruct. Mater.,9, 125 (1997).

    Article  Google Scholar 

  • Park, H. G., Park, Y. C., Ha, S. C. and Ryu, J. H., “High-luminous-efficiency Barrier-rib Structure in Color AC PDPs,” SID’00 719 (2000).

  • Roh, H. S., Kang, Y. C., Lee, C. H., Park, H. D. and Park, S. B., “Morphological Control of Zn2SiO4: Mn Phosphor Particles by Adding Citric Acid in Spray Pyrolysis Process,”Jpn. J. Appl. Phys.,42, 3429 (2003).

    Article  CAS  Google Scholar 

  • Yu, Y.-T. and Kim, B.-G., “Effects of Adding B2O3 as a Flux on Phosphorescent Properties in Synthesis of SrAl2O4: (Eu2+, Dy3+) Phosphor,”Korean J. Chem. Eng.,20, 973 (2003).

    Article  CAS  Google Scholar 

  • Zhou, Y. H., Lin, J., Yu, M., Han, S. M., Wang, S. B. and Zhang, H. J., “Morphology Control and Luminescence Properties of YAG: Eu Phosphors Prepared by Spray Pyrolysis,”Mater. Res. Bull.,38, 1289 (2003).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Kyeong Youl Jung.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Jung, K.Y., Lee, D.Y., Kang, Y.C. et al. Size-dependent luminescent properties of hollow and dense BaMgAl10O17: Eu blue phosphor particles prepared by spray pyrolysis. Korean J. Chem. Eng. 21, 1072–1080 (2004). https://doi.org/10.1007/BF02705595

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02705595

Key words

Navigation