Abstract
A new X-ray method for the evaluation of three dimensional (residual) stress states is demonstrated by studies of the effect of grinding on Armco iron and a medium carbon steel. Although the penetration depth of the Cr-radiation employed in this study is only 5 μm, there is evidence of residual stresses normal to the surface (normal and shear components). In the past it has been assumed that these stress components can be neglected. Shear stresses normal to the surface are small in Armco iron, but significant (± 60 MPa) in steel. From the sign of the shears, the direction of final grinding can be determined. Cooling decreases the tensile stresses parallel to the surface in steel; surprisingly, the opposite result is found in Armco iron.
Similar content being viewed by others
References
L. A. Glickman and V. A. Stepanov:J. Technol. Phys. USSR, 1946, vol. 16, pp. 791–802.
J. Frisch and E.G. Thomsen:Trans. ASME, 1951, vol. 73, pp. 337–46.
H. R. Letner:Trans. ASME, 1955, vol. 77, pp. 1089–98.
L. V. Colwell, M. J. Sinnott, and J. C. Tobin:Trans. ASME, 1955, vol. 77, pp. 1099–1105.
E. K. Henriksen:Tool Eng., 1957, vol. 38, pp. 92–96.
D. P. Koistinen and R. E. Marburger:Trans. ASM, 1959, vol. 51, pp. 537–55.
W. P. Koster, M. Field, L. J. Fritz, L. J. Gatto, and J. R. Kahles: Rep. AFML-TR-70-11, U.S. Air Force Materials Laboratory, Metcut Research Assoc, Inc., Cincinnati, OH, 1970.
E. Schreiber:HÄrterei-Tech. Mitt., 1973, vol. 28, pp. 186–200.
P. S. Prevey:Adv. X-ray Anal, 1976, vol. 19, pp. 709–24.
G. Faninger and H. Walburger:HÄrterei-Tech. Mitt., 1976, vol. 31, pp. 79–82.
U. Wolfstieg and E. Macherauch:HÄrterei-Tech. Mitt., 1976, vol. 31, pp. 83–85.
B. Syren, H. Wohlfahrt, and E. Macherauch:Arch. Eisenhüttenwes, 1977, vol. 48, pp. 421–24.
D. F. Stein:Acta Met., 1966, vol. 14, pp. 99–104.
C. J. McMahon:Adv. Mater. Sci. Res., vol. 2, pp. 121–40, Interscience, NY, 1968.
C. W. Maschall and R. E. Marginer:Dimensional Instability, Ch. 6, pp. 139–212, Pergamon-Press, Oxford, NY, 1977.
H. Dölle and V. Hauk:HÄrterei-Tech. Mitt., 1976, vol. 31, pp. 165–68.
H. Dölle:J. Appl. Crystallogr., in print.
C. S. Barrett and T. B. Massalski:Structure of Metals, 3rd ed., McGraw-Hill, NY, 1966.
B. D. Cullity:Elements of X-ray Diffraction, Addison-Wesley, Reading, 1956.
M. R. James and J. B. Cohen:Adv. Mater. Res., Wiley, NY, in press.
B.D. Cullity:J. Appl. Phys., 1964, vol. 35, pp. 1915–17.
B. D. Cullity:Adv. X-ray Anal, 1977, vol. 20, pp. 259–71.
A. Peiter:HÄrterei-Tech. Mitt., 1976, vol. 31, pp. 158–64.
H. Dölle and V. Hauk:Z. Metallkd., 1977, vol. 68, pp. 725–28.
H. Walburger:Conf. on Residual Stress Analysis, Starnberg, Germany, 1973.
E. Macherauch and U. Wolfstieg:J. Mater. Sci. Eng., 1977, vol. 30, pp. 1–13.
E. Christ and H. Krause:Z. Metallkd., 1975, vol. 66, pp. 615–18.
H. Krause and H. H. Jühe:Wear, 1977, vol. 36, pp. 15–21.
P. D. Evenschor and V. Hauk:Z. Metallkd., 1975, vol. 66, pp. 167–68.
H. Dölle and V. Hauk:HÄerterei-Tech. Mitt., in print.
M. R. James and J. B. Cohen:Adv. X-ray Anal, 1971, vol. 20, pp. 291–308.
G. Faninger, V. Hauk, E. Macherauch, and U. Wolfstieg:HÄerterei-Tech. Mitt., 1976, vol. 31, pp. 109–11.
F. Bollenrath, V. Hauk, and E. H. Müller:Z. Metallkd., 1967, vol. 58, pp. 76–82.
K. -H. Hellwege:New Series, Group III: Crystal and Solid State Physics, H. Landolt-Börnstein, ed., vol. 2, pp. 1–3, Springer-Verlag, Berlin-Heidelberg-New York, 1969.
E. Kröner:Z. Phys., 1958, vol. 151, pp. 504–18.
G. Faninger:Acta Phys. Austriaca, 1966, vol. 24, pp. 245–70.
J. B. Cohen, H. Dölle, and M. R. James:International Conference on Powder Diffraction, NBS, in press.
H. Neerfeld:Mitt. Kaiser-Wilhelm-Inst. Eisenforsch. Düsseldorf, 1944, vol. 27, pp. 81–89.
H. Dölle and V. Hauk:Z. Metallkd., 1978, vol. 63, pp. 410–17.
H. Krause and H. H. Jühe:Haerterei-Tech. Mitt., 1976, vol. 31, pp. 168–70.
N. Brown and R. A. Ekvall:Acta Met., 1962, vol. 10, pp. 1101–07.
K. Kolb and E. Macherauch:Arch. Eisenhuettenwes., 1965, vol. 36, pp. 9–27.
F. Bollenrath, V. Hauk, and W. Weidemann:Arch. Eisenhuettenwes., 1967, vol. 38, pp. 793–800.
A. S. Keh and S. Weissmann:Electron Microscopy and Strength of Crystals, G. Thomas and J. Washbum, eds., pp. 231–300, Interscience, NY, 1963.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dölle, H., Cohen, J.B. Residual stresses in ground steels. Metall Trans A 11, 159–164 (1980). https://doi.org/10.1007/BF02700452
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02700452