Abstract
The role of solid carbon in accelerating the Na2SO4-induced corrosion of nickel-base alloys at high temperature has been investigated. Corrosion rates of salt-coated IN 738 alloy in an oxidizing atmosphere containing 0.1 pct SO2 were much increased when the alloy was initially exposed to a low concentration of methane for a short time at 1273 K (1000°C). Crucible tests carried out with Ni-5 Al, Ni-30 Al, Ni-20Cr-15 Al and IN 738 specimens immersed in Na2SO4-carbon mixtures showed that corrosion of these alloys was dramatically enhanced if the carbon persisted long enough to form a Na2S phase by reaction with the Na2SO4. In an oxidizing environment a graphitic carbon had a more pernicious effect on alloy corrosion resistance than a finely dispersed carbon black which burnt away more readily. Corrosion rates in air were also accelerated in the presence of carbonized crude oil residue such as might be formed as a result of incomplete fuel combustion in a gas turbine.
Similar content being viewed by others
ReferencesReferences
J. Stringer:Hot Corrosion in Gas Turbines, Battelle Memorial Institute, MCIC Report 72-08, 1972.
L. W. Haryslak and R. J. Pollini:Hot Corrosion Problems Associated with Gas Turbines, ASTM Spec. Pub. 421, p. 146 (1967).
I. I. Bessen and R. E. Fryxell:Turbine Corrosion and Protection in Marine Environments, Gas Turbine Materials Conf., Hyattsville, Maryland, October 1972.
N. G. Nilsson: Proc. 9th Intern. Congress on Combustion Engines, Stockholm (1971).
E. S. Starkman, A. G. Cattaneo, and S. H. McAllister:Ind. Eng. Chem., 1951, vol. 43, p. 2822.
H. E. Comins: 1st Intern. Congress on Metallic Corrosion, p. 212, Butterworths Scientific Pub., London 1961.
J. A. Goebel, F. S. Pettit, and G. W. Goward:Met. Trans. 1973, vol. 4, p. 261.
A. U. Seybolt: General Electric Research and Development Center Report No. 70-C-189.1970.
J. A. Goebel and F. S. Pettit:Met. Trans. 1970, vol. 1, p. 1943.
S. K. Sharma, F. J. Vastola, and P. L. Walker: 10th Carbon Conf., Bethlehem, Pa., 1971, Paper RS-173.
W. L. Wheatfall, H. Doering, and G. J. Danek, Jr.:Hot Corrosion Problems Associated with Gas Turbines, ASTM Spec. Pub. 421, p. 206,1967.
D. W. McKee, and G. Romeo:Met. Trans. 1973, vol. 4, p. 1877.
D. W. McKee, and G. Romeo:Met. Trans. 1974, vol. 5, p. 1127.
D. W. McKee:Carbon 1970, vol. 8, p. 623.
N. Birks:High Temperature Gas-Metal Reactions in Mixed Environments, Met. Soc. of AIME, 1973, p. 322.
G. Romeo, and H. S. Spacil:ibid. p. 299.
J. M. Thomas:Chemistry and Physics of Carbon, 1965, vol. l, p. 122, Marcel Dekker, New York.
E. M. Freeman, and H. Marsh:Carbon 1970, vol. 8, p. 19.
A. E. Kara, and M. Beer:J. Appl. Phys., 1966, vol. 37, p. 2179.
H. B. Palmer and C. F. Cullis:Chemistry and Physics of Carbon, 1965, vol. 1, p. 271, Marcel Dekker, New York.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
McKee, D.W., Romeo, G. Effects of transient carbon deposition on the sodium sulfate-induced corrosion of nickel-base alloys. Metall Trans A 6, 101–108 (1975). https://doi.org/10.1007/BF02673676
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02673676