References
R. B. Benson, Jr., R. K. Dann, and L. W. Roberts, Jr.:Trans TMS-AIME, 1968, vol. 242, pp. 2199–2205.
A. W. Thompson:Met. Trans., 1973, vol. 4, pp. 2819–25.
M. L. Holzworth and M. R. Louthan, Jr.:Corrosion, 1968, vol. 24, pp. 110–24.
M. B. Whiteman and A. R. Troiano:Corrosion, 1965, vol. 21, pp. 53–56.
M. L. Holzworth:Corrosion, 1969, vol. 25, pp. 107–15.
M. L.Mehta and J. Burke:Corrosion, 1975, vol. 31, pp. 108–10.
R. M. Vennett and G. S. Ansell:Trans. ASM, 1967, vol. 60, pp. 242–51.
J. Papp, R. F. Hehemann, and A. R. Troiano:Hydrogen in Metals, I. M. Bernstein and A. W. Thompson, eds., pp. 657–68, AIME, New York, 1976.
B. C. Odegard, J. A. Brooks, and A. J. West:Effect of Hydrogen on Behavior of Materials, A. W. Thompson and I. M. Bernstein, eds., pp. 116–25,AIME, New York, 1976.
H. J. Saxton, A. J. West, and A. W. Thompson:Effect of Hydrogen on Behavior of Materials, A. W. Thompson and I. M. Bernstein, eds., pp. 631–41, AIME, New York, 1976.
ASTM Standard, 262 Practice E.
J. P. Fidelle, L. R. Allemand, C. Roux, and M. Rapin:L’hydrogene dans les Me’taux, J. P. Fidelle and M. Rapin, eds., pp. 131–72, Centre d’Etudes CEA, Bruye’res-le-Chatel, 1967.
J. P. Fidelle, R. Bemardi, R. Broudeur, C. Roux, and M. Rapin:Hydrogen Embrittlement Testing, pp. 221–53, ASTM-STP 543, ASTM, Philadelphia, 1974.
A. W. Thompson:Mat. Sci. Eng., 1974, vol. 14, pp. 253–64.
R. G. Rowe.C. L. Briant, and F. Bacon:Proc. Microbean Soc., to be published, Boston, 1977.
C. J. McMahon, Jr., C. L. Briant, and S. K. Banerji:Proc. Int. Conf. Frac. IV, D. Taplin, ed., pp. 363–78, Waterloo Press, Waterloo, 1977.
R. M. Latanision and R. W. Staehle:Fundamental Aspects of Stress Corrosion Cracking, pp. 214–96, NACE, Houston, 1969.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Briant, C.L. Hydrogen assisted cracking of sensitized 304 stainless steel. Metall Trans A 9, 731–733 (1978). https://doi.org/10.1007/BF02659931
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02659931