References
Henry Marion Howe:The Metallurgy of Steel, The Scientific Publishing Co., New York, NY, 1891.
Henry Marion Howe:The Metallography of Steel and Cast Iron, McGraw-Hill Book Co., New York, NY, 1916.
M. Gensamer:The Sorby Centennial Symp. on the History of Metallurgy, TMS Conf., R.C. Smith, ed., Gordon and Breach Science Publishers, New York, NY, 1964, vol. 27, pp. 59–66.
H.A. Fine, R.J. Fruehan, D. Janke, and R. Steffen:Steel Res., 1989, vol. 60, pp. 188–90.
T. Kootz:Stahl Eisen, 1959, vol. 79, pp. 135–37.
G. Naeser and W. Schultz:Stahl Eisen, 1959, vol. 79, pp. 137–41.
R.D. Pehlke and J.F. Elliott:Trans. TMS-AIME, 1963, vol. 227, pp. 844–55.
L.S. Darken and E.T. Turkdogan: inHeterogeneous Kinetics at Elevated Temperatures, G.R. Belton and W.L. Worrell, eds., Plenum Press, New York, NY, 1970, pp. 25–95.
G.R. Belton:Metall. Trans. B, 1976, vol. 7B, pp. 35–42.
B. von Szyszkowski:Z. Phys. Chem., 1908, vol. 64, pp. 385–414.
E.H. Lucassen-Reynders:J. Chem. Phys., 1966, vol. 70, pp. 1777–85.
P. Kozakevitch:Surface Phenomena of Metals, Monograph No. 28, The Society of the Chemical Industry, London, 1968, pp. 223–45.
K. Ogino, K. Nogi, and C. Hosoi:Tetsu-to-Hagané, 1983, vol. 69, pp. 1989–94.
V.A. Grigoryan, R.A. Aleev, A.J. Kochetov, and M.I. Pryanishikov:Steel in USSR, 1973, vol. 3, pp. 199–200.
S. Hayakawa, T. Choh, and M. Inouye:Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 637–45.
JANAF Thermochemical Tables,J. Phys. Chem. Ref. Data, 1985, vol. 14, suppl. 1.
Handbook on Properties of Liquid Iron and Slag, Iron and Steel Inst. Jpn., Tokyo, 1972.
G.R. Belton, R.J. Fruehan, and E.T. Turkdogan:Metall. Trans., 1972, vol. 3, pp. 596–98.
D.R. Sain and G.R. Belton:Metall. Trans. B, 1976, vol. 7B, pp. 235–44.
D.R. Sain and G.R. Belton:Metall. Trans. B, 1978, vol. 9B, pp. 403–07.
F.J. Mannion and R.J. Fruehan:Metall. Trans. B, 1989, vol. 20B, pp. 853–61.
G.R. Belton:Metall. Trans. B, 1979, vol. 10B, pp. 118–20.
H. Gaye and P.V. Riboud:Metall. Trans. B, 1977, vol. 8B, pp. 409–15.
E.W. Mulholland, G.S.F. Hazeldean, and M.W. Davies:J. Iron Steel Inst., 1973, vol. 211, pp. 632–39.
M.W. Davies, G.S.F. Hazeldean, and P.N. Smith:Physical Chemistry of Process Metallurgy, The Richardson Conf, J.H.E. Jeffes and R.J. Tait, eds., Institute of Mining and Metallurgy, London, 1974, pp. 95–107.
D.J. Min and R.J. Fruehan:Metall. Trans. B, 1992, vol. 23B, pp. 29–37.
D.R. Sain: Ph.D. Dissertation, University of Pennsylvania, Philadelphia, PA, 1975.
Y. Shigeno, H. Mitsufugi, M. Tokuda, and M. Ohtani:J. Japan Inst. Met., 1983, vol. 47, pp. 933–41.
Y. Sasaki and G.R. Belton:Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. 611–13.
R.J. Fruehan, G.R. Belton, F.J. Mannion, and Y. Sasaki:Metall. Trans. B, 1992, vol. 23B, pp. 45–51.
R.J. Fruehan:Proc. Elliott Symp. on Chemical Process Metallurgy, P.J. Koros and G.R. St. Pierre, eds., ISS-AIME, Warrendale, PA, 1991, pp. 1–10.
N. Frössling:Gerlands Beitr. Geophys., 1938, vol. 52, pp. 170–216.
S.-W. Woo: Ph.D. Thesis, McMaster University, Hamilton, ON, Canada, 1971; B.M.H. Hatim: Ph.D. Thesis, Imperial College, London, 1975.
C. Wagner:Adv. Catal., 1970, vol. 21, pp. 323–81.
A.W. Cramb and G.R. Belton:Metall. Trans. B, 1981, vol. 12B, pp. 699–704.
A.W. Cramb and G.R. Belton:Metall. Trans. B, 1984, vol. 15B, pp. 655–61.
E.S. Tankins, N.A. Gokcen, and G.R. Belton:Trans. AIME, 1964, vol. 230, pp. 820–27.
K. Harashima, S. Mizoguchi, M. Matsuo, and A. Kiyose:ISIJ Int., 1992, vol. 32, pp. 111–19.
T.P. Battle and R.D. Pehlke:Ironmaking and Steelmaking, 1986, vol. 13, pp. 176–89.
S. Ban-ya, F. Ishii, Y. Iguchi, and T. Nagasaka:Metall-Trans. B, 1988, vol. 19B, pp. 233–42.
T. Choh, T. Moritani, and M. Inouye:Trans. Iron Steel Inst. Jpn., 1979, vol. 19, pp. 221–30.
K. Harashima, S. Mizoguchi, H. Kajioka, and K. Sakakura:Tetsu-to-Hagané, 1987, vol. 73, pp. 1559–66.
T. Harada and D. Janke:Steel Res., 1989, vol. 60, pp. 337–42.
A. Kikuchi, S. Taniguchi, T. Tadaki, and S. Maeda:Proc. Symp. Int. Union, Theoretical and Applied Mechanics, Cambridge, United Kingdom, 1982, pp. 79–92.
M. Inouye and T. Choh:Trans. Iron Steel Inst. Jpn., 1968, vol. 8, pp. 134–45.
R.J. Fruehan and L.J. Martonik:Metall. Trans. B, 1980, vol. 11B, pp. 615–21.
P.C. Glaws and R.J. Fruehan:Metall. Trans. B, 1985, vol. 16B, pp. 551–59.
S. Ban-ya, T. Shinohara, H. Tozaki, and T. Fuwa:Tetsu-to-Hagané, 1974, vol. 60, pp. 1443–53.
M. Byrne and G.R. Belton:Metall. Trans. B, 1983, vol. 14B, pp. 441–49.
J.D. Katz and T.B. King:Metall. Trans. B, 1989, vol. 20B, pp. 175–85.
T. Kishida, T. Kurisu, H. Ushiyama, and T. Yajima:Scaninject V, Proc. 5th Int. Conf. Ladle Metallurgy, Part 1, MEFOS Lulea, Sweden, 1989, pp. 577–96.
T. Harada and D. Janke:Proc. 6th Int. Iron and Steel Congress, Iron and Steel Institute of Japan, Tokyo, 1990, vol. I, pp. 334–41.
F. Tsukihashi and R.J. Fruehan:Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 858–65.
R.J. Fruehan and L.J. Martonik:Metall. Trans. B, 1981, vol. 12B, pp. 379–84.
P.C. Glaws and R.J. Fruehan:Metall. Trans. B, 1986, vol. 17B, pp. 317–22.
T. Choh, T. Takebe, and M. Inouye:Tetsu-to-Hagané, 1981, vol. 67, pp. 2665–74.
P.C. Glaws and R.J. Fruehan:Iron Steel Soc. Trans., 1988, vol. 9, pp. 1–4.
A.M. Posner, J.R. Anderson, and A.E. Alexander:J. Colloid Sci., 1952, vol. 7, pp. 623–44.
H.P. Meissner and A.S. Michaels:Ind. Eng. Chem., 1949, vol. 41, pp. 2782–87.
A. Kasama, A. McLean, W.A. Miller, Z. Morita, and M.J. Ward:Can. Metall. Q., 1983, vol. 22, pp. 9–17.
I. Jimbo and A.W. Cramb:Proc. 6th Int. Iron and Steel Congress, Iron Steel Institute of Japan, Tokyo, 1990, vol. 1, pp. 499–504.
G.R. Belton:Can. Metall. Q., 1982, vol. 21, pp. 137–45.
L.A. Guth, G. Luckman, and W.R. Graham:Surf. Sci., 1984, vol. 136, pp. 184–94.
M. McLean and E.D. Hondros:J. Mater. Sci., 1973, vol. 8, pp. 349–51.
C.E. Bower, R. Spieser, and J.P. Hirth:Metall. Trans. A, 1976, vol. 7A, pp. 75–79.
H.J. Grabke:ISIJ Int., 1989, vol. 29, pp. 529–38.
H.J. Grabke and H. Viefhaus:Surf. Sci. Lett., 1981, vol. 112, pp. 779–84.
P. Kozakevitch and G. Urbain:Mem. Sci. Rev. Met., 1961, vol. 58, pp. 517–34.
F.A. Halden and W.D. Kingery:J. Phys. Chem., 1955, vol. 59, pp. 557–59.
Van Tszin-Tan, R.A. Karasev, and A.M. Samarin:Izv. Akad. Nauk SSSR, Met.: Toplivo, 1960, no. 2, pp. 49–52.
B.F. Dyson:Trans. TMS-A1ME, 1963, vol. 277, pp. 1098–1102.
H. Gaye, L.D. Lucas, M. Olette, and P.V. Riboud:Can. Metall. Q., 1984, vol. 23, pp. 179–91.
K. Ogino, S. Hara, T. Miwa, and S. Kimoto:Trans. Iron Steel Inst. Jpn., 1984, vol. 24, pp. 522–31.
E.H. Lucassen-Reynders and M. van den Tempel:Proc. Int. Congress Surface Active Substances 4th, 1964, vol. 2, pp. 779–90.
A. Frumkin:Z. Phys. Chem., 1925, vol. 116, pp. 466–84.
Y. Kishimoto, K. Yamaguchi, T. Sakuraya, and T. Fugii:Tetsu-to-Hagané, 1992, vol. 78, pp. 886–93.
Rights and permissions
About this article
Cite this article
Belton, G.R., Hunt, R.W. How fast can we go? The status of our knowledge of the rates of gas-liquid metal reactions. Metall Trans B 24, 241–258 (1993). https://doi.org/10.1007/BF02659126
Issue Date:
DOI: https://doi.org/10.1007/BF02659126