Abstract
A computer model has been developed for the calculation of the heat exchanged and temperature profiles in a packed bed containing a phase change material. The packed bed is intended as a heat storage unit in which an inert fluid flowing through the bed exchanges heat with an encapsulated spherical shot of the phase change (melting and freezing) material. Examples of predicted bed temperature profiles during heat storage and utilization cycles are given. For A1-12 wt pct Si and Al-30 wt pct Si shot, a sequence of storage and utilization cycles with cyclic cocurrent fluid flow was found to utilize the high latent heat of fusion of the shot efficiently and permit the utilization of the bed as a near isothermal (577°C) heat recuperator.
Similar content being viewed by others
References
F. W. Schmidt and A. J. willmott:Thermal Energy Storage and Regeneration, Hemisphere Publishing Corporation, Washington, 1981, chs. 1 and 12.
R. P. Tye, J. G. Bowine, and A. O. Desjarlis: NASA Report No. NASA-CR-135098, Dynatech Corp., August 1976, available from NTIS.
C. E. Birchenall and A. F. Riechman:Metall. Trans. A, 1980, vol. 11A, pp. 1415–20.
D. Farkas and C. E. Birchenall:Metall. Trans. A, 1985, vol. 16A, pp. 323–28.
D. T. Hawkins and R. Hultgren:ASM Metals Handbook, 8th ed., vol. 8, p. 263.
T. W. E. Schumann:J. Franklin Institute, 1929, vol. 208, pp. 405–16.
M. Riaz:J. Heat Transfer, Trans. ASME, 1977, vol. 99, pp. 489–92.
C. P. Jefferson:AIChE J., 1972, vol. 18, pp. 409–16.
E. B. Baumeister and C. O. Bennet:AIChE J., 1958, vol. 4, pp. 69–74.
R. H. Perry and C. H. Chilton:Chemical Engineers' Handbook, 5th ed., McGraw-Hill Book Company, New York, NY, 1973, Section XVI.
R. Hultgren, P. D. Desai, D. T. Hawkins, M. Gleiser, and D. D. Wagman:Selected Values of Thermodynamics Properties of Binary Alloys, ASM, 1973.
V. Ananthanarayanan, R. Gallo, V. Ravi, W. Thacker, I. Varol, C. Mobley, and R. Rapp: Annual Report of Sub-Contract No. 19X-43394C, prepared for Martin Marietta Energy Systems, Inc., January 15, 1985, p. 37.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ananthanarayanan, V., Sahai, Y., Mobley, C.E. et al. Modeling of fixed bed heat storage units utilizing phase change materials. Metall Trans B 18, 339–346 (1987). https://doi.org/10.1007/BF02656152
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02656152