Abstract
The application of hydrostatic extrusion processing to composite wire fabrication offers several advantages over conventional reduction techniques. These include enhanced uniformity, increased reduction capability, and successful extrusion of normally brittle materials. Specifically, this work involved an experiment to screen the effects of seven extrusion process parameters on the uniformity and density of as-extruded BSCCO-core wire, and the required extrusion pressure. Results suggest the following factors to be potentially significant: 1) back pressure, extrusion ratio, and die angle on core uniformity, 2) packing method, extrusion ratio, silver powder additions, and temperature on density, and 3) extrusion ratio and temperature on extrusion pressure.
Similar content being viewed by others
References
K.H. Sandhage, G.N. Riley and W.L. Carter,JOM 43, 21 (1991).
D.A. Korzekwa, J.F. Bingert, E.J. Podtburg and P. Miles,Appl. Supercond. 2, 261 (1994).
G.E. Box, W.G. Hunterand J.S. Hunter,Statistics for Experimenters, (New York: Wiley-Interscience).
N. Inoue and M. Nishihara,Hydrostatic Extrusion: Theory and Applications, (Essex, England: Elsevier Applied Science).
W.A. Backofen,Deformation Processing, (Reading, MA: Addison Wesley).
P.S. Steif,J. Appl. Metal. 4, 317 (1987). $
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bingert, J.F., Bingham, B.L., Sebring, R.J. et al. Hydrostatic extrusion of BSCCO/Ag composite wire. J. Electron. Mater. 24, 1859–1863 (1995). https://doi.org/10.1007/BF02652998
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02652998