Cited References
H. Fredricksson, “The Transition from Peritectic to Eutectic Reaction in Iron Base Alloys,”Int. Conf. Solidification and Casting, Sheffield Metall. Eng. Assoc, Sheffield, 1977, 25 (1977). (Experimental; #)
A.Z. Menshikov and A.Y. Teplykh, “Magnetic Constitutional Diagram of y-FeNiCr Alloys,”Fiz. Met. Metalloved., 44(6), 1215–1221 (1977) in Russian; TR:Phys. Met. Metallogr., 44(6), 78–84 (1977). (Experimental; #)
B. Uhrenius, “A Compendium of Ternary Iron Base Phase Diagrams,”Hardenability Concepts with Applications to Steel, TMS-AIME, Warrendale, PA, 28–81 (1977). (Review; #)
H. Probst, K.H. Geiger, and E. Munstermann, “Simultaneous Measurement of the Partial Pressures of the Component Metals and their Evaluation in the System Fe-Ni-Cr,”Z. Metallkd., 70(12), 798–801 (1979). (Experimental)
T. Chart, F. Putland, and A. Dinsdale, “Calculated Phase Equilibria for the Cr-Fe-Ni-Si System—I. Ternary Equilibria,”Calphad, 4(1), 27–46 (1980). (Review; #)
PL. Lin, A.D. Pelton, and C.W. Bale, “An Interactive Computer Program for Calculating Ternary Phase Diagrams,”Calphad, 4(1), 47–60 (1980). (Review;*)
Z. Skryjova and J. Vrestal, “Determination of Thermodynamic Activities of Components in the Section XCr = 0.215 of the γ Solid Solution Cr-Fe-Ni at 1500K,”Kovove Mater., 18(2), 145–153 (1980) in Czech. (Experimental)
V.l. Gomankov and N.I. Nogin, “Concentration-Dependent Structural Transformation Ni3Fe √ Ni2Cr in the Ternary Ni-Fe-Cr System,”Fiz. Met. Metalloved., 52(3), 665–667 (1981) in Russian; TR:Phys. Met. Metallogr., 52(3), 192–195 (1981). (Experimental; #)
J.L. Kyung, “Computer Calculation of Ternary Phase Diagrams,”J. Korean Inst. Met., 79(10), 906–914 (1981) in Korean. (Review; #)
T. Nishizawa and M. Hasebe, “Computer Calculation of Phase Diagrams of Iron Alloys, (I),”Tetsu-to-Hagane, 67(11), 1887–1898 (1981) in Japanese. (Review; #)
J. Velisek and J. Vrestal, “Correlation of the Thermodynamics and Phase Data in the System Fe-Cr-Ni,”Kovove Mater., 20(6), 645–657 (1982). (Review; #)
S.K. Lee and D.N. Lee, “Computer Calculation of Ternary Phase Diagrams,”Taehan Kumsok Hakhoe Chi, 21(4), 371–379 (1983) in Korean. (Review; #)
R. Mundt and H. Hoffmeister, ‘δ-γ Phase Equilibria in Fe-Rich Fe-Cr-Ni Alloys at Temperatures between 1200 and 1350 °C,”Arch. Eisenhuttenwes.,54(6), 253–256 (1983). (Experimental;#)
J. Tousek, “Thermodynamic Properties of the Fe-Ni-Cr System,”Kovove Mater.,21(3),252–256(1983)in Czech. (Experimental)
J. Vrestal and A. Rek, “Determination of Thermodynamic Activities of Components in the Sections xCr = 0.11 andxCr = 0.33 of the γ-Solid Solution Cr-Fe-Ni at 1500 K,”Kovove Mater., 21(2), 97–104 (1983) in Czech; TR:Met. Mater, 21(2), 67–71 (1983). (Experimental)
I. Ansara, T.G. Chart, P. Y. Chevalier, K. Hack, G. McHugh, M.H. Rand, and P. J. Spencer, “Phase Diagrams for Fe-Cr-Ni Based Alloys: Part 1. Phase Diagrams for Binary and Ternary Alloys of Fe, Cr and Ni with C and with Si,”Rept. Comm. Eur. Communities, EUR 9657/I/EN, 130(1985). (Review;#)
S. Hertzman and B. Sundman, “ AThermodynamic Analysis of the Fe-Cr-Ni System,”Scand. J. Metall., 14(2), 94–102 (1985). (Review; #)
Y.Y. Chuang and Y.A. Chang, “AThermodynamic Model for the Ternary σPhase”Scr.Metall.,20(8), 1115–1118 (1986). (Review)
H. Ezaki, M. Morinaga, N. Yukawa, and H. actachi, “Prediction of the Occurrence of the σ Phase in Fe-Cr-Ni Alloys,”Philos. Mag. A, 53(5), 709–716 (1986). (Review; #)
V.l. Gomankov, B.N. Tretyakov, and V.l. Kleinerman, “Low Temperature Phase Diagrams of the Magnetic States of Fe-Ni-Cr Alloys,”lzv.Akad.Nauk SSSR.Met., (2), 187–192 (1986) inRussian;TR:Russ. Metall., (2), 191–197 (1986). (Experimental)
Y.Y Chuang and Y.A. Chang, “AThermodynamic Analysis and Calculation of the Fe-Ni-Cr Phase Diagram,”Metall. Trans. A, 18(5), 733–745 (1987). (Review; #)
J.W. Elemer, “Thermodynamically Calculated Isothermal Sections of the Fe-Ni-Cr Ternary System for Temperatures Above 1023 K,” Rept. UCID-20838, NTIS, Springfield, 39 (1987). (Review; #)
A. Yamada, T. Umeda, M. Suzuki, G. Aragane, H. Kihara, and Y. Kimura, “Determination of Liquidus and Solidus Surfaces at Fe-rich Region of the Fe-Cr-Ni System,”Tetsu-to-Hagane, 75(14), 1676–1683 (1987) in Japanese. (Experimental; #)
D.M. Kundrat and J.F. Elliott, “Phase Relationships in the Fe-Cr-Ni System at Solidification Temperatures,”Metall. Trans. A, 19(4), 899–908 (1988). (Experimental; #)
G.V. Raynor and V.G. Rivlin, “Cr-Fe-Ni,”Phase Equilibria in Iron Ternary Alloys, Institute of Metals, London, 316–332 (1988). (Review; #)
Y.A. Chang, “Magnetic-Induced Tricritical Point in Alloys and Low Temperature Fe-Ni and Fe-Ni-Cr Phase Diagrams,”Bull. Alloy Phase Diagrams, 10(5),5l3–52l (1989). (Review;#)
K.C. Hari Kumar and V. Raghavan, “BCC-FCC Equilibrium in Ternary Iron Alloys—IV,” /.Alloy Phase Diagrams, 6(1), 31–49 (1990). (Review;#)
M. Hillert and C. Qiu, “AReassessment of the Cr-Fe-Ni System,”Metall.Trans.A,21(6), 1673–1680(1990). (Review;#)
A. Yamada, T. Umeda, and Y. Kimura, “Calculation of Liquidus and Solidus Surfaces of Fe-Rich Corner of Fe-Cr-Ni System,”Tetsu-to-Hagane, 76(12), 2137–2143 (1990) in Japanese. (Review; #)
E.P. Kalinushkin, “Three-Phase Solidification of Fe-Cr-Ni Alloys,”Izv. Akad.Nauk SSSR.Met., (1), 222–226(1992) inRussian; TR:Russ. Metall., (1), 196–199 (1992). (Experimental)
B.J. Lee, “AThermodynamic Evaluation of the Cr-Fe-Ni System,”Taehan Kumsok Hakhoechi, 31(4), 480–489 (1993) in Korean. (Review;#)
J. Sopousek and J. Vrestal, “Phase Equilibria in the Fe-Cr-Ni and Fe-Cr-C Systems,”Z.Metallkd.,85(2), 111–115 (1994). (Experimental;#)
Rights and permissions
About this article
Cite this article
Raghavan, V. Cr-Fe-Ni (chromium-iron-nickel). JPE 15, 534–538 (1994). https://doi.org/10.1007/BF02649411
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02649411