Abstract
This paper examines the diffusional transformations of austenite and concludes that separateC-curves are required for pearlite, upper bainite, lower bainite and isothermal martensite. A schematic isothermal transformation diagram incorporating the four curves is presented for a plain carbon eutectoid steel and used to develop a schematic continuous cooling transformation diagram. These diagrams are shown to be more compatible with the available experimental information than are the usual diagrams based on a single transformation curve.
Similar content being viewed by others
References
E. S. Davenport and E. C. Bain:Trans. AIME, 1930, vol. 90, p. 117.
M. Cohen:Trans. ASM, 1940, vol. 28, p. 537.
Isothermal Transformation Diagrams, 3rd ed., U.S. Steel, Pittsburgh, 1963.
N. F. Kennon:J. Aust. Inst. Metals, 1973, vol. 18, p. 57.
E. C. Bain:Trans. Amer. Soc. Steel Treating, 1932, vol. 20, p. 385.
R. A. Grange and J. M. Kiefer:Trans. ASM, 1941, vol. 29, p. 85.
H. Udin, E. R. Funk, and J. Wulff:Welding for Engineers, p. 248, Wiley, New York, 1954.
A. G. Guy:Elements of Physical Metallurgy, 2nd ed., p. 477, Addison-Wesley, London, 1960.
R. E. Reed-Hill:Physical Metallurgy Principles, p. 478, Van Nostrand Reinhold, London, 1964.
P. L. Mangonon, T. G. Oakwood, and J. M. Shapiro:Metals Handbook, 8th ed., vol. 8, p. 188, ASM, Ohio, 1973.
W. Hume-Rothery:The Structure of Alloys of Iron, p. 241, Pergamon Press, London, 1966.
D. S. Clark and W. R. Varney:Physical Metallurgy for Engineers, 2nd ed., p. 145, Van Nostrand Reinhold, New York, 1969.
R. F. Hehemann:Metals Handbook, 8th ed., vol. 8, p. 194, ASM, Ohio, 1973.
S. V. Radcliffe and E. C. Rollason:J. Iron Steel Inst, 1959, vol. 191, p. 56.
C. E. Birchenall:Physical Metallurgy, p. 292, McGraw-Hill, New York, 1959.
G. A. Chadwick:Metallography of Phase Transformations, p. 253, Butter- worth, London, 1972.
H. I. Aaronson:Mechanism of Phase Transformations in Crystalline Solids, p. 270, Inst. of Metals, London, 1969.
M. Hillert:Decomposition of Austenite by Diffusional Processes, V. F. Zackay and H. I. Aaronson, eds., p. 197, Interscience, New York, 1962.
T. G. Nilan:Trans. TMS-AIME, 1967, vol. 239, p. 898.
N. F. Kennon:J. Aust. Inst. Metals, 1974, vol. 19, p. 3.
C. S. Smith:Trans. ASM, 1953, vol. 45, p. 533.
R. F. Mehl and D. W. Smith:Trans. AIME, 1935, vol. 116, p. 330.
G. V. Smith and R. F. Mehl:, 1942, vol. 150, p. 211.
A. J. Baker, P. M. Kelly, and J. Nutting:Electron Microscopy and Strength of Crystals, G. Thomas and J. Washbum, eds., p. 899, Interscience, New York, 1962.
L. S. Darken and R. M. Fisher:Decomposition of Austenite by Diffusional Processes, V. F. Zackey and H. I. Aaronson, eds., p. 249, Interscience, New York, 1962.
G. V. Kurdjumow and G. Sachs:Z. Physik, 1930, vol. 64, p. 325.
Z. Nishiyama:Sci. Rep. Tohoku Univ., 1934, vol. 23, p. 638.
N. F. Kennon: M.Sc. Thesis, University of New South Wales, 1959.
V J. Pitsch:ActaMet., 1962, vol. 10, p. 897.
D. N. Shackleton and P. M. Kelly:Iron Steel Inst, Special Report No. 93, p. 126, 1965.
R. I. Entin:Decomposition of Austenite by Diffusional Processes, V. F. Zackay and H. I. Aaronson, eds., p. 295, Interscience, New York, 1962.
R. F. Hehemann and S. J. Matos:Trans. TMS-AIME, 1961, vol. 221, p. 179.
R. Le Houillier, G. Begin, and A. Dubé:Met. Trans., 1971, vol. 2, p. 2645.
K. R. Kinsman and H. I. Aaronson:Transformation and Hardenability in Steels, p. 33, Climax Molybdenum Co. of Michigan, Inc., Michigan, 1967.
J. M. Oblak and R. F. Hehemann:, p. 15.
R. F. Hehemann and A. R. Troiano:Met. Prog., 1956, vol. 70, p. 97.
L. Van Vlack:Materials Science for Engineers, p. 429, Addison Wesley, Mass., 1970.
K. J. Pascoe:An Introduction to the Properties of Engineering Materials, p. 216, Blackie, London, 1961.
B. Harocopos:Principles of Structural Metallurgy, p. 87, Iliffe, London, 1963.
P. W. Brown and D. Mack:Met. Trans., 1973, vol. 4, p. 2639.
P. W. Brown and D. Mack:, 1973, vol. 4, p. 2850.
R. F. Hehemann:Phase Transformations, p. 397, ASM, Ohio, 1968.
F. B. Pickering and B. R. Clark:Iron Steel Inst., Special Report 93,1965, p. 143.
D. N. Shackleton:Ibid, p. 146.
J. S. Bowles and N. F. Kennon:J. Aust. Inst. Metals, 1960, vol. 5, p. 106.
R. H. Goodenow, R. H. Barkalow, and R. F. Hehemann:Iron Steel Inst, Special Report 93, 1965, p. 135.
E. Tekin and P. M. Kelly:AIME Met. Soc. Conf, vol. 28, p. 173, Cleveland, 1963.
R. F. Hehemann, K. R. Kinsman, and H. I. Aaronson:Met. Trans., 1972, vol. 3, p. 1077.
G. R. Srinivasan and C. M. Wayman:ActaMet., 1968, vol. 16, p. 621.
M. J. Hawkins and J. Barford:J. Iron Steel Inst., 1972, vol. 210, p. 97.
J. Barford:, 1966, vol. 204, p. 609.
P. Vasudevan, L. W. Graham, and H. J. Axon:, 1958, vol. 190, p. 386.
J. S. White and W. S. Owen:, 1961, vol. 197, p. 241.
F. C. Jepson and M. D. Thompson:, 1949, vol. 162, p. 49.
R. H. Edwards and N. F. Kennon:J Aust. Inst. Metals, 1974, vol. 19, p. 45.
J. Barford:J. Iron Steel Inst., 1962, vol. 200, p. 555.
A. Omsén:, 1971, vol. 209, p. 131.
G. K. Manning and C. H. Lorig:Trans. AIME, 1946, vol. 167, p. 442.
T. G. Nilan:Transformation and Hardenability in Steels, p. 57, Climax Molybdenum Co. of Michigan, Inc., Michigan, 1967.
A. Brownrigg:J. Aust. Inst. Metals, 1974, vol. 19, p. 211.
R. F. Mehl:Hardenability of Alloy Steels, p. 41, ASM, Cleveland, 1939.
A. B. Greninger and A. R. Troiano:Trans. AIME, 1940, vol. 140, p. 307.
J. R. Vilella:, 1940, vol. 140, p. 332.
G. R. Speich and M. Cohen:Trans. TMS-AIME, 1960, vol. 218, p. 1050.
L. J. Habraken and M. Economopoulos:Transformation and Hardenability in Steels, p. 69, Climax Molybdenum Co. of Michigan, Inc., Michigan, 1967.
L. J. Habraken:Iron Steellnst, Special Report 93, 1965, p. 148.
K. A. Ridan and J. McCann:Ibid, p. 147.
M. E. Bush and P. M.Kelly:ActaMet., 1971, vol. 19, p. 1363.
R.T. Howard and M. Cohen:Trans. AIME, 1949, vol. 176, p. 384.
W. Steven and A. G. Haynes:J. Iron Steellnst., 1956, vol. 183, p. 349.
M. F. Smith, G. R. Speich, and M. Cohen:Trans. TMS-AIME, 1959, vol. 215, p. 528.
N. F. Kennon and R. H. Edwards:J. Aust. Inst. Metals, 1970, vol. 15, p. 195.
R. H. Edwards and N. F. Kennon:, 1970, vol. 15, p. 201.
R. E. Cech and J. H. Hollomon:Trans. AIME, 1953, vol. 197, p. 685.
W. I. Pumphrey and F. W. Jones:J. Iron Steellnst., 1948, vol. 159, p. 137.
T. M. Miller and N. F. Kennon:J. Aust. Inst. Metals, 1974, vol. 19, p. 42.
A. Rose and H. P. Hougardy:Transformation and Hardenability in Steels, p. 155, Climax Molybdenum Co. of Michigan, Inc., Michigan, 1967.
C. F. zur Lippe and J. D. Grozier:Met. Prog, 1969, vol. 95, p. 88.
C. F. zur Lippe and J. D. Grozier:, 1970, vol. 97, p. 94.
S. G. Glover and T. B. Smith:The Mechanism of Phase Transformations in Metals, p. 265, Inst. of Metals, London, 1955.
T. Ko and B. Edmondson:Acta Met., 1953, vol. l, p.466.
M. Cohen, E. S. Machlin, and V. G. Paranjpe:Thermodynamics in Physical Metallurgy, p. 242, ASM, Cleveland, 1950.
M. Cohen:Trans. ASM, 1949, vol. 41, p. 35.
A. Brownrigg:J. Aust. Inst. Metals, 1973, vol. 18, p. 189.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kennon, N.F. Schematic transformation diagrams for steel. Metall Trans A 9, 57–66 (1978). https://doi.org/10.1007/BF02647171
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02647171