Abstract
Thin thermal barrier coatings (TBCs) for protecting aircraft turbine section airfoils are examined. The discussion focuses on those advances that led first to TBC use for component life extension and more re-cently as an integral part of airfoil design. Development has been driven by laboratory rig and furnace testing, corroborated by engine testing and engine field experience. The technology has also been sup-ported by performance modeling to demonstrate benefits and life modeling for mission analysis. Factors that have led to the selection of current state-of-the-art plasma-sprayed and physical-vapor-deposited zirconia-yttria/MCrAlX TBCs are emphasized, as are observations fundamentally related to their behav-ior. Current directions in research into TBCs and recent progress at NASA are also noted.
Similar content being viewed by others
References
C.T. Sims, Non-Metallic Materials for Gas Turbine Engines—Are They Real?,Adv. Mater. Process., Vol 139, 1991, p 32–39
W.N. Harrison, D.G. Moore, and J.C. Richmond, “Review of an Inves- tigation of Ceramic Coatings for Metallic Turbine Parts and Other High Temperature Applications,” NACA TN-1186, National Advisory Com- mittee for Aeronautics, 1947
F.G. Garrett and C.A. Gyorgak, “Adhesive and Protective Charac- teristics of Ceramic Coating A-417 and Its Effects on Engine Life of Forged Refractory-26 (AMS 5760) and Cast Stellite (AMS 5385) Tur- bine Blades,” NACA RM-E52130, 1953
N.I. Cannistraro, Where Do We Stand in Ceramic Coatings?,Met. Prog., Vol 74, 1958, p 111–113
N.N. Ault, Characteristics of Refractory Oxide Coatings Produced by Flame Spraying,J. Amer. Ceram. Soc., Vol 40, 1957, p 69–74
W.M. Wheildon, Jr., Oxide Coated Metal Articles with Metal Under- coating, U.S. Patent 3, 006, 782, Oct 1961.
A.V. Levy, Ceramic Coating for Insulation,Met. Prog., Vol 75, 1959, p 86–89
L.N. Hjelm and B.R. Bornhorst, “Research-Airplane-Committee Re- port on Conference on the Progress of the X-15 Project,” NASATM X-57072, National Aeronautics and Space Administration, 1961, p 227- 253
H. Davies, The Design and Development of the Thiokol XRL99 Rocket Engine for the X-15 Aircraft,J. R. Aeronaut. Soc., Vol 67, 1963, p 79- 91
S.G. Grisaffe, Simplified Guide to Thermal-Spray Coatings,Mach. Des., Vol 39, 1967, p 174–181
P.R. Dennis, O.W. Gates, C.R Smith, and J.B. Bond, “Technological Survey—Plasma Jet Technology,” NASA SP-5033, National Aeronau- tics and Space Administration, 1965, p 117–120
H.S. Ingham and A.P. Shepard,Metco Flame Spray Handbook, Vol II,Powder Processes, 2nd ed., Metco Inc., 1964
A.N. Curren, S.G. Grisaffe, and K.C. Wycoff, “Hydrogen Plasma Tests of Some Insulating Coating Systems for the Nuclear Rocket Thrust Chamber,” NASA TM X-2461, National Aeronautics and Space Ad- ministration, 1972
G.W. Goward, Seventeen Years of Thermal Barrier Coatings,Proc. 1987 Coatings for Advanced Heat Engines Workshop, 27–30 July 1987, U.S. Department of Energy, CONF-870762, p III-1 to III-9
K.E. Wilkes and J.F. Lagedrost, “Thermophysical Properties of Plasma Sprayed Coatings,” NASA CR-121144, National Aeronautics and Space Administration, 1973
J. Humink, Jr.,High Temperature Inorganic Coatings, Reinhold, 1963, p 14-15
R. McPherson, The Relationship Between the Mechanism of Forma- tion, Microstructure and Properties of Plasma-Sprayed Coatings,Thin Solid Films, Vol 83, 1981, p 807–811
D. Chuanian, R.A. Zatorski, and H. Herman, Oxide Powders for Plasma Spraying—The Relationship Between Powder Characteristics and Coating Properties,Thin Solid Films, Vol 118, 1984, p 467–475
V.S. Stubican, Phase Equilibria and Metastabilities in the Systems ZrO2-MgO, ZrO2-CaO, and ZrO2-Y2O3,Adv. Ceram., Vol 24A, 1984, p71–85
F.C. Toriz, A.B. Thakker, and S.K. Gupta, “Thermal Barrier Coating for Jet Engines,” ASME 88-GT-279, National Aeronautics and Space Ad- ministration, 1988
S.Stecura, “Two-Layer Thermal Barrier Coating for Turbine Airfoils— Furnace and Burner Rig Test Results,” NASA TM X-3425, National Aeronautics and Space Administration, 1976
S. Stecura and G.H. Liebert, Thermal Barrier Coating System, U.S. Pat- ent 4,055,705, Oct 1977
S. Stecura, “Two Layer Thermal Barrier Coating for High Temperature Components,”Am. Ceram. Soc. Bull., Vol 56, 1977, p 1082–1085
C.H. Liebert et al., “Durability of Zirconia Thermal-Barrier Ceramic Coatings on Air-Cooled Turbine Blades in Cyclic Jet Engine Opera-tion,” NASATM X-3410, National Aeronautics and Space Administra- tion, 1976
J.T. DeMasi-Marcin, K.D. Sheffler, and S. Bose, “Mechanisms of Deg- radation and Failure in a Plasma Deposited Thermal Barrier Coating,” ASME 89-GT-132, National Aeronautics and Space Administration, 1989
R.J. Bratton, S.K. Lau, and S.Y. Lee, “Evaluation of Present Thermal Barrier Coatings for Potential Service in Electric Utility Gas Turbines,” NASA CR-165545, National Aeronautics and Space Administration, 1982
S.R. Levine and R.A. Miller, “Thermal Barrier Coatings for Utility Gas Turbines,” NASA TM-85349, National Aeronautics and Space Admini- stration, 1982
R.C. Tucker, T.A. Taylor, and M.H. Weatherly, “Plasma Deposited Ni- CrAlY Airfoil and Zirconia/NiCrAlY Thermal Barrier Coatings,” pre- sented at the Third Conference on Gas Turbine Materials in a Marine Environment Bath University, Bath, England, 20–23 Sept, 1976, ses- sion VII, paper 2
S. Stecura, “Effects of Compositional Changes on the Performance of a Thermal Barrier Coating System,” NASA TM-78976, National Aero-nautics and Space Administration, 1978
P. Boch et al., Plasma-Sprayed Zirconia Coatings,Adv. Ceram., Vol 12, 1984, p 488–502
E.C. Duderstadt and P. Agarwal, “Energy Efficient Engine. High Pres- sure Turbine Thermal Barrier Coating Support Technology Report,” NASA CR-168037, National Aeronautics and Space Administration, 1983
I.E. Sumner and D.L. Ruckle, “Development of Improved Durability Plasma Sprayed Ceramic Coatings for Gas Turbine Engines,” AIAA 80-1193, AIAA, 1980
P.A. Siemens and W.B. Hillig, “Thermal-Barrier-Coated Turbine Blade Study,” NASA CR-165351, National Aeronautics and Space Admini-stration, 1981
N.P. Anderson and K.D. Sheffler, “Development of Strain Tolerant Thermal Barrier Coating Systems, Tasks I-III,” NASA CR-168251, Na-tional Aeronautics and Space Administration, 1983
T.A. Taylor, D.L. Appleby, A.E. Weatherill, and J. Griffiths, Plasma- Sprayed Yttria-Stabilized Zirconia Coatings: Structure-Property Rela- tionships,Surf. Coat. Technol., Vol 43/44, 1990, p 470–480
D.S. Duvall, Processing Technology for Advanced Metallic and Ce- ramic Turbine Airfoil Coatings,Proc. 2nd Conf. Advanced Materials for Alternative-Fuel-Capable Heat Engines, 24–28 Aug 1981, EPRI RD-2369-SR, Electric Power Research Institute, p 6-102 to 6-117
S.M. Meier, D.M. Nissley, and K.D. Sheffler, Status of Ceramic Ther- mal Barrier Coatings—Gas Turbine Applications and Life Prediction,Proc. 1990 Coatings for Advanced Heat Engines Workshop, 6–9 Aug 1990, U.S. Department of Energy, CONF-9008151, p 11–57 to II–65
T.E. Strangman, Development and Performance of Physical Vapor Deposition Thermal Barrier Coating Systems,Proc. 1987 Coatings for Advanced Heat Engines Workshop, 27–30 July 1987, U.S. Depart- ment of Energy, CONF-870762, p III-63 to III-71
R.E. Demaray, W.K. Halnan, and S. Shen, Development of Electron Beam Physical Vapor Deposition of Ceramic Coatings,Proc. 2nd Conf. Advanced Materials for Alternative-Fuel-Capable Heat En- gines, 24–28 Aug 1981, EPRI RD-2369-SR, Electric Power Research Institute, p6-151 to 6-184
R. Shankar, Electron-Beam Physical Vapor Deposition Development of Zirconia Coatings (abstract only),Proc. 1987 Coatings for Advanced Heat Engines Workshop, 27–30 July 1987, U.S. Department of En- ergy, CONF-870762, p III-43
H. Lammermann and G. Kienel, PVD Coatings for Aircraft Turbine Blades,Adv. Mater. Process, Vol 140 (No. 6), 1991, p 18–23
S.M. Meier, D.M. Nissely, and K.D. Sheffler, “Thermal Barrier Coating Life Prediction Model Development, Phase II—Final Report,” NASA CR-189111, National Aeronautics and Space Administration, 1991
R.A. Miller and C.E. Lowell, Failure Mechanisms of Thermal Barrier Coatings Exposed to Elevated Temperatures,Thin Solid Films, Vol 95, 1982, p 265–273
R.A. Miller, Oxidation-Based Model for Thermal Barrier Coating Life,J. Am. Ceram. Soc., Vol 67, 1984, p 517–521
R.A. Miller, Life Modeling of Thermal Barrier Coatings for Aircraft Gas Turbine Engines,J. Eng. Gas Turbines Power (Trans. ASME), Vol 3, 1989, p 301–305
G.C. Chang, W. Phucharoen, and R.A. Miller, Behavior of Thermal Barrier Coatings for Advanced Gas Turbine Blades,Surf. Coat. Tech- nol., Vol 30, 1987), p 13–28
J.T. Demasi, K.D. Sheffler, and M. Ortiz, “Thermal Barrier Coating Life Prediction Model Development, Phase I—Final Report,” NASA CR-182230, National Aeronautics and Space Administration, 1989
T.A. Cruse, S.E. Stewart, and M. Ortiz, Thermal Barrier Coating Life Prediction Model Development,J. Eng. Gas Turbines Power, Vol 110, 1988, p 610–616
R.V. Hillery, B.H. Pilsner, R.L. McKnight, T.S. Cook, and M.S. Hartle, “Thermal Barrier Coating life Prediction Model Development, Final Report,” NASA CR-180807, National Aeronautics and Space Admini- stration, 1988
T.E. Strangman, J. Neumann, and A. Liu, “Thermal Barrier Coating Life-Prediction Model Development,” NASA CR-179648, National Aeronautics and Space Administration, 1987
C.H. Liebert and F.S. Stepka, “Potential Use of Ceramic Coating as a Thermal Insulation on Cooled Turbine Hardware,” NASA TM X-3352, National Aeronautics and Space Administration, 1976
D.E. Andress, “An Analytical Study of Thermal Barrier Coated First- Stage Blades in an F100 Engine,” NASA CR-135359, National Aero-nautics and Space Administration, 1978
P.L. Meitner, “Analysis of Metal Temperature and Coolant Flow with a Thermal Barrier Coating on a Full-Coverage-Film-Cooled Turbine Vane,” NASA TP-1310, National Aeronautics and Space Administra- tion, 1978
H.J. Gladden and C.H. Liebert, “Effects of a Ceramic Coating on a Met- al Temperatures of an Air-Cooled Turbine Vane,” NASA TP-1598, Na- tional Aeronautics and Space Administration, 1980
R.A. Miller,R.G. Garlick, and J.L. Smialek, Phase Stability in Plasma-Sprayed Zirconia-Yttria,Am. Ceram. Soc. Bull., Vol 62, 1983, p 1355–1358
R.A. Miller and W.J. Brindley, “Thermal Properties of Thermal Barrier Coatings,” NASA TM-105923, National Aeronautics and Space Ad-ministration, 1991
C.C. Berndt et al., Current Problems in Plasma Spray Processing,J. Therm. Spray Technol, Vol 1, 1992, p 341–356
R.A. Miller and J. Doychak, Plasma Sprayed Ceramic Thermal Barrier Coatings for Smooth Intermetallic Alloys,J. Therm. Spray Technol., Vol 1, 1992, p 211–213
K.N. Lee, R.A. Miller, and N.S. Jacobson, Development of Thermal Shock Resistant Mullite Coating on Silicon Carbide,Ceramic Trans- actions: Advances in Ceramic Matrix Composites, N.P. Bansal, Ed., American Ceramic Society, 1994, p 565–575
K.N. Lee, N.S. Jacobson, and R.A. Miller, Refractory Oxide Coatings on Silicon-Based Ceramics,MRS Bull., Vol XIX, 1994, p 35–38
S. Stecura, “Advanced Thermal Barrier System Bond Coatings for Use on Ni-, Co-, and Fe-Base Alloy Substrates,” NASA TM-87062, Na-tional Aeronautics and Space Administration, 1985
W.J. Brindley and R.A. Miller, Thermal Barrier Coating Life and Iso- thermal Oxidation of Low-Pressure Plasma-Sprayed Bond Coat Al- loys,Surf. Coat. Technol., Vol 43/44, 1990, p 446–457
C.E. Lowell, R.G. Garlick, and B. Henry, Thermal Expansion in the Ni- Cr-Al and Co-Cr-Al Systems to 1200 °C Determined by High-Tem- perature X-Ray Diffraction,Metall. Trans., Vol 7A, 1976, p 655–660
W.J. Brindley and J.D. Whittenberger, Stress Relaxation of Low Pres- sure Plasma-Sprayed NiCrAlY Alloys.Mater. Sci. Eng., Vol A163, 1993, p 33–41
D.J. Wortman, E.C. Duderstadt, and W.A. Nelson, “Bond Coat Devel- opment for Thermal Barrier Coatings,” ASME 89-GT-134, American Society of Mechanical Engineers, 1989
S. Stecura, New ZrO2-Yb2O3 Plasma-Sprayed Coatings for Thermal Barrier Applications,Thin Solid Films, Vol 150, 1987, p 15–40
V.S. Stubican, G.S. Corman, J.R. Hellmann, and G. Senft, Phase Rela- tionships in Some ZrO2 Systems,Adv. Ceram., Vol 12, 1984, p96–106
R.A. Miller, W.J. Brindley, J.G. Goedjen, R. Tiwari, and D. Mess, The Effect of Silica on the Cyclic Life of a Zirconia-Yttria Thermal Barrier Coating,Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Ed., ASM International, 1994, p 49–54
R.A. Miller and G.W. Leissler, “Characterization and Durability Test- ing of Plasma-Sprayed Zirconia-Yttria and Hafnia- Yttria Thermal Bar-rier Coatings, Part II. Effect of Spray Parameters on the Performance of Several Hafnia-Yttria and Zirconia-Yttria Coatings,” NASA TP-3296, National Aeronautics and Space Administration, 1993
R.A. Miller, W.J. Brindley, C.J. Rouge, and G.W. Leissler, “Metal/Ce- ramic Bond Coatings for High Temperatures,” NASA Tech Brief 12, National Aeronautics and Space Administration, 1988, p 51
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Miller, R.A. Thermal barrier coatings for aircraft engines: history and directions. JTST 6, 35–42 (1997). https://doi.org/10.1007/BF02646310
Issue Date:
DOI: https://doi.org/10.1007/BF02646310