Summary
Transplanting is a necessary operation in transplant production systems. Transplanting operation is labor-intensive and automation can reduce labor costs. Plugs are actively growing young transplants with two well-defined morphologic parts: the stem-leaf portion and the root-growth medium portion. They may be grown in regularly situated cells on traylike containers. This regularity makes plugs suitable for automated transplanting operations. It is, therefore, beneficial for in vitro plant propagation systems to include plugs as intermediate products before they are delivered to the greenhouses. Flexible automation and robotics technologies have been applied to develop a robotic workcell for transplanting plugs from plug trays to growing flats. Main components of the workcell include a robot, an end-effector, and two conveyer belts for transporting trays and flats. The end-effector for extracting, holding, and planting plugs is a “sliding-needles-with-sensor” gripper. The sensor signals the robot to complete a transplanting cycle only when a plug is properly held by the gripper. Systems analysis and computer simulation were conducted to study factors affecting workability and productivity of various workcell designs. These factors included: dimensions and kinematics of the robot and its peripheral equipment, layout and materials flow, fullness of plug trays, and successful extraction rate of plugs. The analysis also indicated that machine vision systems could add valuable capabilities to the workcell, such as robot guidance and plug quality evaluation. Engineering economic analysis was performed to investigate the interaction of workcell technical feasibility and economic viability.
Similar content being viewed by others
References
Fang, W.; Ting, K. C.; Giacomelli, G. A. Engineering economics of SCARA robot-based plug transplanting workcell. ASAE Paper No. 917026, St. Joseph, MI: American Society of Agricultural Engineers; 1991.
Hamrick, D., editor. GrowerTalks on plugs. Geneva, IL: GrowerTalks magazine. George J. Ball, Publisher, 1990.
Ling, P. P.; Tai, Y. W.; Ting, K. C. Vision guided robotic seedling transplanting. ASAE Paper No. 907520, St. Joseph, MI: American Society of Agricultural Engineers; 1990a.
Ling, P. P.; Giacomelli, G. A.; Ting, K. C. Feature measurement of germinated tomato seeds for uniform flowering. ASAE Paper No. 907056, St. Joseph, MI: American Society of Agricultural Engineers; 1990b.
Ruzhitsky, V. N.; Ling, P. P. Machine vision based quality estimation for robotic transplanting. ASAE Paper No. 913505, St. Joseph MI: American Society of Agricultural Engineers; 1991.
Ting, K. C. Automate flexibly with robots. Greenhouse Grower 5(11):24–28; 1987.
Ting, K. C.; Giacomelli, G. A. A robot for transplanting plugs. Greenhouse Grower 6(12):58–60; 1988.
Ting, K. C. Robotic workcell for flexibly automated handling of young transplants. Presented at the 4th Toyota Conference—automation in biotechnology, October 21–24, Nisshin, Japan; 1990.
Ting, K. C.; Giacomelli, G. A. End-effectors for seedling transplanting. In: Proceedings of 1990 International Robotics & Machine Vision Automation Conference, June 5–7, Detroit, MI. Ann Arbor, MI: Robotic Industries Association; 1990a:727–739.
Ting, K. C.; Giacomelli, G. A. Robotics research on transplanting of seedlings. In: Proceedings of the First International Workshop—Robotics in Agriculture and the Food Industry, June 14–15, Avignon, France. Teknea, Marseille, France: 1990b:85–90.
Ting, K. C.; Giacomelli, G. A.; Shen, S. J. Robot workcell for transplanting of seedlings part I—layout and materials flow. Trans. ASAE 33(3):1005–1010; 1990a.
Ting, K. C.; Giacomelli, G. A.; Shen, S. J., et al. Robot workcell for seedling transplanting of seedlings part II—end-effector development. Trans. ASAE 33(3):1013–1017; 1990b.
Ting, K. C.; Yang, Y.; Fang, W. Stochastic modeling of robotic workcell for seedling plug transplanting. ASAE Paper No. 901539, St. Joseph, MI: American Society of Agricultural Engineers; 1990c.
Ting, K. C.; Giacomelli, G. A. Robotics applications to transplanting of plug seedlings. In: Prakash, J.; Pierik, R. L. M., eds. Horticulture—new technologies and applications, The Netherlands: Kluwer Publishers; 1991:307–309.
Yang, Y. Performance of sliding-needles gripper and SCARA robot-based workcell for seedling transplanting. New Brunswick, NJ: Rutgers University 1990 Thesis.
Yang, Y.; Ting, K. C.; Giacomelli, G. A. Factors affecting performance of sliding-needles gripper during robotic transplanting of seedlings. Appl. Engineering Agric. 7(4):493–498; 1991.
Author information
Authors and Affiliations
Additional information
Presented in the Session-in-Depth Robotics in Tissue Culture at the 1991 World Congress on Cell and Tissue Culture, Anaheim, California, June 16–20, 1991.
Rights and permissions
About this article
Cite this article
Ting, K.C., Giacomelli, G.A. & Ling, P.P. Workability and productivity of robotic plug transplanting workcell. In Vitro Cell Dev Biol - Plant 28, 5–10 (1992). https://doi.org/10.1007/BF02632184
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02632184