Abstract
The formaldehyde release from particleboard under changing climatic conditions and with varying amounts of exposed particleboard was studied in a large climate chamber. A mathematical model was developed which describes the influence of the various parameters on the formaldehyde concentration in the atmosphere of a room containing particleboards. After determining the formaldehyde concentration under standard conditions by a laboratory method, the formaldehyde concentration under any other climatic conditions can be calculated. The mathematical relations presented in this paper are of model character, therefore, they cannot be transferred uneritically to every board system.
Zusammenfassung
Die Formaldehydabgabe aus Spanplatten unter wechselnden klimatischen Bedingungen und bei unterschiedlicher Plattenmenge wurde in einer großen Klimakammer untersucht. Es wurde eine mathematisches Modell entwickelt, das es ermöglicht, den Einfluß verschiedener Parameter auf die Formaldehydkonzentration der Raumluft eines mit Spanplatten bestückten Raumes zu erfassen. Hat man die Formaldehydkonzentration mit einem bestimmten Prüfverfahren unter Standardbedingungen festgestellt, so kann sie für beliebige andere Klimata durch Rechnung ermittelt werden. Die hier dargestellten mathematischen Beziehungen haben Modellcharakter; sie lassen sich deshalb nich unkritisch auf jedes beliebige Plattensystem übertragen.
Similar content being viewed by others
Literatur
Andersen, I., Lundquist, G.R., Mölhave, L. 1974: Formaldehyde in the atmosphere in Danish homes. Ugeskr. Laeg. 136: 2133–2139
Andersen, I., Lundquist, G.R., Mölhave, L. 1974: Liberation of formaldehyde from particleboard under controlled conditions in a climate chamber. Ugeskr. Laeg. 136: 2140–2145
Andersen, I., Lundquist, G.R., Mölhave, L. 1974: Liberation of formaldehyde from particleboard. A mathematical model. Ugeskr. Laeg. 136: 2145–2150
Berge, A., Mellegaard, B. 1979: Formaldehyde emission from particleboards—a new method for determination. Forest Prod. J. 29: 21–25
Berge, A., Mellegaard, B., Hanetho, P., Ormstad, E.B. 1979: Formaldehyde emission from particleboards—I. Report for the Royal Norwegian Council for Scientific and Industrial Research, STF 21F 79026
Bricker, C.E., Johnson, H.R. 1945: Spectrophotometric method for determining formaldehyde. Ind. Eng. Chem., Anal. Ed. 17: 400–402
Hertzberg, T. 1970: MODTL—a computer program for the adaption of non linear models to experimental data. University of Trondheim, The Norwegian Institute of Technology
Hoetjer, J.J. 1978: Formaldehyde in der Luft—Wieviel kommt aus der Spanplatte. Holz-Zbl. 120: 1836–1838
Matsumoto, T. 1974. Concentration of formaldehyde released from plywood in an environmental testroom. Ringyo Shikenjo Kenkyu Hokuku (Bull. Gov. For. Exp. Sta.) (262): 41–58
Stöger, G. 1965. Beitrag zur Berechnung und Prüfung der Formaldehydabspaltung aus harnstoffharzgebundenen Spanplatten. Holzforsch. Holzverwert. 17: 93–98
Author information
Authors and Affiliations
Additional information
The authors acknowledge the support from the Royal Norwegian Council for Scientific and Industrial Research
Rights and permissions
About this article
Cite this article
Berge, A., Mellegaard, B., Hanetho, P. et al. Formaldehyde release from particleboard—Evaluation of a mathematical model. Holz als Roh-und Werkstoff 38, 251–255 (1980). https://doi.org/10.1007/BF02616395
Issue Date:
DOI: https://doi.org/10.1007/BF02616395