Zusammenfassung
Das gute Brandverhalten mineralisch gebundener Platten ist auf ihren niedrigen Gehalt an organischem Material und auf das Kristallwasser im Bindemittel zurückzuführen. Systematische Untersuchungen über das Brandverhalten derartiger Platten liegen kaum vor. Heizwert-, Wärmeabgabe-, Rauchentwicklungs-und Toxizitäts-Untersuchungen in Japan und Deutschland zeigen eine gute Korrelation zum Holz-Bindemittel-Verhältnis. Die Rohdischte beeinflußt die Tempeaturerhöhung beim Nichtbrenbarkeits-Versuch nur innerhalb der ersten 15 min. Die Brandprüfvorschriften differieren international stark. Gefordert werden dabei Versuche zur oberflächlichen Flammenausbreitung und zur Wärmeabgabe sowie in einigen Ländern zusätzlichen Nachweise zur Rauchentwicklung und Toxizität. In den meisten Ländern werden mineralisch gebundene Faser- und Spanplatten als nichtbrennbar klassifiziert.
Abstract
The good fire behaviour of mineral bonded boards is due to their low contents of organic material and the crystal water in the binder. Only limited information is available on systematic tests to evaluate the fire behaviour of such boards. Calorimetric, rate of heat release, smoke and toxicity tests in Japan and West Germany show a strong correlation with wood/binder ratio. Board density affects temperature rise in the non-combustibility test methods within the first 15 min only. Standard fire test methods differ widely in individual countries. Basically surface spread of flame and heat release tests are required as well as in some countries smoke development and toxicity tests. Mineral-bonded boards are mostly classed as non-combustible.
Literatur
Fulgurit (1988): unveröffentlichte Ergebnisse der Fa FULGURIT, Wunstorf
Kossatz, G.; Lempfer, K. 1987: Gipsspanplatten, ein neuer nichtbrennbarer Holzwerkstoff. München: DGfH-Mitteilungsheft No. 67: 16–20
Namloka, Y.; Takahashi, T.; Anazawa, T.; Kitazawa, M. 1976: Studies on the manufacturing of wood based cement boards. Report of the Hokkaido Forest Prod. Res. Inst. No. 65:88–142
Takahashi, T., Kitazawa, M.; Namioka, Y. 1977: The test manufacturing of wood based bypsum boards (2). J. Hokkaido Forest Prod. Res. Inst. No. 310, 1: 7
Teichgräber, R.: Topf. P. (1973): Proposal for an ignitability test. ISO TC 92 WG4 (Germ.-14) 129, BSI.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Topf, P. Brandverhalten von mineralisch gebundenen Platten. Holz als Roh-und Werkstoff 47, 415–419 (1989). https://doi.org/10.1007/BF02607997
Issue Date:
DOI: https://doi.org/10.1007/BF02607997