Abstract
The change in fracture toughness of an orthophthalate based medium reactivity polyester resin with change in resin flexibility, catalyst content, cure temperature and liquid environment, has been investigated. Various specimen geometries including simple double cantilever beam and tapered double cantilever beam have been used and the results obtained with the different geometries are in good agreement. The critical flaw size for the resin has been determined and an estimate obtained of the radius of the plastic zone under plane strain conditions. The solvent absorption characteristics of the resin were found to be effected by catalyst content, resin flexibility and by residual strains. Observations of the fracture behaviour, using both fracture toughness and tensile specimens have revealed a fracture surface morphology very similar to that of glass but with limited plastic deformation occurring.
Similar content being viewed by others
References
H. V. Boenig, “Unsaturated Polyesters” (Elsevier, London, 1964) p.33.
J. L. Koenig andP. T. Shih,J. Polymer Sci. A-210 (1972) 721.
H. V. Boenig,op. cit.,“ p.34.
Crystic Monograph No.2, “Polyester Handbook”, (Scott Bader, Wellingborough, 1971) p.71.
T. G. Rochow andF. G. Rowe,Anal. Chem.21 (1949) 21.
R. A. Spurr, E. H. Erath, H. Myers andD. C. Pease,Ind. Eng. Chem.49 (1957) 1839.
E. H. Erath andR. A. Spurr,J. Polymer Sci.35 (1959) 391.
E. H. Erath andM. Robinson,ibidC3 (1963) 65.
H. P. Wohnsiedler,ibidC3 (1963) 77.
G. Nenkov andM. Mikhailov,Makromol. Chem.129 (1969) 137.
S. S. Lebane, S. Newman andA. J. Champfff, Eds., “Polymer Networks” (Plenum Press, New York, 1971) pp. 453–75.
R. E. Cuthrell,J. Appl. Polymer Sci.11 (1967) 949.
Idem, ibid12 (1968) 1263.
A. A. Griffith,Phil. Trans. Roy. Soc. A21 (1920) 180.
E. B. Shand,J. Amer. Ceram. Soc.37 (1954) 52.
A. A. Griffith, Proceedings of the First International Congress on Applied Mechanics Delft, 1924, p.55.
E. Orowan,Rep. Prog. Phys.12 (1948) 185.
E. Orowan,Weld. J. London34 (1955) 1575.
K. R. Linger andD. G. Holloway,Phil. Mag.18 (1968) 1269.
D. M. Marsh,Proc. Roy. Soc. A282 (1964) 33.
S. M. Wiederhorn, A. M. Shorb andR. L. Moses,J. Appl. Phys.39 (1968) 1569.
L. J. Broutman andT. Kobayashi, “Fracture Studies in Glassy Polymers”, Report No. AMMRC- CR-13, Illinois Inst. of Tech., Chicago, August, 1969.
K. Selby andL. E. Miller,J. Mater. Sci.10 (1975) 12.
K. H. G. Ashbee, F. C. Frank andR. C. Wyatt,Proc. Roy. Soc. A300 (1967) 415.
K. H. G. Ashbee andR. C. Wyatt,ibid312 (1969) 553.
R. C. Whatt andK. H. G. Ashbee,Fibre Sci. Tech.2 (1969) 29.
B. E. Nelson andD. T. Turner,J. Polymer Sci. B9 (1971) 677.
Idem, J. Polymer Sci. (Phys.)10 (1972) 2461.
J. F. Knott,Mater. Sci. Eng.7 (1971) 1.
J. G. WilliamsInt. J. Fracture Mechs.8 (1972) 393.
G. P. Marshall, L. G. Coutts andJ. G. Williams,J. Mater. Sci.9 (1974) 1409.
J. P. Berry,J. Polymer Sci.50 (1961) 31.
L. J. Broutman andF. J. McGarry,J. Appl. Polymer Sci.9 (1965) 589.
J. P. Berry,J. Polymer Sci. A1 (1963) 993.
L. J. Broutman andF. J. McGarry,J. Appl. Polymer Sci.9 (1965) 609.
N. J. Owen andR. G. Rose,J. Phys. D6 (1973) 42.
L. J. Broutman andS. Sahu,Mater. Sci. Eng.8 (1971) 98.
B. Harris andE. Moncunill De Ferran,J. Mater. Sci.4 (1969) 1023.
H. V. Boenig,J. Polymer Sci. A-210 (1974) 73.
“Study of Mechanisms of Armor Penetration Resistance”, Contract DA-04-495-AMC-93 (R), Illinois Institute of Technology, 30 January 1964.
F. J. McGarry andG. C. Selfridge, Proceedings of the 19th Annual Technical and Management Conference Reinforced Plastics Division, Soc. Plastics Ind, Inc, 1964.
F. J. McGarry andJ. Sultan, “Toughening Mechanism in polyester resin and composites”, R 67-66 Mass. Inst. of Tech. (December 1967).
E. H. Rowe, A. R. Siebert andR. S. Drake,Modern Plastics47 (1970) 110.
J. A. Kies, A. M. Sullivan andG. R. Irwin,J. Appl. Phys.21 (1950) 716.
I. Wolock andS. B. Newman, Fracture Topography, in “Fracture Processes in Polymeric Solids”, edited by B. Rosen, (Interscience, New York, 1964) pp. 235–290.
E. H. Andrews “Fracture in Polymers”, (Elsevier, New York, 1968) pp. 178–196.
E. F. Poncelet,J. Soc. Glass Tech.42 (1958) 279T.
W. B. Bradley andA. S. Kobayashi,Eng. Fract. Mech.3 (1971) 317.
A. T. Di Benedetto andA. D. Wambach,Int. J. Polymeric Mater.1 (1972) 159.
J. P. Elinck, J. C. Bauwens andG. Homes,Int. J. Fracture Mech.7 (1971) 277.
P. I. Vincent andS. Raha,Polymer13 (1972) 283.
N. Brown andM. F. Parrish,J. Polymer Sci. Letters10 (1972) 777.
H. G. Olf andA. Peterlin,Polymer14 (1973) 78.
S. Mostovoy andE. J. Ripling,J. Appl. Polymer Sci.13 (1969) 1083.
J. B. Howard, Stress Cracking, in “Engineering Design for Plastics”, edited by E. Baer (Reinhold, New York, 1964).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Christiansen, A., Shortall, J.B. The fracture toughness and fracture morphology of polyester resins. J Mater Sci 11, 1113–1124 (1976). https://doi.org/10.1007/BF02396647
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02396647