Abstract
Experimental modal analysis of a tire was carried out. Mode shapes in the radial, tangential and lateral directions of the tire under radial and tangential excitation, respectively, were obtained for the first time. The consistency of tire experimental modal frequencies in three directions was observed after careful design and adjustment of the test method. This indicates the accuracy of the experiments. The phenomena discovered in this experimental study, such as the mode shapes of the rim and the complex modes of the tire, are discussed in detail. The modal parameters acquired from experimental modal analysis of the tire can be used for the modeling of tire dynamics.
Similar content being viewed by others
References
Böhm, F., “Mechanik des Gürtelreifeus,”Lug. Archiv.,35,82 (1996).
Fukuoka, N., “Vibration Characteristics of Tires,”J. Soc. Auto. Eng. Jap.,30,196–202 (1976)(in Japanese).
Yuosimura, S., “Vibration Characteristics and Vibration Resistance Design of Tires,”J. Jap. Soc. Mech. Eng.,88 (805),1383–1389 (1985)(in Japanese).
Takao, V. and Masahiro, T., “Modal Analysis of Tire and System Simulation,” SAE Technical Paper, Series No. 880585 (1988).
Savkoor, A.R. and Fejes, I., “Experimental Modal Analysis of Inplane and Out-of-plane Vibration of Pneumatic Tyres,” Technical Report 93.3 VT.4201, Vehicle Research Laboratory, Faculty of Mechanical Engineering and Marine Technology, Delft University of Technology (1993).
Guan, D., Liu, D., and Yu, L., “The Tire Experimental Modal Analysis and Probe to Establish Tire Model by Using Modal Parameters,” Dynamics of Vehicles on Road Rails, South-West Jiaotong University Press (1993).
Wu, W. andGuan, D., “Research on Tire Static Contact with Ground Using Experimental Modal Parameters,”J. Tsinghua Univ. (Sci. Tech.),36 (10),46–49 (1996).
Guan, D. andWu, W., “In-plane Tire Model for Vertical Contact Dynamics by Using Experimental Modal Parameters,”J. Tsinghua Univ. (Sci. Tech.),37 (12),91–94 (1997).
Guan, D., Wu, W., and Zhang, A., “Tire Modeling for Vertical Properties by Using Experimental Modal Parameters,” SAE Technical Paper, Series No. 980252 (1998).
Guan, D. andLiu, D., “Experimental Modal Analysis of Tire Structural Dynamic Characteristics,”J. Vibration Shock,15 (1),60–67 (1996).(in Chinese).
Guan, D. andWu, W., “Experimental Modal Analysis of Tire Dynamics,”Auto. Eng.,17 (6),328–333 (1995)(in Chinese).
Guan, D. and Wu, W., “Research on Static Vertical Properties of Tire by Using Experimental Modal Parameters,” Proceedings of the 10th Anniversary Meeting of the SAE of China, C960017, Beijing, 119–125 (1996).
Wu, W., “Tire Experimental Modal Analysis and Building Tire Model by Using Experimental Modal Parameters,” Doctoral diss., Tsinghua University (1996).
Yam, L.H., Guan, D., Shang, J., and Zhang, A.Q., “Calculation of Tire Rolling Resistance Using Experimental Modal Parameters,” Paper No. 3.3, Proceedings of the International Conference on Application of Modal Analysis '99, Gold Coast, Queensland (Dec. 1999).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yam, L.H., Guan, D.H. & Zhang, A.Q. Three-dimensional mode shapes of a tire using experimental modal analysis. Experimental Mechanics 40, 369–375 (2000). https://doi.org/10.1007/BF02326482
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02326482