Abstract
This is the second paper in a series of three devoted to the application of scanning tunneling microscopy (STM) to mechanics problems. In this paper, improvements to the digital image correlation method are outlined, a technique that compares digital images of a specimen surface before and after deformation to deduce its two-dimensional surface displacement field and strains. The necessity of using the framework of large deformation theory for accurately addressing rigid body rotations to reduce associated errors in the strain components is pointed out. In addition, the algorithm is extended to compute the three-dimensional surface displacement field from STM data; also, significant improvements are achieved in the rate as well as the robustness of the convergence. For (STM) topographs, the resolution yields 4.8 nm for the in-plane and 1.5 nm for the out-of-plane displacement components spanning an area of 10 μm×10μm.
Similar content being viewed by others
References
Walker, C.A. andMcKelvie, J., “A Practical Multiplied Moiré Method,” EXPERIMENTAL MECHANICS,18 (8),316–320 (1978).
Tippur, H.V., Krishnaswamy, S., andRosakis, A.J., “Crack Tip Deformation Measurements Using Coherent Gradient Sensing,” 2nd Int. Conf. Photomechanics and Speckle Metrology, Proc. SPIEE,1554A,176–191 (1991).
Sutton, M.A., Wolters, W.J., Peters, W.H., Ranson, W.F., andMcNeil, S.R., “Determination of Displacements Using an Improved Digital Correlation Method,”Image Vision Computing,1 (3),133–139 (1983).
Sutton, M.A., Cheng, M., Peters, W.H., Chao, Y.J., andMcNeil, S.R., “Application of an Optimized Digital Image Correlation Method to Planar Deformation Analysis,”Image Vision Computing,4 (3),143–150 (1986).
Sutton, M.A., McNeil, S.R., Jang, J., andBabai, M., “The Effect of Subpixel Image Restoration on Digital Image Correlation Estimates,”Opt. Eng.,27 (10),870–877 (1988).
Luo, P.F., Chao, Y.J., Sutton, M.A., andPeters, W.H., “Accurate Measurement of Three-dimensional Deformations in Deformable and Rigid Bodies Using Computer Vision,” EXPERIMENTAL MECHANICS,33 (2),123–132 (1993).
James, M.R., Morris, W.L., andCox, B.N., “A High Accuracy Automated Strain-field Mapper,” EXPERIMENTAL MECHANICS,30 (1),60–67 (1990).
Chu, T.C., Ranson, W.F., Sutton, M.A., andPeters, W.H., “Applications of Digital Image Correlation Techniques to Experimental Mechanics,” EXPERIMENTAL MECHANICS,25 (3),232–244 (1985).
Bruck, H.A., McNeil, S.R., Sutton, M.A., andPeters, W.H., “Digital Image Correlation Using Newton-Raphson Method of Partial Differential Correction,” EXPERIMENTAL MECHANICS,29 (3),261–267 (1989).
Jayakumar, P., “Modeling and Identification in Structural Dynamics,”Ph.D. thesis, Report EERL 87-01, California Institute of Technology, Pasadena, 146–149 (1987).
Vendroux, G. andKnauss, W.G., “Deformation Measurements at the Sub-micron Size Scale I: Design of a Digital Scanning Tunneling Microscope,”GALCIT Report SM94-4a, California Institute of Technology, Pasadena (1994).
Vendroux, G. andKnauss, W.G., “Submicron Deformation Field Measurements: Part 1. Developing a Digital Scanning Tunneling Microscope,” EXPERIMENTAL MECHANICS,38 (1),18–23 (1998).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vendroux, G., Knauss, W.G. Submicron deformation field measurements: Part 2. Improved digital image correlation. Experimental Mechanics 38, 86–92 (1998). https://doi.org/10.1007/BF02321649
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02321649