Abstract
The HE11 mode in corrugated circular waveguide can be converted to the EH11 mode (surface wave) by a short, smooth-waveguide phase shift section followed by a short corrugation depth taper. Low-power measurements at 110 GHz in 1.25 in. aluminum waveguide demonstrated approximately 99% conversion with the proper phase shift length. As expected, the conversion efficiency versus length of the phase shifter varied periodically with the period of the TE11 to TM11 beat wavelength. Since the EH11 surface wave is highly attenuated, this type of converter can be used effectively in a compact high-power dummy load.
Similar content being viewed by others
References
M. Thumm, V. Erckmann, W. Kasparek, H. Kumric, G.A. Muller, P.G. Schuller, and R. Wilhelm, Microwave J., Vol. 29, No. 11, 103–120 (1986).
C. Dragone, Bell Syst. Tech. J.56, 835–867 (1977).
Graeme L. James, IEEE Trans. Microwave Theory Tech.MTT-29, 1059–1066 (1981).
J.L. Doane, Int. J. Electronics53, 573–585 (1982).
J.B. Davies and B. J. Goldsmith, Philips Res. Rep.23, 207–232 (1968).
P.J.B. Clarricoats and A.D. Olver,Corrugated Horns for Microwave Antennas,Peter Peregrinus Ltd. for the IEE, Electromagnetic Waves Series 18, (London, 1984).
J.L. Doane, Int. J. Infrared and Millimeter Waves5, 737–751 (1984).
E.A.J. Marcatili and R.A. Schmeltzer, Bell Syst. Tech. J.43, 1783–1809 (1964).
J.L. Doane, Slotted Dielectric-Lined Waveguide Couplers and Windows, U.S. Patent 5,043,629.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Doane, J.L. Compact HE11 to surface wave converters for high power waveguide dummy loads. Int J Infrared Milli Waves 14, 363–382 (1993). https://doi.org/10.1007/BF02282079
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02282079