Abstract
By means of computer-controlled DSC, heat-capacity measurements were performed on NBS SRM 1484 betweens-70°C and 250°C, in heating as well as cooling. By using stepwise and continuous measuring methods together with enthalpy calculations, an insight was obtained into the intrinsic consistency and the accuracy of the measurements. The reference states of polyethylene within the two-phase model were used to determine the crystallinity as a function of temperature, and to evaluate various other methods employed for the same purpose.
Zusammenfassung
Die Wärmekapazität von NBS SRM 1484 wurde im Temperaturbereich von - 70 bis 250°C durch komputer-kontrollierte DSC sowohl während der Aufheizung- als auch während der Abkühlung gemessen. Durch Anwendung schrittweiser und kontinuierlicher Messmethoden zusammen mit Enthalpieberechnungen wurde ein Einblick in die innere Konsistenz und die Genauigkeit der Messungen gewonnen. Die Referenzzustände von Polyäthylen in dem Zweiphasenmodell wurden zur Bestimmung der Kristallinität in Abhängigkeit von der Temperatur und zur Bewertung verschiedener anderer, zum gleichen Zwecke angewandter Methoden herangezogen.
Резюме
С помощью ДСК, контрол ируемого ЭВМ, выполне ны измерения теплоемко сти для образца НБС СРМ 1484 м ежду −70°C и 250°C как при наг реве, так и охлаждении. Путе м использования ступе нчатого и непрерывно го метода измерений, совместно с вычислениями энтальпии, удалось пр оникнуть во внутренн юю последовательность и точность измерений. Эталонные состояния полиэтилена в предел ах двухфазной модели бы ли взяты для определе ния кристалличности в за висимости от температуры, а также д ля оценки других раз-л ичных методов, используемы х для той же самой цели.
Similar content being viewed by others
References
U. Gaur and B. Wunderlich, J. Phys. Chem. Ref. Data, 10 (1981) 119.
V. B. F. Mathot, accepted for publication in Polymer.
M. J. O'Neill, Anal. Chem., 38 (1966) 1331.
A. P. Gray, Instrument News (Perkin-Elmer Corp.), 20 (1969) 8.
A. P. Gray, Thermochim. Acta, 1 (1970) 563.
M. J. Richardson, Developments in Polymer Characterization, vol. 1, Applied Science Publ., London 1978, p. 205.
D. J. Blundell, D. R. Beckett and P. H. Willcocks, Polymer, 22 (1981) 704.
V. Mathot, M. Pijpers, J. Beulen, R. Graff and G. van der Velden, Proceedings of the Second European Symposium on Thermal Analysis, Heyden & Son, London 1981, p. 264.
H. C. Raine, R. B. Richards and H. Ryder, Trans. Faraday Soc., 41 (1945) 56.
M. Dole, W. P. Hettinger, Jr., N. R. Larson and J. A. Wethington, Jr., J. Chem. Phys., 20 (1952) 781.
J. D. Hoffman, J. Am. Chem. Soc., 74 (1952) 1696.
M. Dole, Fortschr. Hochpolym.-Forsch., 2 (1960) 221.
M. Dole, J. Polym. Sci. C, 18 (1967) 57.
M. J. Richardson, J. Polym. Sci. C, 38 (1972) 251.
B. Wunderlich, J. Phys. Chem., 69 (1965) 2078.
A. P. Gray and N. Brenner, Am. Chem. Soc. Div. Polymer Sci. Preprint, 6 (1965) 956.
U. Gaur, A. Mehta and B. Wunderlich, J. Thermal Anal., 13 (1978) 71.
A. B. Bestul and S. S. Chang, J. Chem. Phys., 43 (1965) 4532.
B. Wunderlich and M. Dole, J. Polym. Sci., 24 (1957) 201.
C. M. L. Atkinson and M. J. Richardson, Trans. Faraday Soc., 65 (1969) 1774.
J. D. Hoffman, SPE (Soc. Plastics Engrs.) Trans., 4 (1964) 315.
E. W. Fischer and G. Hinrichsen, Kolloid Z. u. Z. Polymere, 213 (1966) 93.
H. Hendus and K. H. Illers, Kunststoffe, 57 (1967) 193.
L. Mandelkern, A. L. Allou, Jr. and M. Gopalan, J. Phys. Chem., 72 (1968) 309.
M. Glotin and L. Mandelkern, Coll. & Polym. Sci., 260 (1982) 182.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mathot, V.B.F., Pijpers, M.F.J. Heat capacity, enthalpy and crystallinity for a linear polyethylene obtained by DSC. Journal of Thermal Analysis 28, 349–358 (1983). https://doi.org/10.1007/BF01983270
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01983270