Abstract
β-modification and multi-component systems ofβ-polypropylene were prepared both under laboratory and processing conditions. Characteristic features of crystallization, melting, and annealing ofβ-PP are summarized. The very distinct memory effect in the melting and annealing ofβ-PP is also presented. The existence of a lower and an upper limit temperature ofβ-PP formation is demonstrated. The structural stability and the orientation-inducedβα-recrystallization ofβ-PP are analyzed. Preparation and properties of polymer blends and filled composites fromβ-PP are introduced, too.
Zusammenfassung
Sowohl unter Laboratoriums- als auch unter Betriebsbedingungen wurden die β-Modifikation und Multikomponentensysteme von β-Polypropylen hergestellt. Hierbei wurden die charakteristischen Wesenszüge von Kristallisation, Schmelzen und Tempern von β-PP beschrieben. Es wird auch der sehr ausgeprägte Memory-Effekt von β-PP bei Schmelzen und Tempern dargestellt. Für die Formierung von β-PP wird die Existenz einer unteren und einer oberen Grenztemperatur verdeutlicht. Es wurde weiterhin die strukturelle Stabilität und die dehnungsinduzierte β-α- Rekristallisation von β-PP untersucht. Herstellung und Eigenschaften von Polymergemischen und Verbundstoffen von β-PP wurden ebenfalls beschrieben.
Резюме
В лабораторных и заво дских условиях получ еныβ-модификация полипр опилена (ПП) и многокомпонентные системы на его основе. Приведены особенности кристал лизации, плавления и термообр аботкиβ-ПП. Установл ен резко различный характер э ффекта памяти при плавлении и термообр аботкеβ-ПП. Показано наличие низшего и верхнего пр еделов образованияβ-ПП. Проанализирован ы структурная устойч ивость и ориентационно-навед еннаяβα-перекристаллизац ия. Приведены также по лучение и свойства полимерных смесей и наполненных композитов на основеβ-ПП.
Similar content being viewed by others
References
G. Natta and P. Corradini, Atti, Acad. Naz. Lunsei Cl. Fis. Mat. Nat. Rend., 21 (1956) 365.
H. D. Keith, F. J. Padden, N. M. Walter and H. W. Wyckoff, J. Appl. Phys., 30 (1959) 1485.
A. Turner Jones, J. M. Aizlewood and D. R. Beckett, Makromol. Chem. 75 (1964) 134.
D. R. Morrow, J. Macromol. Sci. Phys., 133 (1969) 53.
F. J. Padden and H. D. Keith, J. Appl. Phys., 30 (1959) 1479.
J. Varga, J. Thermal Anal., 31 (1986) 165.
J. Varga and F. Tóth, Makromol. Chem. Makromol. Symp., 5 (1986) 213.
J. Varga and G. Garzó, Magyar Kém. Folyóirat, 93 (1987) 503.
J. Varga, G. Garzó and F. Tóth, Magyar Kém. Folyóirat, 94 (1988) 269
J. Varga and G. Garzó, Angew. Makromol. Chem., (in press)
J. Varga, Angew. Makromol. Chem., 104 (1982) 79.
J. Varga, A. Ille and Y. Fujiwara, Magyar Kém. Folyóirat, 94 (1988) 55.
J. D. Hoffmann, J. J. Weeks, J. Res. Natl. Bur. Stand., 66A (1962) 13.
B. Monasse and J. M. Haudin, Colloid Polymer Sci., 263 (1985) 822.
A. J. Lovinger, I. O. Chua and C. C. Gryte, J. Polym. Sci. Polymer Phys. Ed., 15 (1977) 641.
J. D. Hoffman, G. T. Davies and J. J. Lauritzen, In: “Treatise on Solid State Chemistry” Hanny N. B. Ed. Plenum Press, N. Y. 1973. Vol. 3. Chapter 7
E. J. Clark and J. D. Hoffman, Macromolecules, 17 (1984) 878.
J. Varga, Angew. Makromol. Chem., 112 (1983) 191.
J. Varga, Periodica Polytechnica. Chem. Eng., 28 (1984) 117.
A. Peterlin, Colloid. Polymer Sci., 265 (1987) 357.
T. Juska and I. R. Harrison, Polymer Eng Sci., 22 (1982) 766.
K. Kobayashy, In Geil P. H. Polymer Single Crystalls, Interscience, N. Y. 1964, p. 465.
J. Peterman, W. Kluge and H. Gleiter, J. Polym. Sci. Polym. Phys. Ed., 17 (1979) 1043.
F. J. Baltá-Calleja and H. G. Kilian. Colloid Polymer Sci., 266 (1988) 29.
J. Varga, Műanyagok szerkezete és tulajdonságai (Structure and properties of plastics), (in Hungarian); B. Kertész. Műanyag csomagolóanyagok (Plastic packing materials (in Hungarian), Műszaki Könyvkiadó, Budapest. 1985, Chapter 3.
J. Menczel and J. Varga, J. Thermal Anal., 28 (1983) 161.
J. Varga and F. Schulek-Tóth, Angw. Makromol. Chem., (in press).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Varga, J. β-Modification of polypropylene and its two-component systems. Journal of Thermal Analysis 35, 1891–1912 (1989). https://doi.org/10.1007/BF01911675
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01911675