Literature Cited
D. Broek, Fundamentals of Fracture Mechanics [Russian translation], Vysshaya Shkola, Moscow (1980).
W. Henning, M. Calve, and F. Osterstock, “Effect of R-curve and inhomogeneities on the toughness measurement of metallic classes,” in: Rapidly Solidified Metastable Materials, Symp., Boston, Mass., 14–17 Nov., 1983, North Holland, New York (1984), pp. 203–207.
J. C. Newman, “Fracture analysis of various cracked configuration in sheet and plate materials properties related to fracture toughness,” ASTM Spec. Techn. Publ., No. 605, 104–123 (1976).
I. S. Yablonskii, “Crack resistance of sheet materials under static loading,” Probl. Prochn., No. 11, 35–40 (1980).
D. A. Andreev and P. S. Miklyaev, “Determination of the fracture toughness Kc in specimens with small width,” Tekhnol. Legkikh Splavov, No. 2, 39–43 (1984).
A. M. Dotsenko and G. V. Denisova, “Correlation of crack resistance with mechanical properties,” Probl. Prochn., No. 9, 63–67, (1985).
G. S. Neshpor, A. A. Andreev, and A. A. Armyagov, “Correlation of fracture toughness in state of plane strain Kc with mechanical properties,” Zavod. Lab.,50, No. 3, 59–62 (1984).
D. Hellman and K. H. Schwalbe, “Geometry and size effects on J−R and σ−R curves under plane stress conditions,” Fract. Mech. Spec. Techn. Publ., No. 833, 577–605 (1984).
D. Hellman and K. H. Schwalbe, “On the determination of crack initiation using standard test methods,” J. Test. Eval.,14, No. 6, 292–297 (1986).
V. M. Markochev and E. M. Morozov, “Energy ratio in the deformation of a specimen with a crack (reply to the note of A. Ya. Krasovskii),” Probl. Prochn., No. 4, 60–64 (1982).
E. T. Moyer, Jr and H. Liebowitz, “Finite element methodology for elastic-plastic fracture problems in three dimensions,” Int. J. Methods Eng.,22, No. 3, 289–306 (1986).
V. Tvergaard and A. Needleman, “Effects of material rate sensitivity on failure mode in a Charpy V-notch test,” J. Mech. Phys. Sol.,24, No. 3, 213–242 (1986).
T. M. Golovinskaya, E. A. Dmitrieva, and A. A. Kaminskii, “Fracture toughness of heat resistant austenitic, steel,” Fiz.-Khim. Mekh. Mater.,22, No. 4, 104–107 (1986).
“Standards for boilers and pressure vessels, evaluation of defects in austenitic steel pipes,” Teor. Osnovy Inzh. Raschetov, No. 3, 146–171 (1986).
Avadzi and Sato, “Measurement of crack resistance in combined failure with the aid of disk specimens,” Teor. Osn. Inzh. Raschetov, No. 2, 67–75 (1978).
V. F. Luk'yanov, V. V. Naprasnikov, V. P. Golovin, and E. I. Kolokolov, “Development of rupture in welded joints of heterogeneous steels under transverse shear,” Avtomaticheskaya Svarka, No. 2, 10–13 (1987).
A. A. Lebedev, O. I. Marusii, N. G. Chausov, and L. V. Zaitseva, “Investigation of the kinetics of failure of ductile materials at the concluding stage of deformation,” Probl. Prochn., No. 1, 12–18 (1982).
A. A. Lebedev and N. G. Chausov, “Phenomenological foundations of the evaluation of the crack resistance of materials by the parameters of the descending sections of the strain diagrams,” Probl. Prochn., No. 2, 6–10 (1983).
O. I. Marusii, N. G. Chausov, and L. V. Zaitseva, “Effect of the crystallographic orientation on the failure of single crystals of alloy ZhS6F,” Probl. Prochn., No. 5, 86–90 (1984).
A. A. Lebedev, N. G. Chausov, and Yu. L. Evetskii, “Method of plotting full strain diagrams of sheet materials,” Probl. Prochn., No. 9, 29–32 (1986).
A. A. Lebedev, N. R. Muzyka, and Yu. L. Evetskii, “Complex of testing devices for investigating the strength of thin sheet materials in biaxial tension in the temperature range 20–300°K,” Probl. Prochn., No. 1 109–112 (1985).
Yu. L. Evetskii and N. G. Chausov, Inventors' Certificate No. 1224552 USSR, MKI G 01 B5/30, Strain Gauge, Otkrytiya, Izobret., No. 15, 154 (1986).
V. G. Gavrilyuk, D. S. Gertsriken, Yu. A. Polushkin, and V. M. Fal'chenko, “The mechanism of disintegration of cementite in plastic deformation of steel,” Fiz. Met. Metalloved.,51, No. 1, 147–152 (1981).
L. Yumen and Z. Jingen, “Deformation dislocation structure and fracture in low carbon steel,” Mater. Sci. Eng.,84, No. 2, 137–145 (1986).
Additional information
Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Problemy Prochnosti, No. 12, pp. 18–25, December, 1988.
Rights and permissions
About this article
Cite this article
Lebedev, A.A., Chausov, N.G., Marusii, O.I. et al. Kinetics of rupture of ductile sheet material at the concluding stage of deformation. Strength Mater 20, 1563–1570 (1988). https://doi.org/10.1007/BF01528958
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01528958