Contents
Parallel processing has been widely employed in real-time digital simulation of power transmission systems. This paper presents a new model using multiple modules and its integration method. According to this model and the given digital integration method a digital example simulation is carried out covering the following operating phases: electromagnetic and electromechanical transients after connecting a synchronous machine to the idle double-circuit high-voltage three-phase power transmission line (DHTT), automatic synchronization of the synchronous machine at the far end of the DHTT, parallel operation of the power transmission system (a DHTT with synchronous machines at both ends). The results show that the new model is fit for real-time digital simulation of this system.
Übersicht
Bei der digitalen Simulation von Starkstrom-Übertragungssystemen in Echtzeit ist die parallele Datenverarbeitung weit verbreitet. In diesem Beitrag wird ein neues Modell vorgestellt, in welchem das System in mehrere Module aufgespaltet wird, deren Verhalten dann parallel in Echtzeit simuliert werden kann. Eine dazu geeignete Integrationsmethode wird angegeben, mit deren Hilfe die elektromagnetischen und elektromechanischen Ausgleichsvorgänge berechnet werden, die bei der Aufschaltung einer Synchronmaschine auf eine unbelastete Doppelkreis-Hochspannungs-Drehstromübertragungsstrecke (DHTT) auftreten. Außerdem werden die Ausgleichsvorgänge ermittelt, die bei der automatischen. Synchronisation einer am anderen Ende zugeschalteten Synchronmaschine auftreten, und schließlich der Zustand untersucht, wenn beide Enden der DHTT parallel von Synchronmaschinen gespeist werden. Dieses numerische Beispiel zeigt, daß das vorliegende Modell für eine digitale Simulation des Starkstrom systems in Echtzeit geeignet ist.
Similar content being viewed by others
References
Thomas RJ, Thorp S, Linke, S, Pottle C, Strobman R (1985) The Cornell University Kettering Energy Systems Laboratory. IEEE Trans. PAS 109:2302–2305
Pottle C (1988) Prospects for Real-Time Simulation of Bulk Power Systems. Proc. Grainger Lecture Series 82-89
Falco DM, Kaszkurewicz E, Almeida HLS (1993) Application of Parallel Processing Techniques to the Simulation of Power System Electromagnetic Transients. IEEE Trans. Pow. Systems 8/1:90–96
Feng Z, Zhou Q, Wu H, Unbehauen R(1995) A Real-Time Digital Simulation Model of the Electromagnetic Transients of a Double-Circuit High-Voltage Line on the Same Tower. Electr. Eng. 78:331–338
Feng Z, Wu H, Unbehauen R(1996) A Real-Time Digital Simulation Model of the Electromagnetic Transients of one Phase Short Circuit of Double-Circuit High-Voltage Line on the Same Tower. Electr. Eng. 79:193–205
Cullen AM, Mathur RM (1995) Real-Time, Multi-Processor Simulator of Electromagnetic Transients of Transmission Lines with Frequency Dependent Parameters. Proc. ICDS 271-276
Rebhan M (1992) Modulare Echtzeitsimulation in der elektrischen Energietechnik. Dissertation, TU Braunschweig
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Feng, Z., Liao, X. & Unbehauen, R. A real-time digital simulation model of the electromagnetic transients in power transmission systems by parallel processing using multiple modules. Electrical Engineering 81, 121–127 (1998). https://doi.org/10.1007/BF01237895
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01237895