Abstract
The most commonly used input to a rapid prototyping (RP) system is thede facto stereolithography file (STL). Several problems plague these STL files owing to the very nature of STL files and the non-robustness of commercial CAD system model tessellators. The consequences of not correcting these errors are detrimental to the creation of the intended prototype. These are highlighted in the paper.
In Part 1 of two papers, a description of all STL-files-related errors is given. The paper also proposed a generic solution to solve one of the major problems in the proper creation of a prototype, that is, the problem of missing facets.
Part 2 deals with special cases of errors associated with the STL files. The performance evaluation of the proposed solution is also given.
Similar content being viewed by others
References
C. K. Chua, “Three-dimensional rapid prototyping technologies and key development areas”,Computing and Control Engineering Journal,5(4), pp. 200–206, 1994.
D. Kochan and C. K. Chua, “State-of-the-art and future trends in rapid prototyping and manufacturing”,International Journal of Information Technology,1(2), pp. 173–184, 1995.
A. Dolenc and I. Makela, “Leaf: a data exchange format for LMT processes”,Proceedings, Third International Conference on Rapid Prototyping, Dayton, USA, pp. 155–160, 7–10 June 1992.
S. Guduri, R. H. Crawford and J. J. Beaman, “A method to generate exact contour files for solid freeform fabricaiton”,Proceedings, Solid Freeform Fabrication Symposium 1992, Texas, USA, pp. 95–101, 3–5 August 1992.
S. J. Rock and M. J. Wozny, “A flexible format for solid freeform fabrication”,Proceedings, Solid Freeform Fabrication Symposium 1991, Texas, USA, pp. 1–12, 12–14 August 1991.
M. J. Wozny, “Systems issues in solid freeform fabrication”,Proceedings, Solid Freeform Fabrication Symposium 1992, Texas, USA, pp. 1–15, 3–5 August 1992.
R. H. Crawford, “Computer aspects of solid freeform fabrication: geometry, process control and design”,Proceedings, Solid Freeform Fabrication Symposium 1993, Texas, USA, pp. 102–111, 9–11 August 1993.
J. H. Bohn and M. J. Wozny, “Automatic CAD-model repair: shell-closure”,Proceedings, Solid Freeform Fabrication Symposium 1992, Texas, USA, pp. 86–94, 3–5 August 1992.
J. H. Bohn,Automatic CAD-Model Repair, UMI, Ann Arbor, MI, USA, 1993.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Leong, K.F., Chua, C.K. & Ng, Y.M. A study of stereolithography file errors and repair. Part 1. Generic solution. Int J Adv Manuf Technol 12, 407–414 (1996). https://doi.org/10.1007/BF01186929
Issue Date:
DOI: https://doi.org/10.1007/BF01186929