Summary
A new method is proposed for the analysis of elastic contact problems for a curved punch of non-elliptic planform under the action of a normal force. The punch base is assumed to be a quadratic surface. The method is based on an integral representation for the reciprocal distance between two points obtained by the author earlier. Some general relationships are established between the applied force and the punch settlement. Specific formulae are derived for a punch whose planform has a shape of a polygon, a rectangle, a rhombus and a cross. An example of a finite rigid cylinder lying on its generator and pressed against an elastic half-space is considered in detail. The method allows to have singular stresses at the cylinder edges and zero stresses at the rest of the boundary of the contact domain. The last condition serves for defining the width of the domain of contact. All the formulae are checked against the solutions known in the literature, and a good accuracy is confirmed in a sufficiently wide range of the aspect ratio.
Similar content being viewed by others
References
Ahmadi, N., Keer, L. M., Mura, T.: Non-Hertzian contact stress analysis for an elastic half-space — normal and sliding contact. International Journal of Solids and Structures19 (4), 357–373 (1983).
De Smedt, R.: Low-frequency penetration through apertures: Results for the integral equations. Laboratorium voor Electromagnetisme en Acustica, Internal report 79-9, University of Ghent, May 1979.
Fabrikant, V. I.: Closed form solution of a two-dimensional integral equation (in Russian). Izvestiya Vysshikh Uchebnykh Zavedenii, Matematika,2, 102–104 (1971).
Fabrikant, V. I.: Effect of shearing force and tilting moment on a cylindrical punch attached to a transversely isotropic half-space. Journal of Applied Mathematics and Mechanics (PMM)35, 147–151 (1971).
Fabrikant, V. I.: Flat punch of arbitrary shape on an elastic half-space. International Journal of Engineering Science, accepted for publication (1985).
Fabrikant, V. I.: Computer evaluation of singular integrals and their applications. International Journal for Numerical Methods in Engineering23, 1439–1453 (1986).
Fabrikant, V. I.: Inclined flat punch of arbitrary shape on an elastic half-space. ASME Journal of Applied Mechanics, accepted for publication (1986).
Glain, L. A.: Contact problems in the theory of elasticity (in Russian). Gostekhteorizdat, 1953; translated by Moss, H., Dept. of Math., North Carolina State College, Raleigh, 1961.
Kalker, J. J.: A survey of the mechanics of contact between solid bodies. Zeitschrift für Angewandte Mathematik und Mechanik57, T3-T17 (1977).
Kalker, J. J.: On elastic line contact. ASME Journal of Applied Mechanics39, 1125–1132 (1972).
Nayak, L., Johnson, K. L.: Pressure between elastic bodies having a slender area of contact and arbitrary profiles. International Journal of Mechanical Science21, 237–247 (1979).
Noble, B.: The numerical solution of the singular integral equation for the charge distribution on a flat rectangular lamina. Sympos. Numerical Treatment of Ordinary Differential Equations, Integral and Integrodifferential Equations. (Proc. Rome Sympos. 20–24 September 1960), Berlin-Stuttgart: Birkhäuser 1960.
Rvachev, V. L., Protsenko, V. S.: Contact problems of the theory of elasticity for non-classical domains. (in Russian). Kiev: Naukova Dumka 1977.
Tuck, E. O., Mei, C. C.: Contact of one or more slender bodies with an elastic half-space. International Journal of Solids and Structures19, 1–23 (1983).
Author information
Authors and Affiliations
Additional information
With 3 Figures
Rights and permissions
About this article
Cite this article
Fabrikant, V.I. Frictionless elastic contact problem for a curved rigid punch of arbitrary shape. Acta Mechanica 67, 1–25 (1987). https://doi.org/10.1007/BF01182119
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01182119