Skip to main content
SpringerLink
Log in

A bimodal plasticity theory of fibrous composite materials

  • Contributed Papers
  • Published:
Acta Mechanica Aims and scope Submit manuscript

Summary

It is shown that elastic-plastic response of metal matrix composites reinforced by aligned continuous fibers can be described in terms of two distinct modes. In the matrix-dominated mode, the composite deforms primarily by plastic slip in the matrix, on planes which are parallel to the fiber axis. In the fiber-dominated mode, both phases deform together in the elastic and plastic range. Constitutive equations are derived for the matrix-dominated mode of deformation in composites with elastic-perfectly plastic matrices. Response in the fiber-dominated mode is approximated by the self-consistent and Voigt models. The two deformation modes give different branches of the overall yield surface which identify the state of stress that activates a particular mode, and indicate the conditions for mode transition in a given composite system. The matrix-dominated mode is found to exist in systems reinforced by fibers of large longitudinal shear stiffness, such as boron or silicon carbide. Systems reinforced by more compliant fibers, such as graphite, appear to deform exclusively in the fiber-dominated mode. The results show good agreement with experimental data, and with predictions obtained from a more accurate material model. They also help to reconcile several different plasticity theories of fibrous composites, and suggest limits of their validity.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Dvorak, G. J., Teply, J. L.: Periodic hexagonal array models for plasticity analysis of composite materials. In: Plasticity today: modelling, methods and applications, W. Olszak memorial volume (Sawczuk, A., Bianchi, V., eds.), p. 623. Elsevier 1985.

  2. Teply, J. L., Dvorak, G. J.: Bounds on overall instantaneous properties of elastic-plastic composites. To appear in the Journal of the Mechanics and Physics of Solids.

  3. Hill, R.: Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids11, 357–372 (1963).

    Google Scholar 

  4. Walpole, L. J.: On the overall elastic moduli of composite materials. J. Mech. Phys. Solids17, 235–251 (1969).

    Google Scholar 

  5. Huang, W. C.: Plastic behavior of some composite materials. J. Composite Materials5, 320–338 (1971).

    Google Scholar 

  6. Yamada, Y., Yoshimura, N., Sakurai, T.: Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method. Int. J. Mech. Sci.10, 345–354 (1968).

    Google Scholar 

  7. Phillips, A., Liu, C. S., Justusson, J. W.: An experimental investigation of yield surfaces of elevated temperatures. Acta Mechanica14, 119–146 (1972).

    Google Scholar 

  8. Stowell, E. Z., Liu, T. S.: On the mechanical behavior of fiber-reinforced crystalline materials. J. Mech. Phys. Solids9, 242–260 (1961).

    Google Scholar 

  9. Kelly, A., Davies, G. J.: The principles of fiber reinforcement of metals. Metallurgical Reviews10, 1–77 (1965).

    Google Scholar 

  10. Cratchley, D.: Experimental aspects of fiber-reinforced metals. Metallurgical Reviews10, 79–144 (1965).

    Google Scholar 

  11. Mulhern, J. F., Rogers, T. G., Spencer, A. J. M.: A continuum model for fiber-reinforced plastic materials. Proc. Roy. Soc.301, 473–492 (1967).

    Google Scholar 

  12. Spencer, A. J. M.: Deformation of fibre-reinforced materials. Oxford University Press 1972.

  13. Spencer, A. J. M. (editor): Continuum theory of the mechanics of fibre-reinforced composites. CISM courses and lectures No. 282. Springer 1984.

  14. Helfinstine, J. D., Lance, R. H.: Yielding of fiber reinforced Tresca material. J. Engineering Mechanics Division ASCE,EM 4, 849–866 (1972).

    Google Scholar 

  15. Dvorak, G. J., Bahei-El-Din, Y. A.: Elastic-plastic behavior of fibrous composites. J. Mech. Phys. Solids27, 51–72 (1979).

    Google Scholar 

  16. Dvorak, G. J., Bahei-El-Din, Y. A.: Plasticity analysis of fibrous composites. J. Applied Mechanics49, 327–335 (1982).

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Civil Engineering, Rensselaer Polytechnic Institute, 12180, Troy, NY, USA

    G. J. Dvorak &  Y. A. Bahei-El-Din

Authors
  1. G. J. Dvorak
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Y. A. Bahei-El-Din
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

With 9 Figures

Prepared for the Symposium on Plasticity: Foundations and Future Directions. In Memory of Aris Phillips. January 28–30, 1987. University of Florida, Gainesville, U.S.A.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Dvorak, G.J., Bahei-El-Din, Y.A. A bimodal plasticity theory of fibrous composite materials. Acta Mechanica 69, 219–241 (1987). https://doi.org/10.1007/BF01175723

Download citation

  • Received:

  • Revised:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF01175723

Keywords

Search

Navigation