Abstract
The measurement of the elastic constants of several highly oriented thermoplastic polymer fibres is described. The method makes use of the hot-compaction process, developed and patented in this laboratory, which enables a solid section of highly oriented polymer to be produced from an aggregate of highly oriented fibres. As only a small fraction of the original fibre is melted and recrystallized during the process, the compacted materials offer a unique opportunity for measuring fibre properties in the bulk. An ultrasonic immersion technique is used to measure the elastic properties of the compacted materials, from which the properties of the polymer fibres are inferred. The experimentally determined fibre elastic properties have been compared with other oriented polymer materials to assess any similarities in elastic anisotropy between different methods for producing fibre orientation, and compared with theoretical upper limits for the fibre elastic properties based on theoretical estimates for the polymer crystal unit cell appropriately averaged for hexagonal symmetry using the aggregate model.
Similar content being viewed by others
References
P. J. Hine, R. A. Duckett andI. M. Ward,Compos. Sci. Technol. 49 (1993) 13.
X. Gong, P. J. Hine, R. A. Duckett andI. M. Ward;Polym. Compos. 15 (1994) 74.
J. F. Clarke, R. A. Duckett, P. J. Hine andI. M. Ward,Composites 25 (1994) 863.
O. Darras, P. J. Hine, R. A. Duckett and I. M. Ward,Compos. Sci. Technol. in press.
P. J. Hine, I. M. Ward, R. Olley andD. C. Bassett,J. Mater. Sci. 28 (1993) 316.
R. Olley, D. C. Bassett, P. J. Hine andI. M. Ward,ibid. 28 (1993) 1107.
M. A. Kabeel, D. C. Bassett, R. H. Olley, P. J. Hine andI. M. Ward,ibid.,29 (1994) 4694.
Idem, ibid. 30 (1995) 601.
J. Rasburn, P. J. Hine, I. M. Ward, R. H. Olley, D. C. Bassett andM. A. Kabeel,ibid.
B. E. Read andG. D. Dean, “The determination of the dynamic properties of polymers and composites” (Adam Hitget, Bristol, 1978) p. 162.
D. Lord, PhD thesis, University of Leeds (1989).
S. R. A. Dyer, D. Lord, I. J. Hutchinson, I. M. Ward andR. A. Duckett,J. Phys. D Appl. Phys. 25 (1992) 66.
A. Woolf,Polym. Test. 5 (1985) 375.
J. Rasburn, “The compaction of gel spun polyethylene”; Internal Report (1993).
D. L. Green. G. R. Davies andI. M. Ward Polymer in press.
W. P. Leung, F. C. Chen, C. L. Choy, A. Richardson andI. M. Ward,Polymer 25 (1984) 447.
O. K. Chan, F. C. Chen, C. L. Choy andI. M. Ward,J. Phys. D Appl. Phys. 11 (1978) 617.
J. Sweeney, B. Brew, R. A. Duckett andI. M. Ward,Polymer 33 (1992) 4901.
I. M. Ward,Proc. Phys. Soc. 80 (1962) 1176.
A. Odajima andM. Maeda,J. Polym. Sci. 19 (1979) 1023.
K. Tashiro, M. Kobayashi andH. Tadokoro,Macromolecules 11 (1978) 914.
N. Karasawa, S. Dasgupta andW. A. Goddard,J. Phys. Chem. 95 (1991) 2260.
R. A. Sorensen, W. B. Liau, L. Kesner andR. H. Boyd,Macromolecules 21 (1988) 200.
D. J. Lacks andG. C. Rutledge,J. Phys. Chem.,98 (1994) 1222.
I. M. Ward, “Mechanical properties of solid polymers”, 2nd Edn (Wiley, 1983) p. 314.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hine, P.J., Ward, I.M. Measuring the elastic properties of high-modulus fibres. J Mater Sci 31, 371–379 (1996). https://doi.org/10.1007/BF01139154
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01139154