Abstract
The main steps of the phase formation processes which take place in samples of W-type hexaferrites containing cadmium, prepared by chemical coprecipitation, have been analysed. The processes were followed by Mössbauer spectroscopy, powder X-ray diffraction, thermomagnetic analysis and magnetic measurements. For samples heated in the temperature range 1000–1100°C, the phase formation processes are the same as those verified for the other zinc, nickel, cobalt W-type compounds: forT h=1000°C the only phases present are SrFe12O19 (M-type ferrite) and CdFe2O4 (spinel ferrite); in contrast, forT h>1100°C, the solid state reaction between the M-type and the spinel phases does not take place and the spinel phase decomposes, leading to the formation of α-Fe2O3.
Similar content being viewed by others
References
P. B. Braun,Philips Res. Rep. 12 (1957) 491.
J. Smit andH. P. J. Wijin, “Ferrites” (Philips Technical Library, Eindhoven 1959).
E. P. Wohlfarth (ed.), “Ferromagnetic Materials”, Vol. 3 (North-Holland, Amsterdam 1982).
E. W. Gorter,Proc. IEEE 104B (1957) 255.
G. Albanese, M. Carbucicchio andG. Asti,Appl. Phys. 11 (1976) 81.
N. Suarez, J. L. Sanchez andS. Garcia,Phys. Status Solidi (a) 90 (1985) K171.
M. K. Fayek andM. K. Elminov,Ind. J. Pure Appl. Phys. 23 (1985) 145.
A. M. Van der Kraaw,Phys. Status Solidi (a) 18 (1973) 215.
F. Leccabue, R. Panizzieri, G. Salviati, G. Albanese andJ. L. Sanchez,J. Appl. Phys. 59 (1986) 2114.
F. Leccabue, R. Panizzieri, G. Albanese, G. Leo andN. Suarez,Mater. Res. Bull. 23 (1988) 263.
F. Leccabue, G. Salviati, N. Suarez, G. Albanese andG. Leo,IEEE Trans. Magn. MAG-24 (1988) 1850.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Albanese, G., Deriu, A., Calestani, G. et al. Formation of cadmium-containing W-type hexagonal ferrite. J Mater Sci 27, 6146–6150 (1992). https://doi.org/10.1007/BF01133764
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01133764