Abstract
Recently, commercial Zn-Al foundry alloys such as ZA-27 have found increasing use for many applications and have competed effectively against copper, aluminium and iron-based foundry alloys. However, the elevated temperature (> 100°C) properties of zinc-aluminium alloys are unsatisfactory and restrict their use in some applications. One viable approach to improving the elevated temperature properties is to reinforce the zinc-aluminium alloys with alumina fibres. In this investigation, the mechanical properties of a Zn-Al alloy reinforced with alumina fibres were evaluated. Tensile, compression and impact properties were determined at 25, 100 and 150°C. Lubricated wear tests were also performed on the unreinforced alloy and composites. It was found that although fibre reinforcement did result in some improvement of tensile and compression properties at elevated temperatures, the composites had poor toughness and ductility. The presence of a brittle SiO2 layer at the fibre/matrix interfaces resulted in fibre/matrix decohesion under tensile loading, impairing the performance of the reinforced materials. Some improvement in wear resistance was noted for the composite materials but fibre reinforcement did not yield significant improvement in fatigue resistance.
Similar content being viewed by others
References
B. Magnus, M. Melus andG. Croeg,La Fonderie Belge 4 (1982) 1927.
A. A. Das, B. Zantout, M. M. Yakoub andA. J. Clegg, in “International Symposium on Zinc-Aluminium (ZA) Casting Alloys”, edited by G. P. Lewis, R. J. Barnhurst and C. A. Loong, Series 25–5/1, No. 1 (Canadian Institute of Mining and Metallurgy, Montréal, Québec, 1986) p. 213.
R. Guerriero, J. B. Parse andI. Tangerini,ibid.in “ p. 229.
P. N. Dent andS. Murphy,ibid.in “, p. 127.
T. J. Risdon, R. J. Barnhurst andW. M. Mihaichuk, in “Comparative Wear Rate Evaluation of Zinc-Aluminum (ZA) and Bronze Alloys through Block on Ring Testing and Field Applications”, SAE Paper No. 860064 (1986) p. 1.
R. J. Barnhurst, E. Gervais andF. D. Bayles,AFS Trans. 91 (1983) 569.
M. Sahoo, L. V. Whiting, V. Chartrand andG. Weatherall,ibid. 94 (1986) 225.
L. Dignard-Bailey, S. Dionne andS. H. Lo, in “Proceedings of Symposium on Fundamental Relationships between Microstructure and Mechanical Properties of Metal-Matrix Composites” (The Minerals, Metals and Materials Society, Warrendale, PA, 1990) p. 23.
S. H. Lo, S. Dionne, L. Dignard-Bailey, M. Sahoo andJ. C. Farge, in “International Symposium on Processing of Ceramics and Metal Matrix Composites”, edited by H. Mostaghaci, The Metallurgical Society of CIM, Proceedings Vol. 17 (1989) p. 412.
M. Godet,Wear 136 (1990) 29.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lo, S.H.J., Dionne, S., Sahoo, M. et al. Mechanical and tribological properties of zinc-aluminium metal-matrix composites. J Mater Sci 27, 5681–5691 (1992). https://doi.org/10.1007/BF01119723
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01119723