Abstract
Methods available for the production of microwire, defined as fine filament of circular cross-section and diameter less than 1001 cm, are reviewed, with particular attention being devoted to the versatile Taylor-wire route. The process parameters which are considered to be important in determining the quality of material produced by this and other related techniques, and the types and properties of microwire, are outlined and compared. Techniques for producing related materials, including fibre of non-circular cross-section and narrow ribbon, are also reviewed briefly. In conclusion, a number of potential applications for microwire materials are discussed.
Similar content being viewed by others
References
G. F. Taylor,Phys. Rev. 23 (1924) 655.
Idem, US Patent 1 793 529 (1931).
A. V. Ulitovsky,Pribory i technika eksperimenta 3 (1957) 115.
A. A. Baikov, French Patent 1361929 (1963).
V. I. Zaborovsky, V. I. Korobov andV. G. Krasinkov, French Patent 1452979 (1965).
Idem, British Patent 1120247 (1968).
V. I. Zaborovsky, O. A. Ivanov andA. N. Savenkov, British Patent 1157 313 (1969).
Idem, US Patent 3607201 (1971).
W. L. McKenica, US Patent 3214805 (1965).
J. E. Cox, R. D. Veltri andC. E. Shulze, “Exploratory investigation of glass metal composite fibres”, United Aircraft Corp. Final Report No. D910242-6, East Hartford (1965).
P. J. Soltis, “Evaluation of the structure and strength of glass-drawn copper microwire”, NAEC-AML-2424, Philadelphia (1966).
A. C. Arno, “The development of microwires with high melting points”, Final Report Contract No. KH/L/521/CB. 19(6)2 (Glass Developments Ltd, 1966).
Anon.,Composites 1 (1970) 167.
B. Harris-Maddox, Glass Developments Ltd, private communication, (1984).
J. Nixdorf,Drahtwelt 53 (1967) 696 (in German).
W. Dannöhl andJ. Nixdorf, US Patent 3 362803, (1968).
H. Grunthaler, J. Nixdorf andH. Rochow,Metallwissenschaft und Technik 23 (1969) 310 (in German).
J. Nixdorf,Proc. R. Soc. A319 (1970) 17.
I. S. Miroshnichenko, V. F. Bashev, YU. K. Pokrovskiy andE. Z. Spektor,Russ. Metall. 1 (1980) 105.
V. F. Bashev,Phys. Met. Metall. 55 (2) (1983) 114.
G. Manfrè andD. Vianello, Italian Patent 930409 (1972).
H. J. Bunge andE. Irmer,Krist. Techn. 8 (1973) 355 (in German).
G. Manfrè, G. Servi andC. Ruffino,J. Mater. Sci. 9 (1974) 74.
H. Wiesner andJ. Schneider,Phys. Status Solidi 26 (1974) 71.
H. J. Bungs,Z. Metallkde 67 (1976) 720.
G. Haour andH. Bode, in Proceedings of Conference “From melt to wire”, Torremolinos, April 1979 (International Wire and Machinery Associations, Oxted, UK, 1979) II/2/ 1–10.
R. B. Pond, R. E. Maringer andC. E. Mobley, in “New trends in materials processing”, edited by C. S. Hartley, T. E. Tictz and B. H. Kear (ASM, Metals Park, Ohio, 1976) pp. 128–164.
G. W. F. Pardoe, E. Butler andD. Gelder,J. Mater. Sci. 13 (1978) 786.
T. Gotō,Bull. Jpn Inst. Metals 15 (1976) 633 (in Japanese).
T. Gotō andM. Nagano,Sen-I Gakkaishi 33 (1977) T302 (in Japanese).
T. Gotō, M. Nagano andK. Tanaka,Trans. Jpn Inst. Met. 18 (3) (1977) 209.
T. Gotō, H. Murakami, K. Tanaka andM. Nagano,ibid. 18 (8) (1977) 557.
T. Gotō andM. Nagano,ibid. 18 (8) (1977) 562.
T. Gotō, M. Nagano andN. Wehara,ibid. 18 (11) (1977) 759.
T. Gotō,Sen-I Gakkaishi 34 (1978) T237 (in Japanese).
Idem, Gold Bull. 11 (4) (1978) 124.
Idem, Trans. Jpn Inst. Met. 20 (1979) 377.
Idem, ibid. 21 (1980) 219.
Idem, ibid. 22 (2) (1981) 96.
Idem, ibid. 22 (11) (1981) 753.
Idem, ibid. 23 (5) (1982) 278.
Idem, in Proceedings of 4th International Conference on Rapidly Quenched Metals, edited by T. Masumoto and K. Suzuki (Japan Institute of Metals, Sendai, 1982) p. 1233.
Idem, Mater. Sci. Eng. 59 (1983) 251.
Idem, Trans. Jpn Inst. Met. 24 (8) (1983) 595.
Idem, ibid. 25 (5) (1984) 319.
T. Gotō andM. Hayashi,ibid. 26 (6) (1985) 444.
T. Gotō andN. Waku,J. Mater. Sci. 20 (1985) 532.
T. Gotō andT. Toyama,ibid. 20 (1985) 1883.
T. Gotō andA. Yoshino,ibid. 21 (1986) 1809.
H. A. Davies, in “Rapidly Quenched Metals III”, Vol. 1, edited by B. Cantor (Metals Society, London, 1978) pp. 1–21.
Idem (Butterworths, London, 1983) pp. 8–25.
I. W. Donald andH. A. Davies,J. Mater. Sci. 15 (1980) 2754.
J. Reeve, H. A. Davies andI. W. Donald, in Proceedings of 4th International Conference on Rapidly Quenched Metals, edited by T. Masumoto and K. Suzuki (Japan Institute of Metals, Sendai, 1982) p. 221.
B. L. Metcalfe, A. J. Jeffery andI. W. Donald, unpublished work (1986).
R. B. Pond, US Patent 2976590 (1961).
N. E. Aller andW. E. Smith, US Patent 3216076 (1965).
N. V. Shepel'skii andV. Z. Zhilkin,Sov. Powder Met. Ceram. 10 (1969) 813.
Monsanto Company, British Patent 1 153 577 (1969).
Idem, British Patent 1 197972 (1970).
Idem, British Patent 1210 920 (1970).
J. L. Engelke, US Patent 3347959 (1967).
S. Kavesh, US Patent 3845805 (1974).
I. Ohnaka, T. Fukusako andT. Ohmichi,J. Jpn Inst. Met. 45 (7) (1981) 751 (in Japanese).
T. Ohnaka, T. Fukusako, T. Ohmichi, T. Masumoto, A. Inoue andM. Hagiwara, in Proceedings of 4th International Conference on Rapidly Quenched Metals, edited by T. Masumoto and K. Suzuki (Japan Institute of Metals, Sendai, 1982) p. 31.
A. Inoue, M. Hagiwara andT. Masumote,ibid. p. 1399.
A. Inoue, T. Masumoto andH. Tomiaka,J. Mater. Sci. 19 (1984) 3097.
A. Inoue, T. Masumoto andN. Yano,ibid. 19 (1984) 3786.
A. Inoue, H. Tomiaka andT. Masumoto,ibid. 20 (1985) 2603.
I. Ohnaka,Int. J. Rapid Solid. 1 (3) (1985) 219.
R. V. Raman, A. N. Patel andR. S. Carbonara,Prog. Powder Metall. 38 (1982) 99.
J. W. Mottern andW. J. Privott (eds), “Spinning wire from molten metal”, Vol. 74 (American Institute of Chemical Engineers, (New York 1978).
J. A. Roberts andP. R. Roberts, US Patent 3 394 213 (1968).
Idem, US Patent 3 505 039 (1970).
Y. Tada, H. Ogita andT. Yoda, US Patent 3 838 488 (1974).
R. Pond, US Patent 2826108 (1958).
H. H. Liebermann andC. D. Graham,IEEE Trans. Magn. MAG-12 (1976) 921.
E. A. Strange andC. H. Pim, US Patent 905758 (1908).
E. Babil,J. Phys. E (Sci. Inst.) 3 (1970) 1014.
H. S. Chen andC. E. Miller,Rev. Sci. Inst. 41 (1970) 1237.
B. G. Lewis, I. W. Donald andH. A. Davies, in “Solidification and casting of metals” (The Metals Society, London, 1978) pp. 490–495.
R. E. Maringer andC. E. Mobley,J. Vac. Sci. Technol. 11 (1974) 1067.
D. L. K. King,Metals 2 (1967) 33.
Battelle Corp., US Patent 3 522 836 (1970).
I. G. Butler, W. Kurz, J. Gillot andB. Lux,Fibre Sci. Tech. 5 (1972) 243.
S. Kavesh, in Proceedings of International Conference on Rapid Solidification Processing, Reston, November, 1977, edited by R. Mehrabian, B. H. Kear and M. Cohen (Claitors, Baton Rouge, 1978) p. 165.
S. R. Robertson, T. J. Gorsuch andR. P. I. Adler,ibid. p. 188.
R. E. Maringer andC. E. Mobley,ibid. p. 208.
H. Jones, “Rapid Solidification of Metals and Alloys”, IM Monograph No. 8 (Institution of Metallurgists, London, 1982).
English Electric Co., French Patent 1466 793 (1967).
P. W. McMillan, B. P. Hodgson, D. S. Crozier andS. T. Wells, British Patent 1174 474 (1969).
W. J. Miriam, British Patent 1026 178 (1966).
A. Potter andJ. E. Henning, “Continuous glass coating of fine metal wires”, in Energ. Mater: Proceedings of Mater. Process Eng. Nat. Symp. Exhib, Chicago 1968, p. 417.
I. V. Litvinenko, A. P. Bibik andI. V. Radchenko,Pribory i technika eksperimenta 5 (1965) 252.
I. W. Donald andP. W. McMillan,J. Mater. Sci. 11 (1976) 949.
D. C. Phillips, “Fibre reinforced ceramics”, in Handbook of Composites, Vol. 4, edited by A. Kelly and S. T. Mileiko (Elsevier, Amsterdam, 1983) p. 373.
R. W. Rice, in Proceedings of 5th Annual Conference on Composites and Advanced Ceramic Materials (American Ceramic Society, Columbus, 1981) p. 661.
P. Bracke, H. Schurmans andJ. Verhoest, in “Inorganic Fibres and Composite Materials (Pergamon, Oxford, 1984) p. 97.
L. J. Schioler andJ. J. Stiglich,Bull. Amer. Ceram. Soc. 65 (2) (1986) 289.
I. W. Donald andP. W. McMillan,J. Mater. Sci. 12 (1977) 290.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Donald, I.W. Production, properties and applications of microwire and related products. J Mater Sci 22, 2661–2679 (1987). https://doi.org/10.1007/BF01086455
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01086455