Abstract
In this paper, the main factors influencing the morphology of solid metal obtained at the cathode of an electrolytic cell are discussed. Although the presentation is rather fundamental, important practical conclusions are derived. Specific topics linked to electrogalvanizing are stressed.
Similar content being viewed by others
References
H. Fischer, ‘Elektrolytische Abscheidung und Elektrokristallisation von Metallen’, Springer Verlag, Berlin (1954).
R. Winand, ‘Contribution à l'étude de l'électrocristallisation en sels fondus et des phénomènes connexes-Application au cas particulier du zirconium’, Ph.D. Thesis, Université Libre de Bruxelles (1960).
,Mém. Scient. Revue Mét. 58 (1961) 25–35.
,Trans./Sect. C, IMM 84 (1975) 67–75.
, in ‘Application of polarization measurements in the control of metal deposition’, Process Metallurgy, (edited by I. H. Warren), Elsevier, Amsterdam (1984) pp. 47–69.
W. K. Burton, K. Cabrera and F. C. Frank,Nature 163 (1949) 398–9.
K. J. Vetter, ‘Electrochemical kinetics’, Academic Press, New York (1967).
H. Fischer,Electrochim. Acta 2 (1960) 50–96.
R. Winand, G. Troch, M. Degrez and Ph. Harlet, in I. H. Warren (ed.)op. cit. [5], lsElectrochemical kinetics’, Academic Press, New York pp. 133–45. (1967).
H. Seiter, H. Fischer and H. Albert,Naturwissensch. 45 (1958) 127.
E. Budevski,J. Crysta. Growth 13/14 (1972) 93–6.
J. Cl. Evenepoel and R. Winand,Revue ATB Mét. 10 (1970) 133–46.
R. Winand and A. Fontana,Trans. Sect C. Inst. Mining and Met. 84 (1975) 67–76.
K. B. Tshula, ‘Contribution à l'étude de l'électroraffinage du cuivre’, Ph.D. Thesis, Université Libre de Bruxelles (1983).
L. Albert and R. Winand, 111th AIME annual meeting, Dallas (February 1982), TMS paper selection no. A82-26.
P. A. Andrianne, J. P. Dubois and R. Winand,Met. Trans. AIME,8B (1977) 315–21.
J. Scoyer and R. Winand,Surface Technology 5 (1977) 169–204.
J. Vereecken and R. Winand,Revue ATB Mét. 10 (1970) 147–50.
,J. Electrochem. Soc. 123 (1976) 643–46.
,Surface Technology 4 (1976) 227–35.
G. Troch, ‘Contribution à l'étude de l'influence d'inhibiteurs sur l'électrodéposition du cuivre en milieu sulfurique’, Ph.D. Thesis, Université Libre de Bruxelles (1983).
G. Troch, M. Degrez and R. Winand,Electrochem. Soc. 84–1 (May 1984) 406–7.
M. Lambert and R. Winand,Oberfläche/Surface 18 (1977) 208–16.
M. Degrez, ‘Contribution à l'étude de l'électrodéposition du cuivre à haute densité de courant’, Ph.D. Thesis, Université Libre de Bruxelles (1981).
M. Degrez and R. Winand,Electrochim. Acta 29 (1984) 365–72.
A. Weymeersch, R. Winand and L. Renard,Plating and Surface Finishing 68 (1981) 56–60.
A. Weymeersch, R. Winand and L. Renard,68 (1981) 118–20.
G. Parissis, ‘Contribution à l'étude de l'électrodéposition du manganèse à haute densité de courant’, Ph.D. Thesis, Université Libre de Bruxelles (1982).
G. Parissis and R. Winand, in ‘Chloride electrometallurgy’, (edited by P. D. Parker), Conf. Proc. TMS, 111th AIME annual meeting, Dallas (February 1982) pp. 131–54.
A. Weymeersch, L. Renard, J. J. Conreur, R. Winand, M. Jorda and C. Pellet,Plating and Surface Finishing 73 (1986) 68–73.
A. Rodriguez Fajardo, ‘Contribution à l'étude de l'électrodéposition des alliages zinc-fer à haute densité de courant en solution sulfurique’, Ph.D. Thesis, Université Libre de Bruxelles (1987).
A. Rodriguez Fajardo, R. Winand, A. Weymeersch and L. Renard, Fundamental aspects of zinc-iron alloys electrodeposition, Fifth Continuous strip plating symposium American Electroplaters and Surface Finishers Society, Dearborn MI (May 1987).
H. M. Wang, S. F. Chen, T. J. O'Keefe, M. Degrez and R. Winand, paper submitted toJ. Appl. Electrochem 19 (1989) 174–182.
M. Degrez, A. Rodriguez Fajardo and R. Winand, Oberfläche-Surface30 (1989) (8) 20–28; (9) 14–20.
R. Winand, High current density electroplating-12th World Congress on surface finishing, Interfinish 88 Paris, (October 1988)Proceedings, Vol. 1, pp. 189–202.
R. Winand, Surface and Coatings Technology37 (1989) 65–87.
R. Winand, ‘Electrodeposition technology, theory and practice’, Electrochem. Soc., Vol.87–17 (1987) pp. 207–32.
I. H. Warren (editor), ‘Application of polarization measurements in the control of metal deposition’, Elsevier, Amsterdam (1984).
R. Weil and R. G. Barradas (editors), Proc. of a symp. on Electrocrystallization, Vol.81–6, Electrochem. Soc., Pennington (1981).
L. T. Romankiw and D. R. Turner, Proc. of a symp. on Electrodeposition Technology, theory and practice, Vol.87–17, Electrochem. Soc., Pennington (1987).
Extended abstracts of the Fall Meeting of the Electrochemical Society, San Diego CA, October 19–24 (1986), Vol.86–2, Section on electrodeposition.
Author information
Authors and Affiliations
Additional information
Based on a Keynote Lecture given at The International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH, Tokyo), 1989, organized by the Iron & Steel Institute of Japan.
Rights and permissions
About this article
Cite this article
Winand, R. Electrocrystallization: Fundamental considerations and application to high current density continuous steel sheet plating. J Appl Electrochem 21, 377–385 (1991). https://doi.org/10.1007/BF01024572
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01024572