References
É. L. Axelrod, Flexible Shells [Russian translation], Nauka, Moscow (1976).
N. A. Alumyae, "Representation of the basic relations of the nonlinear theory of shells," Prikl. Mat. Mekh.,20, No. 1, 136–139 (1956).
I. Ya. Amiro, O. A. Grachev, V. A. Zarutskii, et al., Stability of Ribbed Shells of Revolution [in Russian], Nauk. Dumka, Kiev (1987).
I. Ya. Amiro, V. A. Zarutskii, and P. S. Polyakov, Ribbed Cylindrical Shells [in Russian], Nauk. Dumka, Kiev (1973).
I. Ya. Amiro and V. A. Zarutskii, Theory of Ribbed Shells [in Russian], Vol. 2 of Methods of Shell Design (5 vols.), Nauk. Dumka, Kiev (1973).
I. Ya. Amiro and V. A. Zarutskii, "Studies in the area of the stability of ribbed shells," Prikl. Mekh.,19, No. 11, 3–20 (1983).
I. Ya. Amiro and V. A. Zarutskii, "Statics, dynamics, and stability of ribbed shells," Mekh. Def. Tv. Tela,21, 132–91 (1990).
I. Ya. Amiro and N. Ya. Prokopenko, "Refinement of critical loads for a ribbed cylindrical shell determined on the basis of a monomial approximation of the displacements," Prikl. Mekh.,23, No. 7, 20–26 (1987).
I. Ya. Amiro, V. A. Zarutskii, V. N. Revutskii, Yu. V. Skosarenko, A. I. Telalov, and S. Yu. Fialko, Vibrations of Ribbed Shells of Revolution [in Russian], Nauk. Dumka, Kiev (1988).
I. Arboch, "Investigation of the stability of shells: theory and practice," in: Loss of Stability and Buckling of Structures: Theory and Practice [Russian translation], Nauka, Moscow (1991).
I. Arboch, G. V. Babel, S. Ch. Butterman, et al., in: Thin-Walled Shell Structures: Theory, Experiment, and Design [Russian translation], Mashinostroenie, Moscow (1980).
V. A. Bazhenov, E. A. Gotsulyak, A. I. Ogloblya, et al., Design of Composite Structures with Allowance for Delamination [in Russian], Budivel'nik, Kiev (1992).
R. Bellman and R. Kalaba, Quasilinearization and Nonlinear Boundary-Value Problems [Russian translation], Mir, Moscow (1968).
I. A. Birger, Circular Plates and Shells of Revolution [in Russian], Oborongiz, Moscow (1961).
G. A. Vanin, N. P. Semenyuk, and R. F. Emel'yanov, Stability of Shells Made of Reinforced Materials [in Russian], Nauk. Dumka, Kiev (1978).
V. Z. Vlasov, General Theory of Shells and Its Use in Engineering [in Russian], Gostekhizdat, Moscow, Leningrad (1949).
A. S. Vol'mir, Stability of Deformable Systems [in Russian], Nauka, Moscow (1967).
I. I. Vorovich, "Existence of solutions in the nonlinear theory of shells," Izv. Akad. Nauk SSSR Ser. Mat.,19, 173–176 (1955).
I. I. Vorovich, "Some direct methods in the nonlinear theory of shallow shells," Prikl. Mat. Mekh.,20, No. 4, 449–474 (1956).
I. I. Vorovich, Mathematical Problems of the Nonlinear Theory of Shallow Shells [in Russian], Nauka, Moscow (1989).
I. I. Vorovich and V. F. Zipalova, "Solution of nonlinear boundary-value problems of the theory of elasticity by the method of conversion to a Cauchy problem," Prikl. Mat. Mekh.,29, No. 5, 894–901 (1965).
I. I. Vorovich and N. M. Minakova, "Stability of a nonshallow spherical dome," Prikl. Mat. Mekh.,32, No. 2, 332–338 (1968).
I. I. Vorovich and N. M. Minakova, "Stability problems and numerical methods in the theory of spherical shells," Itogi Nauki Tekh. Ser. Mekh. Deform. Tela,7, 5–86 (1973).
I. I. Vorovich and V. G. Shepeleva, "Study of the nonlinear stability of a shallow shell of double curvature in high approximations," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 3, 69–73 (1969).
G. D. Gavrilenko, "Finite-difference equations for calculating the stress — strain state of ribbed cylindrical shells," Samoletostr. Tekh. Vozdushn. Flota,42, 102–106 (1977).
G. D. Gavrilenko, "Study of nonuniform nonlinear problems of the theory of ribbed shells," Prikl. Mekh., No. 9, 25–31 (1979).
G. D. Gavrilenko, "Stability of flawed cylindrical shells," Dopov. Akad. Nauk Ukr. RSR, Ser. A, No. 7, 523–528 (1979).
G. D. Gavrilenko, "Stability of stringer-reinforced shells in a nonuniform stress-strain state," Prikl. Mekh.,16, No. 11, 41–46 (1980).
G. D. Gavrilenko, "Method of numerically solving nonaxisymmetric nonlinear problems of the statics and vibration of thin-walled ribbed cylindrical shells," Dopov. Akad. Nauk Ukr. RSR Ser. A, No. 3, 22–26 (1981).
G. D. Gavrilenko, "Stability of cylindrical shells with longitudinal indentations," Din. Prochn. Mash.,33, 32–35 (1981).
G. D. Gavrilenko, "Stability of flawed ribbed cylindrical shells with linear and nonlinear subcritical states," in: Stability of Plates and Shells [in Russian], Izd. Saratov, Un-ta, Saratov (1981), pp. 20–22.
G. D. Gavrilenko, "Study of the effect of local and regular asymmetric deflections on the critical loads of ribbed shells," Prikl. Mekh.,18, No. 4, 53–57 (1982).
G. D. Gavrilenko, "Basic nonlinear equations of the theory of imperfect ribbed shells of revolution," Dopov. Akad. Nauk Ukr. RSR Ser. A, No. 7, 523–528 (1982).
G. D. Gavrilenko, Stability of thin-walled ribbed conical shells," Prikl. Mekh.,19, No. 1, 36–40 (1983).
G. D. Gavrilenko, "Basic nonlinear and linearized equations of the theory of imperfect ribbed shells of revolution," Prikl. Mekh.,19, No. 7, 55–60 (1983).
G. D. Gavrilenko, "Stability of cylindrical shells subjected to concentrated forces," Prikl. Mekh.,6, No. 3, 25–31 (1970).
G. D. Gavrilenko, "Effect of shape defects and the stiffness characteristics of the ribs on the stability of conical shells," Prikl. Mekh.,22, No. 11, 55–60 (1986).
G. D. Gavrilenko, "Boundary conditions and differential equations of equilibrium and stability of nonideal ribbed shells of revolution," Probl. Prochn., No. 6, 96–99 (1987).
G. D. Gavrilenko, "Calculation of the stress-strain state of laminated cylindrical shells with ribs," Probl. Prochn., No. 6, 74–78 (1988).
G. D. Gavrilenko, "Stability of flawed spherical sections under external pressure," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 7, 33–36 (1988).
G. D. Gavrilenko, "Stability of spherical sections," Probl. Prochn., No. 10, 118–120 (1990).
G. D. Gavrilenko, Stability of Ribbed Cylindrical Shells in a Nonuniform Stress-Strain State [in Russian], Nauk. Dumka, Kiev (1989).
G. D. Gavrilenko, Numerical Methods of Calculating the Stability of Reinforced Shells [in Russian], Nauk. Dumka, Kiev (1991).
G. D. Gavrilenko, "Stability of cylindrical shells under combination loading," Dopov. Akad. Nauk Ukr. RSR Ser. A, No. 7, 41–43 (1992).
G. D. Gavrilenko and N. E. Aranchii, "Method of calculating the stability of imperfect elastic and inelastic ribbed shells of revolution," Sopr. Mater. Teor. Sooruzh.,56, 19–24 (1990).
G. D. Gavrilenko, M. F. Dudnik, and I. F. Larionov, "Stability of ribbed cylindrical shells in the presence of nonaxisymmetric dents," Prikl. Mekh.,20, No. 21, 31–35 (1984).
G. D. Gavrilenko and V. I. Matsner, "Subcritical state of ribbed spherical sections," Prikl. Mekh.,27, No. 11, 118–121 (1991).
G. D. Gavrilenko and V. I. Matsner, "Stability of cylindrical shells with a spiral reinforcement," Probl. Prochn., No. 3, 110–113 (1990).
G. D. Gavrilenko and V. I. Matsner, "Study of the local strength and stability of reinforced elements by the finite-differences method," Sudostroenie,40, 17–21 (1991).
G. D. Gavrilenko, V.I. Matsner, and V. N. Vaisman, "Effect of the angle of inclination of the spiral reinforcement on the stability of conical shells," Sopr. Mater. Teor. Sooruzh.,58, 35–38 (1991).
G. D. Gavrilenko, V. I. Matsner, and A. S. Sitnik, "Stability of flawed conical shells with a spiral reinforcement," Probl. Prochn., No. 12, 67–70 (1991).
G. D. Gavrilenko, V. I. Matsner, A. S. Sitnik, and S. N. Bilyk, "Stability of ribbed cylindrical shells under combination loading," Prikl. Mekh.,30, No. 1, 31–35 (1994).
G. D. Gavrilenko, A. S. Pal'chevskii, and Yu. E. Yakubovskii, "Determination of the critical loads of nonideal models of shells," Probl. Prochn., No. 6, 68–72 (1985).
G. D. Gavrilenko, V. A. Polyakov, and A. S. Sitnik, "Experimental and theoretical study of the stability of elements of air flues," Probl. Prochn., No. 7, 119–120 (1988).
G. D. Gavrilenko, A. A. Rudometskin, A. S. Sitnik, and S. S. Khalyuk, "Distribution of deflections and forces in a panel with an irregular reinforcement," Prikl. Mekh.,25, No. 9, 68–72 (1989).
G. D. Gavrilenko and A. S. Sitnik, "Study of the upper critical loads associated particular buckling modes for stringer-reinforced shells," Prikl. Mekh.,17, No. 3, 68–73 (1981).
G. D. Gavrilenko and A. S. Sitnik, "Analysis of buckling modes of ribbed shells," Probl. Prochn., No. 2, 68–70 (1984).
G. D. Gavrilenko and A. S. Sitnik, "Stability of ribbed shells with local indentations," Prikl. Mekh.,21, No. 11, 128–130 (1985).
G. D. Gavrilenko and A. S. Sitnik, "Stability of nonideal ribbed spherical sections," Prikl. Mekh.,26, No. 8, 43–46 (1990).
G. D. Gavrilenko, A. S., Sitnik, and A. L. Livshitz, "Stability of ring-reinforced shells subjected to nonuniform external pressure," Teor. Avtomat. Proektr., No. 4, 115–120 (1982).
G. D. Gavrilenko and A. S. Stepanenko, "Stability of orthotropic cylindrical shells with allowance for the moments in the subcritical state," Prikl. Mekh.,5, No. 3, 36–42 (1969).
G. D. Gavrilenko and A. S. Stepanenko, "Effect of boundary conditions and elastic characteristics on the stability of orthotropic cylindrical shells," Prikl. Mekh.,7, No. 10, 62–66 (1971).
G. D. Gavrilenko and S. Yu. Fialko, "Study of the free vibration of ribbed cylindrical shells," Sopr. Mater. Teor. Sooruzh.,38, 25–30 (1981).
G. D. Gavrilenko, S. S. Khalyuk, A. S. Sitnik, and A. A. Rudometkin, Rudometkin, Algorithms and Programs for Calculating the Strength and Stability of Ribbed Shells [in Russian], Est. NIINTI, Tallin (1990).
G. D. Gavrilenko, S. S. Khalyuk, S. S. Sitnik, A. A. Rudometkin, and A. S. Volkov, Method of Calculating the Stress-Strain State of Irregular Ribbed Shell-Panels with Cylindrical and Conical Generatrices [in Russian], EK "Bit," Tallin (1989).
G. D. Gavrilenko, S. S. Khalyuk, and A. A. Rudometkin, "Development of a method of designing ribbed shells with irregular reinforcement," in: Structural Mechanics of Ships [in Russian], NKI, Nikolaev (1990), pp. 98–105.
S. K. Godunov, "Numerical solution of boundary-value problems for systems of linear differential equations," Usp. Mat. Nauk,16, No. 3, 171–174 (1961).
A. L. Gol'denveizer, Theory of Elastic Thin Shells, Gostekhizdat, Moscow (1953).
E. S. Greben', "Basic equations of ribbed shallow shells and plates," Raschet Prostr. Konstr.,10, 81–91 (1965).
É. I. Grigolyuk, "Buckling of thin shells beyond the elastic limit," Izv. Akad. Nauk SSSR Otd. Tekh. Nauk, No. 10, 3–20 (1957).
É. I. Grigolyuk, "Theoretical and experimental study of the stability of thin shells beyond the elastic limit," in: Progress in Science: Mechanics. Elasticity and Strength [in Russian], VINITI, Moscow (1966), pp. 7–80.
É. I. Grigolyuk and V. V. Kabanov, "Stability of circular cylindrical shells," in: Itogi Nauki, Mekh. Tverd. Deformiruemykh Tel, Vol. 5, VINITI AN SSSR, Moscow (1969).
É. I. Grigolyuk and V. V. Kabanov, Stability of Shells [in Russian], Nauka, Moscow (1978).
Ya. M. Grigorenko, "Computer solution of problems of the stress state of conical shells of variable stiffness," Computers in Structural Mechanics: Transactions of the First All-Union Conference on the Use of Computers in Structural Mechanics. Leningrad, 1963. Gosstroizdat, Moscow-Leningrad (1966), pp 535–543.
Ya. M. Grigorenko, "Use of numerical methods to design machine parts," Din. Prochn. Mash.,5, 11–17 (1967).
Ya. M. Grigorenko, Isotropic and Anisotropic Shells of Revolution of Variable Stiffness [in Russian], Nauk. Dumka, Kiev (1973).
Ya. M. Grigorenko, "Solution of the problem of the deformation of a long flexible cylindrical shell with variable parameters," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 5, 418–422 (1977).
Ya. M. Grigorenko, "Solution of problems of the theory of shells by the methods of numerical analysis," Prikl. Mekh.,20, No. 10, 3–22 (1984).
Ya. M. Grigorenko and E. A. Abramidze, "One variant of the refined theory of flexible laminated orthotropic shells," Prikl. Mekh.,25, No. 8, 44–52 (1989).
Ya. M. Grigorenko, E. I. Bespalova, A. T. Vasilenko, et al., Numerical Solution of Boundary-Value Problems of the Statics of Orthotropic Laminated Shells of Revolution on an M-220 Computer [in Russian], Nauk. Dumka, Kiev (1971).
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells of Variable Stiffness [in Russian], Vol. 4 of Methods of Shell Design (5 vols.), Nauk. Dumka, Kiev (1981).
Ya. M. Grigorenko and A. T. Vasilenko, Problems of the Statics of Anisotropic Nonuniform Shells [in Russian], Nauka, Moscow (1991).
Ya. M. Grigorenko, A. T. Vasilenko, E. I. Bespalova, et al., Numerical Solution of Boundary-Value Problems of the Statics of Orthotropic Shells with Variable Parameters [in Russian], Nauk. Dumka, Kiev (1975).
Ya. M. Grigorenko, N. D. Draigor, and A. I. Shinkar', "Solution of problems on the stress state of multilayered orthotropic cylindrical shells with variable stiffness in two directions," Sopr. Mater. Teor. Sooruzh.,30, 3–10 (1977).
Ya. M. Grigorenko, A. B. Kitaigorodskii, V. V. Semenova, et al., Design of Orthotropic Laminated Shells of Revolution with Variable Parameters on an ES-Series Computer [in Russian], Nauk. Dumka, Kiev (1980).
Ya. M. Grigorenko and N. N. Kryukov, "Numerical solution of nonlinear boundary-value problems of the theory of flexible circular plates," Vychisl. Prikl. Mat.,41, 46–52 (1980).
Ya. M. Grigorenko and N. N. Kryukov, "One approach to the numerical solution of boundary-value problems of the statics of flexible shells," Dopov. Akad. Nauk Ukr. RSR Ser. A, No. 4, 21–24 (1982).
Ya. M. Grigorenko and N. N. Kryukov, Numerical Solution of Problems of the Statics of Flexible Laminated Shells with Variable Parameters [in Russian], Nauk. Dumka, Kiev (1988).
Ya. M. Grigorenko, n. N. Kryukov, and V. S. Demyanchuk, "Deformation of flexible shells of revolution of variable stiffness," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 4, 42–46 (1983).
Ya. M. Grigorenko, N. N. Kryukov, and T. V. Krizhanovskaya, "Nonlinear deformation of laminated anisotropic shells of revolution under combined thermal and mechanical loads," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 11, 38–41 (1988).
Ya. M. Grigorenko, N. N. Kryukov, and T. V. Krizhanovskaya, "Nonaxisymmetric deformation of flexible conical shells of variable thickness," Prikl. Mekh.,19, No. 51, 29–35 (1983).
Ya. M. Grigorenko and A. P. Mukoed, Solution of Problems of Shell Theory on a Computer [in Russian], Vishcha Shk., Kiev (1979).
Ya. M. Grigorenko and A. P. Mukoed, Solution of Nonlinear Problems of Shell Theory on a Computer [in Russian], Vishcha Shk., Kiev (1983).
Ya. M. Grigorenko and A. M. Timonin, "Solution of nonaxisymmetric nonlinear problems of the statics of shells of revolution with a low shear stiffness," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 10, 30–34 (1981).
Ya. M. Grigorenko and A. M. Timonin, "Numerical solution of nonaxisymmetric problems of the nonlinear theory of laminated shells of revolution," Prikl. Mekh.,18, No. 5, 43–48 (1982).
Ya. M. Grigorenko and A. M. Timonin, "Numerical solution of problems of the deformation of flexible anisotropic plates of complex geometry," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 6, 43–44 (1990).
Ya. M. Grigorenko and O. V. Tumashova, "Stress-strain state of flexible panels with variable geometric parameters," Prikl. Mekh.,25, No. 5, 36–45 (1989).
Ya. M. Grigorenko and V. I. Gulyaev, "Nonlinear problems of shell theory and methods of solving them (survey)," Prikl. Mekh., No. 10, 3–23 (1991).
V. S. Gudramovich, V. P. Gerasimov, and A. F. Demenkov, Limit Analysis of Structural Elements [in Russian], Nauk. Dumka, Kiev (1990).
A. N. Guz', Stability of Elastic Bodies with Finite Strains [in Russian], Nauk. Dumka, Kiev (1973).
A. N. Guz', "Possibility of generalization in the nonlinear theory of small strains," Prikl. Mekh.,20, No. 1, 3–13 (1984).
A. N. Guz', Principles of the Three-Dimensional Theory of Stability of Deformable Bodies [in Russian], Vishcha Shkola, Kiev (1986).
A. N. Guz', I. S. Chernyshenko, Chekhov, et al., Theory of Thin Shells Weakened by Holes [in Russian], Vol. 1 of Methods of Shell Design, Nauk. Dumka, Kiev (1980).
V. I. Gulyaev, V. A. Bazhenov, and E. A. Gotsulyak, Stability of Nonlinear Mechanical Systems [in Russian], Vishcha Shk., Lvov (1982).
V. I. Gulyaev, V. A. Bazhenov, E. A. Gotsulyak, and V. V. Gaidachuk, Design of Shells of Complex Form [in Russian], Budivel'nik, Kiev (1990).
V. I. Gulyaev and G. I. Mel'nichenko, "Modes of supercritical equilibrium of cylindrical and conical shells of elliptical cross section under an axial load," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 5, 60–66 (1976).
M. I. Dlugach and G. D. Gavrilenko, "Realization of conditions for nonambiguity of the displacements in the design of shells with holes," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 3, 220–223 (1975).
M. I. Dlugach and G. D. Gavrilenko, "Design of ribbed cylindrical shells with large rectangular holes by the grid method," Prikl. Mekh.,11, No. 12, 22–30 (1975).
M. I. Duglach and G. D. Gavrilenko, "Stability design of ribbed cylindrical shells with large rectangular holes in a subcritical state with moments," Dokl. Akad. Nauk Ukr. RSR Ser. A, No. 1, 33–37 (1977).
M. I. Dlugach, G. D. Gavrilenko, and P. S. Polyakov, "Theoretical and experimental study of the stress-strain state of ribbed shells with large rectangular holes," Prikl. Mekh.,13, No. 6, 117–120 (1977).
D. G. Donnell, Beams, Plates, and Shells [Russian translation], Nauka, Moscow (1982).
O. Zenkevich, Finite-Element Method in Engineering [Russian translation], Mir, Moscow (1975).
V. V. Kabanov, "Study of the stability of shells by the finite-differences method," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 1, 24–29 (1971).
V. V. Kabanov and L. P. Zheleznov, "Nonlinear deformation of circular cylindrical shells under nonaxisymmetric pressure," in: Design of the Structural Elements of Aircraft [in Russian], Mashinostroenie, Moscow (1982).
A. V. Karmishin, V. A. Lyaskovets, V. I. Myachenkov, and A. N. Frolov, Statics and Dynamics of Thin-Walled Shell Structures [in Russian], Mashinostroenie, Moscow (1975).
A. V. Karmishin, V. A. Lyaskovets, and V. I. Myachenkov, "Stability of eccentrically reinforced shells of revolution," in: Theory of Plates and Shells [in Russian], Nauka, Moscow (1971), pp. 134–141.
A. V. Karmishin and V. I. Myachenkov, "Methods of solving problems of shell stability," Transactions of the VII All-Union Conference on the Theory of Plates and Shells, Nauka, Moscow (1970), pp. 794–807.
A. V. Karmishin, V. I. Maychenkov, A. A. Repin, and A. N. Frolov, "Unified method of solving problems of the stability and vibration of shells of revolution," in: Theory of Plates and Shells [in Russian], Nauka, Moscow (1971), pp. 141–146.
N. I. Karpov, "Stability of a cylindrical shell reinforced by stiffening ribs," Prikl. Mekh.,2, No. 7, 27–33 (1966).
Ya. F. Kayuk, Certain Problems of Parameter Expansion Methods [in Russian], Nauk. Dumka, Kiev (1980).
V. A. Krys'ko, Nonlinear Statics and Dynamics of Nonuniform Shells [in Russian], Saratov. Un-ta, Saratov (1976).
A. D. Kovalenko, Principles of Thermoelasticity [in Russian], Nauk. Dumka, Kiev (1970).
N. V. Kokunov, Principles of the Design of Elastic Shells [in Russian], Vyssh. Shkola, Moscow (1972).
Yu. V. Lipovtsev, "Stability of elastic and viscoelastic shells in the presence of local stresses," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 5, 174–180 (1968).
Yu. V. Lipovtsev and E. V. Shvarts, "Effect of eccentricity of the application of compressive loads on the stability of of a cylindrical shell," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 5, 174–177 (1969).
A. I. Lur'e, Statics of Thin-Walled Elastic Shells, Gostekhizdat, Moscow, Leningrad (1947).
I. S. Malyushin, "Stability and vibration of a cylindrical shell discretely reinforced by a semi-regular system of ribs," Transactions of the X All-Union Conference on the Theory of Plates and Shells. Kutaisi, 1975. Metsniereba, Tableilisi (1975), Vol. 1, pp. 671–679.
V. I. Myachenkov, "Stability of orthotropic shells of revolution under axisymmetric loads," Inzh. Zh. Mekh. Tverd. Tela, No. 1, 106–113 (1968).
V. I. Myachenkov, "Stability of spherical shells under a combination of axial compression, external pressure, and concentrated annular loads," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 6, 133–138 (1970).
V. I. Myachenkov, "Stability of cylindrical shells under the influence of axisymmetric transverse pressure," Prikl. Mekh., No. 1, 27–33 (1970).
V. I. Myachenkov, "Stability of cylindrical shells under the combined influence of axial compression and axisymmetric local loads," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 5, 178–181 (1969).
V. I. Maychenkov and I. V. Grigor'ev, Computer Design of Shell Structures: Handbook [in Russian], Mashinostroenie, Moscow (1981).
V. I. Maychenkov and V. P. Mal'tsev, Methods and Algorithms for the Design of Three-Dimensional Structures on a ES-Series Computer [in Russian], Mashinostroenie, Moscow (1984).
V. I. Myachenkov and L. A. Pakhomova, "Local stability of cylindrical shells during heating," Inzh. Zh. Mekh. Tverd. Tela, No. 2, 130–134 (1968).
V. I. Myachenkov and L. A. Pakhomova, "Stability of cylindrical shells under concentrated annular loads," Inzh. Zh. Mekh. Tverd. Tela, No. 6, 143–147 (1968).
V. I. Myachenkov and A. A. Repin, "Stability of a cylindrical shell under the combined influence of axial compression and heating," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 4, 166–168 (1970).
V. I. Myachenkov and P. F. Shablii, "Stability of spherical shells with local defects," Prikl. Mekh.,7, No. 8, 128–131 (1971).
Kh. M. Mushtari and K. Z. Galimov, Nonlinear Theory of Elastic Shells [in Russian], Tatknigoizdat, Kazan' (1957).
V. V. Novozhilov, Theory of Thin Shells [in Russian], Sudostroenie, Leningrad (1962).
P. M. Ogibalov and M. A. Koltunov, Shells and Plates [in Russian], Izd-vo Mosk. Un-ta, Moscow (1969).
V. A. Postnov, V. S. Korneev, and N. G. Slezina, "Design of thin shells of revolution of arbitrary form by the finiteelement method," Stroit. Mekh. Korablya,128, 5–18 (1970).
V. A. Postnov and L. A. Rozin, "Finite-element method in the theory of plates and shells," Transactions of the IX All-Union Conference on the Theory of Plates and Shells, Sudostroenie, Leningrad (1975), pp. 292–296.
V. M. Myachenkov, V. P. Mal'tsev, V. P. Maidoroda, et al., in: Design of Machine Elements by the Finite-Element Method: Handbook [in Russian], Mashinostroenie, Moscow (1989).
V. N. Revutskii, "Stability of flawed ribbed spherical shells," Submitted to VINITI 29.06.89. No. 4287–1989 (1989).
L. A. Rozin and L. B. Grimze, "Design of arbitrary shells of revolution by the splitting method on a computer," Issled. Upr. Plast., No. 5, 70–118 (1966).
I. V. Svirskii, Methods of the Bubnov—Galerkin Type and Successive Approximations [in Russian], Nauka, Moscow (1968).
P. A. Sokolov, "Stability of a thin cylindrical shell reinforced by circular elastic ribs and subjected to transverse and longitudinal loads," Prikl. Mat. Mekh.,1, No. 2, 256–281 (1933).
S. P. Timoshenko and S. A. Woinowsky-Krieger, Plates and Shells [Russian translation], Nauka, Moscow (1971).
S. P. Timoshenko, Stability of Rods, Plates, and Shells [in Russian], Nauka, Moscow (1971).
J. M. T. Thompson and R. Gaffari, "Complex dynamic behavior of bilinear systems: bifurcative instability leading to chaos," in: Loss of Stability and Buckling of Structures: Theory and Practice [Russian translation], Nauka, Moscow (1991), pp. 132–144.
J. M. T. Thompson, Instability and Catastrophe in Science and Engineering [Russian translation], Mir, Moscow (1985).
A. P. Filin, Elements of the Theory of Shells, Stroizdat, Leningrad (1975).
Fine and Sekler, Thin-Walled Shell Structures: Theory, Experiment, and Design [Russian translation], Mashinostroenie, Moscow (1980).
K. F. Chernykh, Linear Theory of Shells [in Russian], Izd-vo LGU, Leningrad (1962)–(1964), Pts. 1 and 2.
L. Euler, "Method of finding curves having the properties of a minimum or maximum or solving an isoperimetric problem in the broadest sense," in: Classics of Natural Science (a series). Supplement 1: Elastic Curves [in Russian], ONTI, Moscow, Leningrad (1934).
K. P. Ellinas, J. G. A. Croll, "General elastoplastic loss of stability by ring-reinforced cylindrical shells," in: Loss of Stability and Buckling of Structures: Theory and Practice [in Russian], Nauka, Moscow (1991), pp. 81–93.
B. O. Almroth and D. Bushnell, "Computer analysis of various shells of revolution," AIAA J.,6, No. 10, 1848–1855 (1968).
J. Arbocz and J. M. A. M. Hol, "Koiter's stability theory in a computerized engineering (CAE) environment," Int. J. Solids Struct.,26, No. 9/10, 945–973 (1990).
J. Arbocz and J. M. A. M. Hol, "Collapse of axially compressed cylindrical shells with random imperfections," AIAA J.,29, No. 12, 2247–2256 (1991).
J. Arbocz, Shell Stability Analysis: Theory and Practice. Proceedings of the IUTAM Symposium on Collapse, the Buckling of Structures in Theory and Practice, J. M. T. Thompson and G. W. Hunt (eds.), Cambridge University Press, New York (1983), pp. 43–74.
J. Arbocz, The Imperfection Data Bank, a Means to Obtain Realistic Buckling Loads, Proceedings, Buckling of Shells. A State-of-the-Art Colloquium, E. Ramm (ed.), Springer-Verlag, Berlin (1982), pp. 537–567.
C. D. Babcock, "Shell stability," J. Appl. Mech.,50, 935–940 (1983).
D. Bushnell, "Symmetric and nonsymmetric buckling of finitely deformed eccentrically stiffened shells of revolution," AIAA J.,5, No. 8, 1455–1462 (1967).
D. Bushnell, "BOSOR-5 — program for buckling of elastic-plastic complex shells of revolution including large deflections and creep," Comput. Struct.,6, 221–239 (1976).
D. Bushnell, "PANDA-2 — program for minimum weight design of stiffened, composite, locally buckled panels," Comput. Struct.,25, No. 4, 469–505 (1987).
D. Bushnell, "Theoretical basis of the PANDA computer program for preliminary design of stiffened panels under combined in-plane loads," Comput. Struct.,27, No. 4, 541–563 (1987).
J. G. A. Croll and C. P. Ellinas, "A design formulation for axisymmetric collapse of stiffened and unstiffned cylinders," Trans. ASME: J. Energy Resource Technol.,107, No. 3, 350–355 (1985).
C. P. Ellinas, J. G. A. Croll, and R. C. Batista, "Overall buckling of stringer-stiffened cylinders," Proc. Inst. Civ. Eng.,71, Pt. 2, 479–512 (1981).
C. P. Ellinas and J. G. A. Croll, "Overall buckling of ring-stiffened cylinders," Proc. Inst. Civ. Eng.,71, Pt. 2, 637–661 (1981).
I. Elishakoff and J. Arbocz, "Reliability of axially compressed cylindrical shells with general nonsymmetric imperfections," J. Appl. Mech.,52, 122–128 (1985).
N. J. Hoff, "Buckling of thin shells," Proc. of an Aerospace Symp. of Distinguished Lecturers in Honor of Theodore von Karman on his 80th Anniversary. Inst. of Aerosp. Sci., New York (1961), pp. 1–42.
J. W. Hutchinson, "Plastic buckling," Adv. Appl. Mech.,14, 67–143 (1974).
J. W. Hutchinson, "Post-bifurcation behavior in the plastic range," J. Mech. Phys. Solids,21, 163–190 (1973).
J. W. Hutchinson and W. T. Koiter, "Postbuckling theory," Appl. Mech. Rev.,23, 1353–1366 (1970).
W. T. Koiter, "Current trends in the theory of buckling," Buckling Structure, Berlin (1976), pp. 1–16.
R. Lorenz, "Die nicht achsensymmetrische knibkung durationnwandiger Hohlzylinder." Phys. Z.,12, No. 7, 241–260 (1911).
H. Ohira, "Local buckling theory of axially compressed cylindrical shells," Proc. Eleventh Japan National Congress of Applied Mechanics (1961), pp. 37–40.
E. Riks, C. C. Rankin, and F. A. Brogan, The Numerical Simulation of the Collapse Process of Axially Compressed Cylindrical Shells with Measured Imperfections. Report LR. — 705, pp. 1–9.
J. Scogh, P. Stern, and F. Brogan, "Instability analysis of Sklylab structure," J. Comput. Struct.,3, 1219–1240 (1973).
M. J. Sewell, A Survey of Plastic Buckling. Study No. 6, S. T. Ariarathman et al. (eds.), Solid Mechanics Division, University of Waterloo, Ontario, Canada (1972), pp. 85–197.
J. Singer and A. Rosen, "The influence of boundary conditions on the buckling of stiffened cylindrical shells," Proc. IUTAM Symp. Buckling of Structures, Harvard Univ., Cambridge, Mass., June 1974. Springer-Verlag, Berlin (1976), pp. 227–250.
R. Southwell, "On the collapse of tubes by external pressure. Parts I, II, III," Philos. Mag., Ser. 6,25, No. 149, 687–697;26, No. 153, 502–510;29, No. 169, 67–76 (1913).
J. M. T. Thompson, "Basic principles in the general theory of elastic stability," J. Mech. Phys. Solids,11, 13–20 (1963).
J. M. T. Thompson, "Discrete branching points in the general theory of elastic stability," J. Mech. Phys. Solids,13, 295–310 (1965).
J. M. T. Thompson, "Catastrophe in mechanics: progress or digression," J. Struct. Mech.,10(2, 162–175 (1982).
J. M. T. Thompson, "A general theory for the equilibrium and stability of discrete conservative systems," Z. Angew. Math. Phys.,20, 797–846 (1969).
J. M. T. Thompson and G. W. Hunt, A General Theory of Elastic Stability, Wiley, London (1973).
J. M. T. Thompsonn and G. W. Hunt, "Towards a unified bifurcation theory," Z. Angew. Math. Phys.,26, 581–604 (1975).
T.-S. Wang and Y. Lin, "Stability of discretely stringer-stiffened shells," AIAA J.,11, No. 6, 810–814 (1973).
V. I. Weingarten, E. J. Morgan, and P. Seide, "Elastic stability of thin-walled cylindrical and conical shells under axial compression," AIAA J., No. 3, 500–505 (1965).
Additional information
S. P. Timoshenko Institute of Mechanics, National Academy of Sciences of Ukraine, Kiev. Translated from Prikladnaya Mekhanika, Vol. 31, No. 7, pp. 3–25, July, 1995.
Rights and permissions
About this article
Cite this article
Gavrilenko, G.D. Stability of smooth and ribbed shells of revolution in a nonuniform stress-strain state (survey). Int Appl Mech 31, 501–520 (1995). https://doi.org/10.1007/BF00846784
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00846784