This is a preview of subscription content, log in via an institution to check access.
Literature cited
S. S. Ordan'yan and B. Yu. Yuriditskii, “Possibility of employing TiB2 as a base of cutting materials,” in: Physical Chemistry and Technology of Silicate and Inorganic Materials [in Russian], Leningrad Technological Institute (1978), pp. 108–113.
B. Yu. Yuriditskii and S. S. Ordanrdyan, “Effect of the hardness of a material on ball wear in vibratory milling,” in: Physical Chemistry and Technology of Silicate and Inorganic Materials [in Russian], Leningrad Technological Institute (1979), pp. 39–44.
A. E. Kravchik, V. S. Neshpor, et al., “Plastic strain of particles of titanium carbide and zirconium carbide powders subjected to vibratory milling,” Poroshk. Metall., No. 12, 30–36 (1976).
R. A. Andrievskii, A. G. Lanin, and G. A. Rymashevskii, Strength of Refractory Compounds [in Russian], Metallurgiya, Moscow (1974).
H. Hascke, H. Nowotny, et al., “Untersuchungen in den Dreistoffen (Mo, W)-(Fe, Co, Ni)-B,” Monatsh. Chem.,97, No. 5, 1459–1468 (1966).
N. N. Sereda and M. S. Koval'chenko, “Annular structure of cermets based on titanium carbide with various metallic binders,” Transactions of the Third International Conference on Powder Metallurgy in Czechoslovakia, Karlovy Vary (1970), pp. 184–195.
P. O. Snell, “The effect of carbon content and sintering temperature on structure formation and particles of TiC-24% Mo-15% Ni alloy,” Planseeber. Pulvermetall.,22, No. 4, 91–106 (1974).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 4(232), pp. 32–35, April, 1982.
Rights and permissions
About this article
Cite this article
Yuriditskii, B.Y., Pesin, V.A. & Ordan'yan, S.S. Change in the fine structure of titanium diboride occurring during the sintering of A TiB2-Fe(Mo) cermet. Powder Metall Met Ceram 21, 280–282 (1982). https://doi.org/10.1007/BF00806760
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00806760