References
L. T. DRZAL, in “Advances in polymer science”, Vol. 80: “Epoxy resins and composites IV”, edited by K. Dusek (Springer-Verlag, Berlin, 1986) p. 1.
M. J. RICH and L. T. DRZAL,J. Reinf. Plast. Compos. 7 (1988) 145.
J. F. MANDELL, J. H. CHEN and F. J. McGARRY,Int. J. Adhesion Adhesives 1 (1980) 40.
N. H. LADIZESKY and I. M. WARD,J. Mater. Sci. 18 (1983) 533.
M. J. PITKETHLY and J. B. DOBLE,Composites 21 (1990) 389.
M. R. PIGGOTT,Compos. Sci. Technol. 30 (1987) 295.
B. MILLER, P. MURI and L. RUBENFELD, ibid.28 (1987) 17.
D. K. OWENS,J. Appl. Polym. Sci. 19 (1975) 265.
G. A. GEORGE and H. A. WILLIS,High Perform. Polym. 1 (1990) 335.
N. H. LADIZESKY and I. M. WARD,Compos. Sci. Technol. 26 (1986) 129.
M. NARDIN and I. M. WARD,Mater. Sci. Technol. 3 (1987) 814.
D. A. BIRO, P. McLEAN and Y. DESLANDES,Polym. Engng. Sci. 37 (1991) 1250.
D. A. BIRO, G. PLEIZIER and Y. DESLANDES,Compos. Sci. Technol. submitted.
K. KUPPER and P. SCHWARTZ,J. Adhes. Sci. Technol. 5 (1991) 165.
H. LEE and K. NEVILLE, in “Handbook of epoxy resins” (McGraw-Hill, New York, 1982) Ch. 5.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Biro, D.A., Pleizier, G. & Deslandes, Y. Application of the microbond technique Part III Effects of plasma treatment on the ultra-high modulus polyethylene fibre-expoxy interface. J Mater Sci Lett 11, 698–701 (1992). https://doi.org/10.1007/BF00728911
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00728911