References
S. J. HARRIS, B. NOBLE and K. KINSDALE, in “Alluminium-Lithium Alloys II”, edited by T. H. Sanders, Jr and E. A. Starke, Jr (TMS-AIME, New York, 1984) p. 219.
R. S. PATHANIA and D. TROMANS,Met. Trans. A12 (1981) 607.
N. J. H. HOLROYD, A. GRAY, G. M. SCAMANS and R. HERRMANN, in “Aluminium-Lithium Alloys III”, edited by C. Baker, P. J. Gregson, S. J. Harris and C. J. Peel (The Institute of Metals, London, 1986) p. 310.
B. NOBLE and G. E. THOMPSON,Met. Sci. J. 5 (1971) 114.
M. TAHERI, J. ALBRECHT, I. M. BERNSTEIN and A. W. THOMPSON,Scripta Metall. 13 (1979) 871.
J. K. TIEN, A. W. THOMPSON, I. M. BERNSTEIN and R. J. RICHARDS,Met. Trans. A7 (1976) 821.
J. ALBRECHT, A. W. THOMPSON and I. M. BERNSTEIN,A10 (1979) 1759.
M. R. LOUTHAN, JR, G. R. CASKEY, JR, J. A. DONOVAN and D. E. RAWL, JR,Mater. Sci. Eng. 10 (1972) 357.
J.-K. CHOI and S.-I. PYUN,J. Mater. Sci. in press.
S.-M. LEE and S.-I. PYUN, in preparation.
J. L. NELSON and E. N. PUGH,Met. Trans. A6 (1975) 1459.
G. H. KOCH,Corrosion-NACE 35 (1979) 73.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lee, S.M., Pyun, S.I. Effects of microstructure and strain rate on hydrogen-assisted cracking of Al-1.9% Li alloy. J Mater Sci Lett 9, 1247–1250 (1990). https://doi.org/10.1007/BF00726509
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00726509