Abstract
The construction of thermodynamic stability diagrams for the Fe-Cr-Al system is discussed. The constructed diagrams are used to predict materials behavior at coal gasifier oxygen and sulfur potentials. Experiments are run to compare predicted results with experimental observations. Powder mixtures of FeS, Cr2O3, and Al2O3 are used to observe the formation of the iron-chromia and iron-alumina spinels. The spinels are observed at both 871 and 982° C. The formation of an alumina spinel is observed only on the Fe-10Al alloy, whereas no iron-chromia spinel is found on the Fe-Al-Cr alloys.
Similar content being viewed by others
References
R. Rapp,Proceedings of the Workshop on Materials Problems and Research Opportunities in Coal Conversion, Ohio State University, Vol. II (NSF, 1974), pp. 313–334.
Peter L. Hammings and R. A. Perkins, “Thermodynamic Phase Stability Diagrams for the Analysis of Corrosion Reactions in Coal Gasification/Combination Atmospheres,” Lockheed Missiles and Space Company, LMSC-D558238, prepared for Electric Power Research Institute, 1977.
JANAF Thermochemical Tables, 2nd ed., NSRAS-NBS 37 (1971).
K. T. Jacob and C. B. Alcock,Metall. Trans. 6B, 215 (1975).
J. C. Chan, C. B. Alcock, and K. T. Jacob,Can. Metall. Q. 12, 439 (1973).
D. J. Young, W. W. Smeltzer, and J. S. Kirkaldy,J. Electrochem. Soc. 120, 1221 (1973).
F. N. Mazandarany and R. D. Pehlke,J. Electrochem. Soc. 121, 711 (1974).
H. C. Ko, J. M. Stuve, and R. R. Brown, Bureau of Mines RI-8203 (1976).
A. McNab,Proceedings of the Workshop on Materials Problems and Research Opportunities in Coal Conversion, Ohio State University (NSF, 1974), pp. 33–48.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gordon, B.A., Worrell, W. & Nagarajan, V. Thermodynamic predictions of the behavior of Fe-Cr-Al alloys in coal gasifier environments. Oxid Met 13, 13–23 (1979). https://doi.org/10.1007/BF00715868
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00715868