References
K. Hoffman, “An introduction to measurements using strain gages” (Hottinger Baldwin Messtechnik GmbH, Darmstadt, 1989).
N. White andA. Cranny,Hybrid Circuits 12 (1987) 32.
S. Satoh, Y. Takatsuji, F. Katoh and H. Hirata, in Proceedings of the 1991 International Symposium on Microelectronics ISHM-91, Orlando, 1991, p. 148.
O. Abe andY. Taketa, in Proceedings of the 1988 International Symposium on Microelectronics ISHM-88, Seattle, 1988, p. 217.
A. Cattaneo, R. Dell'acqua, G. Dell'orto, L. Pirozzi andC. Canali, in Proceedings of the 1980 International Symposium on Microelectronics ISHM-80, New York, 1980, p. 221.
S. Chitale, C. Huang andM. Stein,Hybrid Circuits Technol. 6 (1989).
A. G. Bishay, D. A. Abdelhady andA. M. Darwish,J. Mater. Sci. Mater. Elec. 3 (1992) 195.
M. Prudenziati andB. Morten,Hybrid Circuits 10 (1986) 20.
ESL, High gauge factor resistor data sheet, D-3414-A/B, 9008 A.
C. Song, D. V. Kerns, jr, J. L. Davidson, w. kang ands. kerns, in IEEE Proceedings of SoutheastCon 91 Conference, Vol. 2, Williamsburg, 1991, p. 1106.
J. E. Bauerle,J. Phys. Chem. Solids 30 (1969) 2657.
R. Dell'acqua,Hybrid Circuits 12 (1987) 11.
F. Muller andM. Wolf,Active Passive Elec. Components 13 (1988) 1.
A. Le Corre, N. Nicoloso, J. Maier, J. C. niepce andM. Maglione, in Proceedings of the 3rd International Conference on Electroceramics, Vol. II, Maubege, 1992, p. D4.1.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hrovat, M., Holc, J., Belavič, D. et al. An evaluation of some commercial thick film resistor materials for strain gauges. J Mater Sci Lett 13, 992–995 (1994). https://doi.org/10.1007/BF00701448
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00701448