Abstract
Micron-sized monodispersed cross-linked polymer particles having one hollow in the inside were produced by seeded polymerization for the dispersion of (toluene/divinylbenzene)-swollen PS particles prepared utilizing the dynamic swelling method which the authors proposed. In order to control the hollow size, the weight ratio of toluene/PS was changed in the range of 5∼20. The hollow size increased with an increase in the weight ratio. Even if benzene and xylene were used in place of toluene, similar hollow particles were produced, though the hollow size was affected by their solubility in water.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ugelstad J (1978) Makromol Chem 179:815
Ugelstad J, Kaggerud KH, Hansen FK, Berge A (1979) Makromol Chem 180:737
Ugelstad J, Mørk PC, Kaggerud KH, Ellingsen T, Berge A (1980) Adv Colloid Interface Sci 13:101
Vanderhoff JW et al. (1984) J Dispersion Sci Tech 5 (3&4):231
Corner T (1981) Colloids and Surfaces 3:119
Almog Y, Reich S, Levy M (1982) Br Polym J 14:131
Okubo M, Ikegami K, Yamamoto Y (1989) Colloid Polym Sci 267:193
Okubo M, Katayama Y, Yamamoto Y (1991) Colloid Polym Sci 269:217
Yamamoto Y, Okubo M, Iwasaki Y (1991) Colloid Polym Sci 269:1126
Okubo M, Nakagawa T (1994) Colloid Polym Sci 272:530
Okubo M, Shiozaki M, Tsujihiro M, Tsukuda Y (1991) Colloid Polym Sci 269:222
Okubo M, Shiozaki M (1993) Polymer International 30:469
Okubo M, Minami H, Yamashita T (1996) Makromol Chem Macromol Symp 101:509
Author information
Authors and Affiliations
Additional information
Part CLIII of the series “Studies on Suspension and Emulsion”
Rights and permissions
About this article
Cite this article
Okubo, M., Minami, H. Control of hollow size of micron-sized monodispersed polymer particles having a hollow structure. Colloid Polym Sci 274, 433–438 (1996). https://doi.org/10.1007/BF00652465
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00652465