Abstract
A review of the literature is made regarding the oxidation and hot-corrosion resistance and general behavior of superalloy coatings. Although coating procedures and testing are reviewed, the effect of the coating or coating cycle on mechanical properties and environmental stability is emphasized. Electron microprobe, metallography, and X-ray diffraction phase analyses are discussed in relation to proposed failure mechanisms.
Similar content being viewed by others
References
C.T. Sims, A contemporary view of nickel-base superalloys,J. Metals 18 (October 1966).
C. H. Lund and H. J. Wagner, Oxidation of nickel- and cobalt-base superalloys, DMIC Report 214, March 1965.
G. E. Wasielewski, Oxidation of nickel and cobalt superalloys, General Electric Report R68AEG141, January 1968.
G. J. Wile, Superalloys for aerospace application,J. Metals 15 (September 1963).
L. D. Graham, J. D. Gadd, and R. J. Quigg, Hot corrosion behavior of coated and uncoated superalloys,Hot Corrosion Problems Associated with Gas Turbines, ASTM Special Technical Report No. 421 (September 1967).
A. U. Seybolt and A. M. Beltran, High temperature sulfur-oxygen corrosion of nickel and cobalt,Hot Corrosion Problems Associated with Gas Turbines, ASTM Special Technical Report No. 421 (September 1967).
R. W. Hardt, J. R. Gambino, and P. A. Bergman, Marine hot corrosion mechanism studies,Hot Corrosion Problems Associated with Gas Turbines, ASTM Special Technical Report No. 421 (September 1967).
R. S. Bartocci, Behavior of high-temperature coatings for gas turbines engine,Hot Corrosion Problems Associated with Gas Turbines, ASTM Special Technical Report No. 421 (September 1967).
P. E. Hamilton, K. H. Ryan, and E. S. Nichols, Nickel-base alloys and their relationship to hot corrosive environments,Hot Corrosion Problems Associated with Gas Turbines, ASTM Special Technical Report No. 421 (September 1967).
G. Llewelyn, Protection of nickel-base alloys against sulfur corrosion by pack aluminizing,Hot Corrosion Problems Associated with Gas Turbines, ASTM Special Technical Report No. 421 (September 1967).
P. A. Bergman, A. M. Beltran, and C. T. Sims, Development of hot corrosion resistant alloy for Marine gas turbine service. Final Summary Report to MEL
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lindblad, N.R. A review of the behavior of aluminide-coated superalloys. Oxid Met 1, 143–170 (1969). https://doi.org/10.1007/BF00609929
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00609929