Abstract
Using a computer lattice model developed previously, we show that a fibre coating decreases the stress concentration and improves the load carrying capabilities of a broken fibre embedded in a poorly bonded matrix. The optimum fibre coating must have a modulus 1 to 2 times the matrix modulus and a thickness of about 100 nm. Examples are shown in which these fibre coating characteristics can lead to a 400% increase in the load carrying capabilities of a fibre.
Similar content being viewed by others
References
P. S. Theocaris, J. Appl. Polym. Sci. 30 (1985) 621.
Y. Termonia, J. Mater. Sci. 22 (1987) 504.
Idem, ibid. 22 (1987) 1733.
T. F. MacLaughlin and R. M. Barker, Exper. Mechan. 12 (1972) 178.
R. A. Larder and C. W. Beadle, J. Comp. Mater. 10 (1976) 21.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Termonia, Y. Fibre coating as a means to compensate for poor adhesion in fibre-reinforced materials. J Mater Sci 25, 103–106 (1990). https://doi.org/10.1007/BF00544192
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00544192