Abstract
The dynamic fracture processes of hot-extruded SiCw-6061 Al composite were observed using scanning electron microscopy (SEM). The effect of the off-axis angle on the strength and the fracture mechanism of the composite was studied in detail. On the basis of the SEM observations, two tensile fracture models, namely the brittle fracture model and the shear fracture model, are discussed.
Similar content being viewed by others
References
T. G. Nieh, Met. Trans. 15A (1984) 139.
A. P. Divecha, S. G. Fishman and S. D. Karmarkar, J. Met. 33 (1981) 12.
V. D. Azzi and S. W. Tsai, Exp. Mech. 5 (1965) 283.
L. Cao, C. P. Jiang, C. K. Yao and T. C. Lei, Acta. Metall. Sinica, 25 (1989) B179.
R. G. Zhang and S. B. Xu, Shanghai Mechanics 11 (1981) 55–64 (in Chinese).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ma, Z.Y., Liu, J. & Yao, C.K. Fracture mechanism in a SiCw-6061 Al composite. J Mater Sci 26, 1971–1976 (1991). https://doi.org/10.1007/BF00543631
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00543631