Zusammenfassung
Zur Isolierung der intermetallischen Verbindungen aus den entsprechenden binären Legierungen wird die Probe mehrere Stunden bis Tage unter Rühren mit einer methanolischen Lösung von Benzoesäure (20%), Oxin (5%), Chloroform (20%) und Natriumhydroxid (0,02%) behandelt. Hierbei wird die Matrix aufgelöst und die intermetallischen Verbindungen bleiben zurück.
Summary
For the isolation of the intermetallic compounds Al2Cu, Al12Mg17, Al3Fe, Al9Co2 and Al3Ni in their binary alloys a new method is proposed: Sample alloy particles are placed in a flask with a methanolic solution of benzoic acid (20% wt.), oxine (5% wt.), chloroform (20% vol.) and sodium hydroxide (0.02% wt.). After sufficient time of agitation, the intermetallic compounds remain quantitatively in the solution.
References
Cron, C. J., Payer, J. H., Staehle, R. W.: Corrosion 27, 1 (1971).
Horstmann, D., Malissa, H.: Arch. Eisenhüttenwes. 27, 423 (1956).
Ilschner-Gensch, C.: Arch. Eisenhüttenwes. 31, 79 (1960).
Koch, W., Sundermann, H.: Arch. Eisenhüttenwes. 28, 557 (1957).
Pickering, H. W., Byrne, P. J.: J. Electrochem. Soc. 118, 209 (1971).
Raynor, G. V., Hume-Rothery, W.: J. Inst. Metals 69, 415 (1943).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Honda, F., Hirokawa, K. Isolation of the intermetallic compounds Al2Cu, Al12Mg17 Al3Fe, Al9Co2 and Al3Ni in binary aluminium alloys by application of an organic solvent. Z. Anal. Chem. 262, 170–179 (1972). https://doi.org/10.1007/BF00437635
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00437635