Abstract
The temperature of a phase transition can be determined from the point where the DTA curve departs from the base line or from the “onset” point which can be found by an easy construction. Temperatures determined by the departure point are strongly influenced by individual interpretation, while temperatures determined by the “onset”-point procedure show a systematic deviation. This deviation becomes negligible if the heating rate is slow.
Zusammenfassung
Die Temperatur einer Phasenumwandlung, verfolgt mit der Differentialthermoanalyse, kann aus der Abweichung der DTA-Kurve von der Basislinie oder aus dem einfach zu konstruierenden „onset“-Punkt bestimmt werden. Ein Vergleich beider Verfahren zeigt, daß das Verfahren, das auf dem „onset“-Punkt basiert, zwar mit einem systematischen Fehler behaftet ist, aber frei von individuellen Interpretationen beim Auswerten ist. Der systematische Fehler läßt sich klein halten, indem man möglichst langsam aufheizt, bzw. abkühlt.
Similar content being viewed by others
Literatur
McAdie, H. G.: Requirements and realization of thermal analysis standards, temperature standards for DTA, in [3], p. 591.
Mackenzie R. C.: Differential thermal analysis, vol. I, p. 34, London-New York: Acad. Press 1970.
Wiedemann, H. G.: Thermal analysis, Proc. 3rd Int. Conf. Therm. Anal., Vol. 1. Basel-Stuttgart: Birkhäuser 1972
Willmann, G.: diese Z. 266, 21 (1973)
Author information
Authors and Affiliations
Additional information
Teil I: diese Z. 266, 21 (1973).
Rights and permissions
About this article
Cite this article
Willmann, G. Bestimmung einer Phasenumwandlungstemperatur mit der Differentialthermoanalyse. II. Z. Anal. Chem. 269, 257–259 (1974). https://doi.org/10.1007/BF00430573
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00430573