Summary
The aim of the study was to calculate the magnitude of the instantaneous muscular power output at the hip, knee and ankle joints during ergometer cycling at different work loads and speeds. Six healthy subjects pedalled a weight-braked cycle ergometer at 0, 120 and 240 W at a constant speed of 60 rpm. The subjects also pedalled at 40, 60, 80 and 100 rpm against the same resistance, giving power outputs of 80, 120, 160 and 200 W respectively. The subjects were filmed with a cine-film camera, and pedal reaction forces were recorded from a force transducer mounted in the pedal. The muscular work for the hip, knee and ankle joint muscles was calculated using a model based upon dynamic mechanics and described elsewhere. The total work during one pedal revolution significantly increased with increased work load but did not increase with increased pedalling rate at the same braking force. The relative proportions of total positive work at the hip, knee and ankle joints were also calculated. Hip and ankle extension work proportionally decreased with increased work load. Pedalling rate did not change the relative proportion of total work at the different joints.
Similar content being viewed by others
References
Bal MER, Thompson EM, McIntosh EM, Taylor CM, MacLeod G (1953) Mechanical efficiency in cycling of girls six to fourteen years of age. J Appl Physiol 6:185–188
Benedict FG, Cathcart P (1913) Muscular work. Carnegie Institute of Washington, publication no: 187
Bigland-Ritchie R, Graichen H, Woods JJ (1973) A variablespeed motorized bicycle ergometer for positive and negative work exericse. J Appl Physiol 35:739–740
Bratt Å, Ericson MO (1985) Biomechanical model for calculation of joint loads during ergometer cycling. TRITA-MEK, 85–05
Dempster WT (1955) Space requirements of seated operator. Wright Patterson Air Force Base WADC-TR-55-159
Dickinson S (1929) The efficiency of bicycle-pedalling, as affected by speed and load. J Physiol 67:242–255
Ericson MO (1986) On the biomechanics of cycling. A study of joint and muscle load during exercise on the bicycle ergometer. Scand J Rehab Med [Suppl 16]
Ericson MO, Ekholm J, Svensson O, Nisell R (1985a) The forces on ankle joint structures during ergometer cycling. Foot Ankle 6:135–142
Ericson MO, Nisell R, Arborelius UP, Ekholm J (1985b) Muscular activity during ergometer cycling. Scand J Rehab Med 17:53–61
Ericson MO, Bratt Å, Nisell R, Arborelius UP, Ekholm J (1986) Power output and work in different muscle groups during ergometer cylcing. Eur J Appl Physiol 55:229–235
Gaesser GA, Brooks GA (1975) Muscular efficiency during steady-rate exercise: effects of speed and work rate. J Appl Physiol 38:1132–1139
Garry RC, Wishart GM (1931) On the existence of a most efficient speed in bicycle pedalling, and the problem of determining human muscular efficiency. J Physiol 72:425–437
Hull ML, Jorge M (1985) A method for biomechanical analysis of bicycle pedalling. J Biomech 18:631–644
Kaneko M, Yamazaki T (1978) Internal mechanical work due to velocity changes of the limb in working on a bicycle ergometer. In: Asmussen E, Jörgensen K (eds) Biomechanics VI-A, international series on biomechanics, University Park Press, Baltimore, pp 86–92
Löllgen H, Graham T, Sjögaard G (1980) Muscle metabolites, force, and perceived exertion bicycling at varying pedal rates. Med Sci Sports 12:345–351
McCann D, Gliner JA (1982) Preferred and imposed work rates: tempo variability, and mechanical efficiency. Ergonomics 25:255–258
Nordeen KS, Cavanagh PR (1975) Simulation of lower limb kinematics during cycling. In: Komi PA (ed) Biomechanics V-B, international series on biomechanics, University Park Press, Baltimore, pp 26–33
Wells R, Morrisey M, Hughson R (1986) Internal work and physiological responses during concentric and eccentric cycle ergometry. Eur J Appl Physiol 55:295–301
Whipp BJ, Wasserman K (1967) Efficiency of muscular work. J Appl Physiol 26:644–648
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ericson, M.O. Mechanical muscular power output and work during ergometer cycling at different work loads and speeds. Europ. J. Appl. Physiol. 57, 382–387 (1988). https://doi.org/10.1007/BF00417980
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00417980