Abstract
Hydrothermal melting reactions in the system NaAlSiO4-SiO2-H2O have been extended into the coesite stability field using piston-cylinder apparatus, and the quartz-coesite transition has been bracketed at 735° (28.0±0.9 Kb) and at 800° C (28.15±0.9 Kb) in the presence of a silicate liquid phase; this provided favorable kinetic conditions. The results agree closely with previous piston-cylinder determinations employing a correction for pressure loss due to friction. Consideration of previous calibration and hysteresis experiments leads to the conclusion that despite its potential utility, the quartz-coesite transition can not be confidently used as a calibrant for piston-cylinder apparatus until the question of whether or not to apply a friction correction has been resolved.
Similar content being viewed by others
References
Bell, P. M., G. Simmons, and J. F. Hays: Shearing squeezer experiments with quartz and coesite. Carnegie Inst. Wash. Year Bk. 64, 141–144 (1965).
Birch, F., and P. Lecomte: Temperature-pressure plane for albite composition. Am. J. Sci. 258, 209–217 (1960).
Boettcher, A. L., and P. J. Wyllie: Hydrothermal melting reactions in the system NaAlSiO4-SiO2-H2O at pressure above 10 kbs: Jadeite stability. Program Ann. Meeting Geol. Soc. Am. 1967, 17 (1967).
- - The calcite-aragonite transition measured in the system CaO-CO2-H2O. J. Geol. (in press) (1968).
Boyd, F. R.: Geological aspects of high-pressure research. Science 145, 13–20 (1964).
—, P. M. Bell, J. L. England, and M. C. Gilbert: Pressure measurements in single-stage apparatus. Carnegie Inst. Wash. Year Bk. 65, 410–414 (1967).
—, and J. L. England: Apparatus for phase-equilibrium measurements at pressures up to 50 kilobars and temperatures up to 1750° C. J. Geophys. Res. 65, 741–748 (1960a).
— —: The quartz-coesite transition. J. Geophys. Res. 65, 749–756 (1960b).
— —: Effect of pressure on the melting of diopside, CaMgSi2O6, and albite, NaAlSi3O8, in the range up to 50 kilobars. J. Geophys. Res. 68, 311–323 (1963).
Clark, S. P.: Effect of pressure on the melting points of eight alkali halides. J. Chem. Phys. 31, 1526–1531 (1959).
Dachille, F. D., and R. Roy: High pressure region of the silica isotypes. Z. Krist. 111, 451–461 (1959).
Green, T. H., A. E. Ringwood, and A. Major: Friction effects and pressure calibration in a piston-cylinder apparatus at high pressure and temperature. J. Geophys. Res. 71, 3589–3594 (1966).
Griggs, D. T., and G. C. Kennedy: A simple apparatus for high pressures and temperatures. Am. J. Sci. 255, 722–735 (1956).
Khitarov, N. I.: New experimental work in the field of deepseated processes. Geochem. Inter. 3, 532–535 (1964).
Kitahara, S., and G. C. Kennedy: The quartz-coesite transition. J. Geophys. Res. 69, 5395–5400 (1964).
Luth, W. C., and C. O. Ingamells: Gel preparation of starting materials for hydrothermal experimentation. Am. Mineralogist 50, 255–258 (1965).
MacDonald, G. J. F.: Quartz-coesite stability relations at high temperatures and pressures. Am. J. Sci. 254, 713–721 (1956).
Newton, R. C.: Some calc-silicate equilibrium relations. Am. J. Sci. 264, 204–222 (1966).
—, and J. V. Smith: Investigations concerning the breakdown of albite at depth in the earth. J. Geol. 75, 268–286 (1967).
Schairer, J. F., and N. L. Bowen: The system Na2O-Al2O3-SiO2. Am. J. Sci. 254, 129–195 (1956).
Takahashi, T.: Factors influencing pressures in multi-anvil devices. In: High pressure measurements, ed. by Giardini and Lloyd, p. 240–244. Washington: Butterworths 1963.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Boettcher, A.L., Wyllie, P.J. The quartz-coesite transition measured in the presence of a silicate liquid and calibration of piston-cylinder apparatus. Contr. Mineral. and Petrol. 17, 224–232 (1968). https://doi.org/10.1007/BF00388945
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00388945